Smalltalk › Gemtalk › GLASS

3.0.0Beta5 and Seaside

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

6 messages Options

Phil

3.0.0Beta5 and Seaside

Is there a specific version of seaside that works in Beta5?

I loaded 3.0.5 but I get errors I haven't seen before in topaz:

When logging in with a linked session I get:

+-----------------------------------------------------------------------------+
| PROGRAM: topaz, Linear GemStone Interface (Linked Session) |
| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |
| BUILD: 64bit-25633 |
| BUILT FOR: Darwin (Mac) |
| MODE: 64 bit |
| RUNNING ON: 2-CPU 172.16.21.176 i386 (Darwin 10.8.0 ) 2330MHz MacBookPro2,1
| 2048MB |
| PROCESS ID: 1298 DATE: 07/02/11 09:12:18 EST |
| USER IDS: REAL=gemstone (8885) EFFECTIVE=gemstone (8885) |
|_____________________________________________________________________________|
Reading initialization file .topazini
topaz> login
[Info]: LNK client/gem GCI levels = 842/842
[Info]: User ID: DataCurator
[Info]: Repository: PTAI
[Info]: Session ID: 6
[Info]: GCI Client Host: <Linked>
[Info]: Page server PID: -1
[Info]: Login Time: 07/02/11 08:47:26.014 EST
ERROR: ProcessorScheduler __initialize has failed
check for errors in modifications to GsCurrentSession >> initialize
[07/02/11 08:47:26.034 EST]
gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1
successful login

I don't see the same error if the session is not linked, but i haven't checked the logs yet.

Also, I get the following error when executing the following code:

topaz 1> doit
WAGsSwazooAdaptor startGemServerOn: 8383
%
ERROR 2010 , (MessageNotUnderstood)
topaz 1>

The same code (with #startOn:) runs from a workspace in GemTools without a problem.

Has anyone else seen this?

Cheers,

Phil

James Foster-8

Re: 3.0.0Beta5 and Seaside

Hi Phil,

Starting with $GEMSTONE/bin/extent0.seaside.dbf, I was able to log out and log in again after loading Seaside 3.0.5. I've tested this on a Mac in 3.0.0Beta5 as well as the current release candidate (build 26095). The session initialization failure is probably related to GsPackagePolicy and loading session methods, but I don't know why it would fail for a linked Topaz and succeed for an RPC Topaz. You might set aside your extent and start over and see if you can login before loading Seaside. Also, if you disable the package policy (GsPackagePolicy current disable), then does the login work? If so, try adding some debugging code to GsPackagePolicy class>>#'loadSessionMethodDictionary' (you should do this as SystemUser) to see if you can determine where the error occurs (e.g., GsFile stdout cr; nextPutAll: 'got to line N').

Here is the only code I ran in the new extent:

topaz -l -T 50000 << EOF

run

MCPlatformSupport commitOnAlmostOutOfMemoryDuring: [

[

Gofer project load: 'Seaside30' version: '3.0.5'.

] on: Warning do: [:ex | ex resume ].

System commitTransaction.

logout

exit

EOF

James

On Jul 1, 2011, at 7:45 PM, Phil wrote:

Is there a specific version of seaside that works in Beta5?

I loaded 3.0.5 but I get errors I haven't seen before in topaz:

When logging in with a linked session I get:

+-----------------------------------------------------------------------------+
| PROGRAM: topaz, Linear GemStone Interface (Linked Session) |
| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |
| BUILD: 64bit-25633 |
| BUILT FOR: Darwin (Mac) |
| MODE: 64 bit |
| RUNNING ON: 2-CPU 172.16.21.176 i386 (Darwin 10.8.0 ) 2330MHz MacBookPro2,1
| 2048MB |
| PROCESS ID: 1298 DATE: 07/02/11 09:12:18 EST |
| USER IDS: REAL=gemstone (8885) EFFECTIVE=gemstone (8885) |
|_____________________________________________________________________________|
Reading initialization file .topazini
topaz> login
[Info]: LNK client/gem GCI levels = 842/842
[Info]: User ID: DataCurator
[Info]: Repository: PTAI
[Info]: Session ID: 6
[Info]: GCI Client Host: <Linked>
[Info]: Page server PID: -1
[Info]: Login Time: 07/02/11 08:47:26.014 EST
ERROR: ProcessorScheduler __initialize has failed
check for errors in modifications to GsCurrentSession >> initialize
[07/02/11 08:47:26.034 EST]
gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1
successful login

I don't see the same error if the session is not linked, but i haven't checked the logs yet.

