[ANN] AidaWeb is available to use in Cuis Smalltalk
Locked
 
|
Hi Folks,
It's a pleasure inform that AidaWeb is available to use in Cuis Smalltalk in the repo: https://github.com/garduino/Cuis-Aida Thanks to the job of Janko to make the port to make it work in Cuis! You can install it on a Cuis image using the script of the README (be patient, the installation take time) or you can download a ready to use Cog image from the link provided in the same README. Enjoy! Coming Soon: A Morphic operator console for easier manage of Swazoo sites. Juan: You should update the ListOfPackages, as usual :) -- Sincerely, Germán Arduino about.me/garduino |
Re: [ANN] AidaWeb is available to use in Cuis Smalltalk
|
|
Que excelente noticia!! felicitaciones!
Vamos Geman todavia! On Tue, Jan 29, 2013 at 12:01 PM, Germán Arduino <[hidden email]> wrote: > ** > > > Hi Folks, > > It's a pleasure inform that AidaWeb is available to use in Cuis > Smalltalk in the repo: https://github.com/garduino/Cuis-Aida > > Thanks to the job of Janko to make the port to make it work in Cuis! > > You can install it on a Cuis image using the script of the README (be > patient, the installation take time) or you can download a ready > to use Cog image from the link provided in the same README. > > Enjoy! > > Coming Soon: A Morphic operator console for easier manage of Swazoo sites. > > Juan: You should update the ListOfPackages, as usual :) > > -- > Sincerely, > Germán Arduino > about.me/garduino > > -- *Hernán Wilkinson Agile Software Development, Teaching & Coaching* *Phone: +54 - 011 - *6091 - 3125* Mobile: +54 - 911 - 4470 - 7207 email: [hidden email] site: http://www.10Pines.com <http://www.10pines.com/>* Address: Alem 693, Floor 5 B, Buenos Aires, Argentina |
Re: [ANN] AidaWeb is available to use in Cuis Smalltalk
|
|
In reply to this post by garduino
Lo vi en la lista de Aida.
De nuevo felicitaciones y esperemos que el nuevo Board se tome en serio hacer una imagen pequeña compatible. Edgar |
|
|
In reply to this post by hernan.wilkinson
Hola Hernán, gracias! Pero yo sólo hice el port de Sport y Swazoo y el
filein inicial de Aida, el ajuste "fino" lo hizo Janko, yo sólo lo publico "a la Cuis" (GitHub) y trataré de ayudar en mantener los ports. Mi idea de los ports, es juntar la intersección de mis propias necesidades y las de eventualmente otras personas y tratar de aportar algunos paquetes para que más gente tenga menos excusas para no usar Cuis :) De a poco vamos teniendo muchas de las cosas que se necesitan y por suerte ninguna de las que no se necesitan :) Saludos! 2013/1/29 Hernan Wilkinson <[hidden email]> > ** > > > Que excelente noticia!! felicitaciones! > Vamos Geman todavia! > > > On Tue, Jan 29, 2013 at 12:01 PM, Germán Arduino <[hidden email]>wrote: > >> ** >> >> >> Hi Folks, >> >> It's a pleasure inform that AidaWeb is available to use in Cuis >> Smalltalk in the repo: https://github.com/garduino/Cuis-Aida >> >> Thanks to the job of Janko to make the port to make it work in Cuis! >> >> You can install it on a Cuis image using the script of the README (be >> patient, the installation take time) or you can download a ready >> to use Cog image from the link provided in the same README. >> >> Enjoy! >> >> Coming Soon: A Morphic operator console for easier manage of Swazoo sites. >> >> Juan: You should update the ListOfPackages, as usual :) >> >> -- >> Sincerely, >> Germán Arduino >> about.me/garduino >> > > > > -- > *Hernán Wilkinson > Agile Software Development, Teaching & Coaching* > *Phone: +54 - 011 - *6091 - 3125* > Mobile: +54 - 911 - 4470 - 7207 > email: [hidden email] > site: http://www.10Pines.com <http://www.10pines.com/>* > Address: Alem 693, Floor 5 B, Buenos Aires, Argentina > > > |
|
|
In reply to this post by Edgar De Cleene
Gracias Edgar. Repito, sólo hice una parte y algunos otros paquetes que
necesito. Y en cuanto a Squeak y Pharo, excelente, todo bien, espero que les vaya de la mejor manera posible y ayudaré cuando pueda en lo que pueda, pero no son para mi (hoy por hoy Pharo menos que Squeak a pesar que yo me había volcado a él pero pronto me dejó fuera de juego), por eso me quedé con Cuis, porque ya no necesito esperar nada, ahí está lo que quiero y me sirve, y lo tengo acá a mano al "autor" para intercambiar ideas y puedo tener más control de mis propias cosas. Pero bueno, como todo en la vida, son cosas discutibles e ideas personales. También tengo en la lista de inquietudes terminar de entender S8/U8 pero por ahora no tengo el tiempo. Saludos. El 29 de enero de 2013 16:33, Edgar J. De Cleene <[hidden email]>escribió: > ** > > > Lo vi en la lista de Aida. > De nuevo felicitaciones y esperemos que el nuevo Board se tome en serio > hacer una imagen pequeña compatible. > > Edgar > > > > -- Sincerely, Germán Arduino about.me/garduino |
Re: [ANN] AidaWeb is available to use in Cuis Smalltalk
|
|
In reply to this post by garduino
Felicitaciones Germán !!!