Also, I get the following error when executing the following code:

topaz 1> doit
WAGsSwazooAdaptor startGemServerOn: 8383
%
ERROR 2010 , (MessageNotUnderstood)
topaz 1>

The same code (with #startOn:) runs from a workspace in GemTools without a problem.

Has anyone else seen this?

Cheers,

Phil

Phil

Re: 3.0.0Beta5 and Seaside

Hi James,

Thanks for the hint. I still get the same error, but I'm now thinking it could be something with my machine.

Following is the session starting from a fresh extent:

puppy:~ phil$ startnetldi -g

startnetldi[Info]: GemStone version '3.0.0Beta5'

startnetldi[Info]: Starting GemStone network server 'gs64ldi'.

startnetldi[Info]: GEMSTONE is: '/opt/gemstone/product'.

startnetldi[Info]: Log file is '/usr/local/opt/gemstone/log/gs64ldi.log'.

startnetldi[Info]: GemStone server 'gs64ldi' has been started.

puppy:~ phil$ startstone PTAI

startstone[Info]: GemStone version '3.0.0Beta5'

startstone[Info]: Starting Stone repository monitor 'PTAI'.

startstone[Info]: GEMSTONE is: '/opt/gemstone/product'.

startstone[Info]:

GEMSTONE_SYS_CONF=/usr/local/gemstone/3.0.0-Beta5/data/system.conf

GEMSTONE_EXE_CONF=/Users/phil/PTAI.conf

startstone[Info]: Log file is '/usr/local/gemstone/3.0.0-Beta5/data/PTAI.log'.

startstone[Info]: GemStone server 'PTAI' has been started.

puppy:~ phil$ topaz -l

_____________________________________________________________________________

| Configuration Files |

| |

| System File: /usr/local/gemstone/3.0.0-Beta5/data/system.conf |

| |

| Executable File: /Users/phil/gem.conf |

| Warning: File not found (errno=2,ENOENT, The file or directory specified cannot

| be found) |

| using defaults. |

|_____________________________________________________________________________|

_____________________________________________________________________________

| Gem Configuration Options for process id 7673 |

|_____________________________________________________________________________|

DUMP_OPTIONS = TRUE;

GEM_GCI_LOG_ENABLED = FALSE;

GEM_ABORT_MAX_CRS = 0;

GEM_FREE_FRAME_CACHE_SIZE = -1;

GEM_FREE_FRAME_LIMIT = -1;

GEM_FREE_PAGEIDS_CACHE = 200;

GEM_HALT_ON_ERROR = 0;

GEM_IO_LIMIT = 5000;

GEM_KEEP_MIN_SOFTREFS = 0;

GEM_MAX_SMALLTALK_STACK_DEPTH = 1000;

GEM_NATIVE_CODE_ENABLED = TRUE;

GEM_PRIVATE_PAGE_CACHE_KB = 960;

GEM_PGSVR_COMPRESS_PAGE_TRANSFERS = FALSE;

GEM_PGSVR_FREE_FRAME_CACHE_SIZE = -1;

GEM_PGSVR_FREE_FRAME_LIMIT = -1;

GEM_PGSVR_UPDATE_CACHE_ON_READ = FALSE;

GEM_RPC_KEEPALIVE_INTERVAL = 0;

GEM_RPCGCI_TIMEOUT = 0;

GEM_SOFTREF_CLEANUP_PERCENT_MEM = 50;

GEM_TEMPOBJ_AGGRESSIVE_STUBBING = TRUE;

GEM_TEMPOBJ_CACHE_SIZE = 500000;

GEM_TEMPOBJ_MESPACE_SIZE = 0;

GEM_TEMPOBJ_OOPMAP_SIZE = 0;

GEM_TEMPOBJ_SCOPES_SIZE = 2000;

GEM_TEMPOBJ_POMGEN_SIZE = 0;

GEM_TEMPOBJ_POMGEN_PRUNE_ON_VOTE = 50;

GEM_TEMPOBJ_POMGEN_SCAVENGE_INTERVAL = 1800;

LOG_WARNINGS = TRUE;

SHR_NUM_FREE_FRAME_SERVERS = 1;

SHR_PAGE_CACHE_NUM_PROCS = 10233;

SHR_PAGE_CACHE_NUM_SHARED_COUNTERS = 1900;

SHR_PAGE_CACHE_SIZE_KB = 75000;

SHR_TARGET_FREE_FRAME_COUNT = -1;

SHR_WELL_KNOWN_PORT_NUMBER = 0;

(vmGc spaceSizes: eden init 2000K max 93736K , survivor init 400K max 15632K,

vmGc old max 375000K, code max 100000K, perm max 50000K, pom 10 * 41672K = 416720K,

vmGc remSet 9436K, meSpace max 477900K oopMapSize 4194304 )

_____________________________________________________________________________

| GemStone/S64 Object-Oriented Data Management System |

| Copyright (C) GemStone Systems, Inc. 1986-2011 |

| Covered by U.S Patents: |

| 6,256,637 Transactional virtual machine architecture |

| 6,360,219 Object queues with concurrent updating |

| 6,567,905 Generational Garbage Collector. |

| 6,681,226 Selective Pessimistic Locking for a Concurrently Updateable Database

+-----------------------------------------------------------------------------+

| PROGRAM: topaz, Linear GemStone Interface (Linked Session) |

| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |

| BUILD: 64bit-25633 |

| BUILT FOR: Darwin (Mac) |

| MODE: 64 bit |

| RUNNING ON: 2-CPU <omitted> i386 (Darwin 10.8.0 ) 2330MHz MacBookPro2,1

| 2048MB |

| PROCESS ID: 7673 DATE: 07/09/11 11:27:55 EST |

| USER IDS: REAL=phil (1025) EFFECTIVE=phil (1025) |

|_____________________________________________________________________________|

Reading initialization file .topazini

topaz> login

[Info]: LNK client/gem GCI levels = 842/842

[Info]: User ID: DataCurator

[Info]: Repository: PTAI

[Info]: Session ID: 5

[Info]: GCI Client Host: <Linked>

[Info]: Page server PID: -1

[Info]: Login Time: 07/09/11 11:27:57.204 EST

[07/09/11 11:27:57.978 EST]

gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1

successful login

topaz 1> run

MCPlatformSupport commitOnAlmostOutOfMemoryDuring: [

[

Gofer project load: 'Seaside30' version: '3.0.5'.

] on: Warning do: [:ex | ex resume ].

System commitTransaction.

--transcript--'Loading 3.0.5 of ConfigurationOfSeaside30...'

--transcript--'Fetched -> ConfigurationOfGrease-dkh.149 --- http://www.squeaksource.com/MetacelloRepository --- http://www.squeaksource.com/MetacelloRepository'

--transcript--'Loaded -> ConfigurationOfGrease-dkh.149 --- http://www.squeaksource.com/MetacelloRepository --- cache'

--transcript--'...finished 3.0.5'

true

topaz 1> logout

[Info]: Logging out at 07/09/11 11:37:59 EST

topaz> login

[Info]: LNK client/gem GCI levels = 842/842

[Info]: User ID: DataCurator

[Info]: Repository: PTAI

[Info]: Session ID: 6

[Info]: GCI Client Host: <Linked>

[Info]: Page server PID: -1

[Info]: Login Time: 07/09/11 11:38:02.984 EST

ERROR: ProcessorScheduler __initialize has failed

check for errors in modifications to GsCurrentSession >> initialize

[07/09/11 11:38:03.024 EST]

gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1

successful login

topaz 1> quit

Logging out session 1.

[Info]: Logging out at 07/09/11 11:38:18 EST

puppy:~ phil$ topaz

_____________________________________________________________________________

| GemStone/S64 Object-Oriented Data Management System |

| Copyright (C) GemStone Systems, Inc. 1986-2011 |

+-----------------------------------------------------------------------------+

| PROGRAM: topaz, Linear GemStone Interface (Remote Session) |

| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |

| BUILD: 64bit-25633 |

| BUILT FOR: Darwin (Mac) |

| MODE: 64 bit |

| RUNNING ON: 2-CPU <omitted> i386 (Darwin 10.8.0 ) 2330MHz MacBookPro2,1

| 2048MB |

| PROCESS ID: 7881 DATE: 07/09/11 11:38:20 EST |

| USER IDS: REAL=phil (1025) EFFECTIVE=phil (1025) |

|_____________________________________________________________________________|

Reading initialization file .topazini

topaz> login

[07/09/11 11:38:22.002 EST]

gci login: currSession 1 rpc gem processId 7883 OOB keep-alive interval 0

successful login

topaz 1> doit
GsPackagePolicy current disable
%
aGsPackagePolicy
topaz 1> commit
ERROR 2010 , (MessageNotUnderstood)

So, I started again with a fresh extent, this time disabling the Package Policy before installing seaside.

topaz 1> doit

GsPackagePolicy current disable

aGsPackagePolicy

topaz 1>

topaz 1> commit

ERROR 2010 , a MessageNotUnderstood occurred (error 2010), a ClassOrganizer class does not understand #'_resetCachedOrganizer' (MessageNotUnderstood)

topaz 1> quit

Hmmm...

When I get a chance, I'll clean up the 20 old versions of GS on this machine and try with a fresh install.

Cheers.

James Foster-8

Re: 3.0.0Beta5 and Seaside

Phil,

Actually, I get the same error (see below). I suspect that there is a step we are skipping. I'll investigate further and let you know...

James

vienna:gemstone jfoster$ rm product

vienna:gemstone jfoster$ ln -s GemStone64Bit3.0.0Beta5-i386.Darwin product

vienna:gemstone jfoster$ cp /opt/gemstone/product/bin/extent0.seaside.dbf ./data/seaside.dbf

vienna:gemstone jfoster$ chmod 600 ./data/seaside.dbf

vienna:gemstone jfoster$ startstone seaside

startstone[Info]: GemStone version '3.0.0Beta5'

startstone[Info]: Starting Stone repository monitor 'seaside'.

startstone[Info]: GEMSTONE is: '/opt/gemstone/product'.

startstone[Info]: GEMSTONE_NRS_ALL is: '#dir:/opt/gemstone#log:/opt/gemstone/log/%N_%P.log'.

startstone[Info]:

GEMSTONE_SYS_CONF=/opt/gemstone/etc/seaside.conf

GEMSTONE_EXE_CONF=/opt/gemstone/etc/seaside.conf

startstone[Info]: Log file is '/opt/gemstone/GemStone64Bit3.0.0Beta5-i386.Darwin/data/seaside.log'.

startstone[Info]: GemStone server 'seaside' has been started.

vienna:gemstone jfoster$

vienna:gemstone jfoster$ topaz -l -T 200000

DynLibLoadGsLib using $GEMSTONE=/opt/gemstone/product

DynLibLoadGsLib attempting to load /opt/gemstone/product/lib/libgcilnk

_____________________________________________________________________________

| Configuration Files |

| |

| System File: /opt/gemstone/etc/seaside.conf |

| |

| Executable File: /opt/gemstone/etc/gem.conf |

|_____________________________________________________________________________|

Using GEM_TEMPOBJ_CACHE_SIZE 200000 from -T command line option

_____________________________________________________________________________

| Gem Configuration Options for process id 11467 |

|_____________________________________________________________________________|

...

+-----------------------------------------------------------------------------+

| PROGRAM: topaz, Linear GemStone Interface (Linked Session) |

| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |

| BUILD: 64bit-25633 |

| BUILT FOR: Darwin (Mac) |

| MODE: 64 bit |

| RUNNING ON: 4-CPU vienna i386 (Darwin 10.8.0 ) 2400MHz MacBookPro6,2 2048MB |

| PROCESS ID: 11467 DATE: 07/10/11 21:13:47 PDT |

| USER IDS: REAL=jfoster (587) EFFECTIVE=jfoster (587) |

|_____________________________________________________________________________|

Reading initialization file .topazini

topaz> login

[Info]: LNK client/gem GCI levels = 842/842

[Info]: User ID: DataCurator

[Info]: Repository: seaside

[Info]: Session ID: 5

[Info]: GCI Client Host: <Linked>

[Info]: Page server PID: -1

[Info]: Login Time: 07/10/11 21:14:30.091 PDT

[07/10/11 21:14:30.111 PDT]

gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1

successful login

topaz 1> run

MCPlatformSupport commitOnAlmostOutOfMemoryDuring: [

[

Gofer project load: 'Seaside30' version: '3.0.5'.

] on: Warning do: [:ex | ex resume ].

System commitTransaction.

--transcript--'Loading 3.0.5 of ConfigurationOfSeaside30...'

...

--transcript--'Loaded -> Seaside-Adaptors-FastCGI-DaleHenrichs.25 --- http://seaside.gemstone.com/ss/Seaside30 --- cache'

--transcript--'...finished 3.0.5'

true

topaz 1> logout

[Info]: Logging out at 07/11/11 07:13:58 PDT

topaz> login

[Info]: LNK client/gem GCI levels = 842/842

[Info]: User ID: DataCurator

[Info]: Repository: seaside

[Info]: Session ID: 6

[Info]: GCI Client Host: <Linked>

[Info]: Page server PID: -1

[Info]: Login Time: 07/11/11 07:14:02.014 PDT

ERROR: ProcessorScheduler __initialize has failed

check for errors in modifications to GsCurrentSession >> initialize

[07/11/11 07:14:02.086 PDT]

gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1

successful login

From: "Phil" <[hidden email]>
To: "GemStone Seaside beta discussion" <[hidden email]>
Sent: Friday, July 8, 2011 10:12:43 PM
Subject: Re: [GS/SS Beta] 3.0.0Beta5 and Seaside

Hi James,

Thanks for the hint. I still get the same error, but I'm now thinking it could be something with my machine.

Following is the session starting from a fresh extent:

puppy:~ phil$ startnetldi -g

startnetldi[Info]: GemStone version '3.0.0Beta5'

startnetldi[Info]: Starting GemStone network server 'gs64ldi'.

startnetldi[Info]: GEMSTONE is: '/opt/gemstone/product'.

startnetldi[Info]: Log file is '/usr/local/opt/gemstone/log/gs64ldi.log'.

startnetldi[Info]: GemStone server 'gs64ldi' has been started.

puppy:~ phil$ startstone PTAI

startstone[Info]: GemStone version '3.0.0Beta5'

startstone[Info]: Starting Stone repository monitor 'PTAI'.

startstone[Info]: GEMSTONE is: '/opt/gemstone/product'.

startstone[Info]:

GEMSTONE_SYS_CONF=/usr/local/gemstone/3.0.0-Beta5/data/system.conf

GEMSTONE_EXE_CONF=/Users/phil/PTAI.conf

startstone[Info]: Log file is '/usr/local/gemstone/3.0.0-Beta5/data/PTAI.log'.

startstone[Info]: GemStone server 'PTAI' has been started.

puppy:~ phil$ topaz -l

_____________________________________________________________________________

| Configuration Files |

| |

| System File: /usr/local/gemstone/3.0.0-Beta5/data/system.conf |

| |

| Executable File: /Users/phil/gem.conf |

| Warning: File not found (errno=2,ENOENT, The file or directory specified cannot

| be found) |

| using defaults. |

|_____________________________________________________________________________|

_____________________________________________________________________________

| Gem Configuration Options for process id 7673 |

|_____________________________________________________________________________|

DUMP_OPTIONS = TRUE;

GEM_GCI_LOG_ENABLED = FALSE;

GEM_ABORT_MAX_CRS = 0;

GEM_FREE_FRAME_CACHE_SIZE = -1;

GEM_FREE_FRAME_LIMIT = -1;

GEM_FREE_PAGEIDS_CACHE = 200;

GEM_HALT_ON_ERROR = 0;

GEM_IO_LIMIT = 5000;

GEM_KEEP_MIN_SOFTREFS = 0;

GEM_MAX_SMALLTALK_STACK_DEPTH = 1000;

GEM_NATIVE_CODE_ENABLED = TRUE;

GEM_PRIVATE_PAGE_CACHE_KB = 960;

GEM_PGSVR_COMPRESS_PAGE_TRANSFERS = FALSE;

GEM_PGSVR_FREE_FRAME_CACHE_SIZE = -1;

GEM_PGSVR_FREE_FRAME_LIMIT = -1;

GEM_PGSVR_UPDATE_CACHE_ON_READ = FALSE;

GEM_RPC_KEEPALIVE_INTERVAL = 0;

GEM_RPCGCI_TIMEOUT = 0;

GEM_SOFTREF_CLEANUP_PERCENT_MEM = 50;

GEM_TEMPOBJ_AGGRESSIVE_STUBBING = TRUE;

GEM_TEMPOBJ_CACHE_SIZE = 500000;

GEM_TEMPOBJ_MESPACE_SIZE = 0;

GEM_TEMPOBJ_OOPMAP_SIZE = 0;

GEM_TEMPOBJ_SCOPES_SIZE = 2000;

GEM_TEMPOBJ_POMGEN_SIZE = 0;

GEM_TEMPOBJ_POMGEN_PRUNE_ON_VOTE = 50;

GEM_TEMPOBJ_POMGEN_SCAVENGE_INTERVAL = 1800;

LOG_WARNINGS = TRUE;

SHR_NUM_FREE_FRAME_SERVERS = 1;

SHR_PAGE_CACHE_NUM_PROCS = 10233;

SHR_PAGE_CACHE_NUM_SHARED_COUNTERS = 1900;

SHR_PAGE_CACHE_SIZE_KB = 75000;

SHR_TARGET_FREE_FRAME_COUNT = -1;

SHR_WELL_KNOWN_PORT_NUMBER = 0;

(vmGc spaceSizes: eden init 2000K max 93736K , survivor init 400K max 15632K,

vmGc old max 375000K, code max 100000K, perm max 50000K, pom 10 * 41672K = 416720K,

vmGc remSet 9436K, meSpace max 477900K oopMapSize 4194304 )

_____________________________________________________________________________

| GemStone/S64 Object-Oriented Data Management System |

| Covered by U.S Patents: |

| 6,256,637 Transactional virtual machine architecture |

| 6,360,219 Object queues with concurrent updating |

| 6,567,905 Generational Garbage Collector. |

| 6,681,226 Selective Pessimistic Locking for a Concurrently Updateable Database

+-----------------------------------------------------------------------------+

| PROGRAM: topaz, Linear GemStone Interface (Linked Session) |

| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |

| BUILD: 64bit-25633 |

| BUILT FOR: Darwin (Mac) |

| MODE: 64 bit |

| RUNNING ON: 2-CPU <omitted> i386 (Darwin 10.8.0 ) 2330MHz MacBookPro2,1

| 2048MB |

| PROCESS ID: 7673 DATE: 07/09/11 11:27:55 EST |

| USER IDS: REAL=phil (1025) EFFECTIVE=phil (1025) |

|_____________________________________________________________________________|

Reading initialization file .topazini

topaz> login

[Info]: LNK client/gem GCI levels = 842/842

[Info]: User ID: DataCurator

[Info]: Repository: PTAI

[Info]: Session ID: 5

[Info]: GCI Client Host: <Linked>

[Info]: Page server PID: -1

[Info]: Login Time: 07/09/11 11:27:57.204 EST

[07/09/11 11:27:57.978 EST]

gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1

successful login

topaz 1> run

MCPlatformSupport commitOnAlmostOutOfMemoryDuring: [

[

Gofer project load: 'Seaside30' version: '3.0.5'.

] on: Warning do: [:ex | ex resume ].

System commitTransaction.

--transcript--'Loading 3.0.5 of ConfigurationOfSeaside30...'

--transcript--'Fetched -> ConfigurationOfGrease-dkh.149 --- http://www.squeaksource.com/MetacelloRepository --- http://www.squeaksource.com/MetacelloRepository'

--transcript--'Loaded -> ConfigurationOfGrease-dkh.149 --- http://www.squeaksource.com/MetacelloRepository --- cache'

--transcript--'...finished 3.0.5'

true

topaz 1> logout

[Info]: Logging out at 07/09/11 11:37:59 EST

topaz> login

[Info]: LNK client/gem GCI levels = 842/842

[Info]: User ID: DataCurator

[Info]: Repository: PTAI

[Info]: Session ID: 6

[Info]: GCI Client Host: <Linked>

[Info]: Page server PID: -1

[Info]: Login Time: 07/09/11 11:38:02.984 EST

ERROR: ProcessorScheduler __initialize has failed

check for errors in modifications to GsCurrentSession >> initialize

[07/09/11 11:38:03.024 EST]

gci login: currSession 1 rpc gem processId -1 OOB keep-alive interval -1

successful login

topaz 1> quit

Logging out session 1.

[Info]: Logging out at 07/09/11 11:38:18 EST

puppy:~ phil$ topaz

_____________________________________________________________________________

| GemStone/S64 Object-Oriented Data Management System |

+-----------------------------------------------------------------------------+

| PROGRAM: topaz, Linear GemStone Interface (Remote Session) |

| VERSION: 3.0.0Beta5, Mon Apr 4 15:38:48 2011 |

| BUILD: 64bit-25633 |

| BUILT FOR: Darwin (Mac) |

| MODE: 64 bit |

| RUNNING ON: 2-CPU <omitted> i386 (Darwin 10.8.0 ) 2330MHz MacBookPro2,1

| 2048MB |

| PROCESS ID: 7881 DATE: 07/09/11 11:38:20 EST |

| USER IDS: REAL=phil (1025) EFFECTIVE=phil (1025) |

|_____________________________________________________________________________|

Reading initialization file .topazini

topaz> login

[07/09/11 11:38:22.002 EST]

gci login: currSession 1 rpc gem processId 7883 OOB keep-alive interval 0

successful login

topaz 1> doit
GsPackagePolicy current disable
%
aGsPackagePolicy
topaz 1> commit
ERROR 2010 , (MessageNotUnderstood)

So, I started again with a fresh extent, this time disabling the Package Policy before installing seaside.

topaz 1> doit

GsPackagePolicy current disable

aGsPackagePolicy

topaz 1>

topaz 1> commit

ERROR 2010 , a MessageNotUnderstood occurred (error 2010), a ClassOrganizer class does not understand #'_resetCachedOrganizer' (MessageNotUnderstood)

topaz 1> quit

Hmmm...

When I get a chance, I'll clean up the 20 old versions of GS on this machine and try with a fresh install.

Cheers.

James Foster-8

Re: 3.0.0Beta5 and Seaside

<base href="x-msg://50/">Phil,

I've entered a GLASS bug report (http://code.google.com/p/glassdb/issues/detail?id=279) on this. As a short-term work-around, try adding the method TransientRandom>>#'open' that does nothing.

James

From: "Phil" <[hidden email]>
To: "GemStone Seaside beta discussion" <[hidden email]>
Sent: Friday, July 8, 2011 10:12:43 PM
Subject: Re: [GS/SS Beta] 3.0.0Beta5 and Seaside

Hi James,

Thanks for the hint. I still get the same error ...

Dale Henrichs

Re: 3.0.0Beta5 and Seaside

In reply to this post by Phil