Tu aporte servirá sin duda para que Smalltalk no se transforme en una especie en extinción ;-) Te mando un fuerte Abrazo, Francisco El mar, 29-01-2013 a las 12:01 -0300, Germán Arduino escribió: > > Hi Folks, > > It's a pleasure inform that AidaWeb is available to use in Cuis > Smalltalk in the repo: https://github.com/garduino/Cuis-Aida > > Thanks to the job of Janko to make the port to make it work in Cuis! > > You can install it on a Cuis image using the script of the README (be > patient, the installation take time) or you can download a ready > to use Cog image from the link provided in the same README. > > Enjoy! > > Coming Soon: A Morphic operator console for easier manage of Swazoo > sites. > > Juan: You should update the ListOfPackages, as usual :) > > > > |
|
|
Gracias Francisco!
2013/1/29 Francisco A. Lizarralde <[hidden email]> > ** > > > Felicitaciones Germán !!! > > Tu aporte servirá sin duda para que Smalltalk no se transforme en una > especie en extinción ;-) > > Te mando un fuerte Abrazo, > > Francisco > > El mar, 29-01-2013 a las 12:01 -0300, Germán Arduino escribió: > > > > > Hi Folks, > > > > It's a pleasure inform that AidaWeb is available to use in Cuis > > Smalltalk in the repo: https://github.com/garduino/Cuis-Aida > > > > Thanks to the job of Janko to make the port to make it work in Cuis! > > > > You can install it on a Cuis image using the script of the README (be > > patient, the installation take time) or you can download a ready > > to use Cog image from the link provided in the same README. > > > > Enjoy! > > > > Coming Soon: A Morphic operator console for easier manage of Swazoo > > sites. > > > > Juan: You should update the ListOfPackages, as usual :) > > > > > > > > > > > -- Sincerely, Germán Arduino about.me/garduino |
|
|
In reply to this post by garduino
Hi Robert:
Yes, this is the problem of line feeds that seems to be hard to kill :) In my case, I'm having this behavior only in Windows. I not found yet the way that the GitHub windows client avoid this bad formatting when synching with my local repos. The solution is, as Juan explained, previous to install select all the code in the lower pane of the FileList (Get entire file if is a big file) and then: select all (cmd a) Convert line endings to LF characters (Cuis convention) in selection (cmd U) save (cmd s) and then install. HTH 2013/1/29 Robert Calco <[hidden email]>: > One minor issue -- on Windows, my Cuis+Aida image source for all the > packages added for this port seem to have extra spaces between source code > lines with paragraph symbol that appear at the end of each line as well in > the System Browser. I have not seen that before and although it doesn't > affect the behavior of anything it is unusual. > > Otherwise this is really great! Very exciting to see progress on this! > > - Bob > > > On Tue, Jan 29, 2013 at 10:01 AM, Germán Arduino <[hidden email]> wrote: >> >> Hi Folks, >> >> It's a pleasure inform that AidaWeb is available to use in Cuis >> Smalltalk in the repo: https://github.com/garduino/Cuis-Aida >> >> Thanks to the job of Janko to make the port to make it work in Cuis! >> >> You can install it on a Cuis image using the script of the README (be >> patient, the installation take time) or you can download a ready >> to use Cog image from the link provided in the same README. >> >> Enjoy! >> >> Coming Soon: A Morphic operator console for easier manage of Swazoo sites. >> >> Juan: You should update the ListOfPackages, as usual :) >> >> >> -- >> Sincerely, >> Germán Arduino >> about.me/garduino >> >> _______________________________________________ >> Cuis mailing list >> [hidden email] >> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org > > > > > -- > Bob Calco > 25325 Geddy Dr. > Land O'Lakes, FL 34639 > > [hidden email] > 813-406-5019 (landline) > 813-520-2891 (mobile) > > _______________________________________________ > Cuis mailing list > [hidden email] > http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org > |
|
|
Hi Hannes, I remember, but to be honest I use Mac or Lubuntu.
Only very few times I use some Windows machine and really I do not have time to invest in Windows...... 2013/1/29 H. Hirzel <[hidden email]>: > Hello > > Angel Lopez gave some links about CR/LF issues in Windows in > connection with github, > > http://www.jvuletich.org/pipermail/cuis_jvuletich.org/2013-January/000620.html > > Kind regards > Hannes > > On 1/29/13, Germán Arduino <[hidden email]> wrote: >> Hi Robert: >> >> Yes, this is the problem of line feeds that seems to be hard to kill :) >> >> In my case, I'm having this behavior only in Windows. I not found yet >> the way that the GitHub windows client avoid this bad formatting when >> synching with my local repos. >> >> The solution is, as Juan explained, previous to install select all the >> code in the lower pane of the FileList (Get entire file if is a big >> file) and then: >> >> select all (cmd a) >> Convert line endings to LF characters (Cuis convention) in selection (cmd >> U) >> save (cmd s) >> >> and then install. >> >> HTH >> >> >> 2013/1/29 Robert Calco <[hidden email]>: >>> One minor issue -- on Windows, my Cuis+Aida image source for all the >>> packages added for this port seem to have extra spaces between source >>> code >>> lines with paragraph symbol that appear at the end of each line as well >>> in >>> the System Browser. I have not seen that before and although it doesn't >>> affect the behavior of anything it is unusual. >>> >>> Otherwise this is really great! Very exciting to see progress on this! >>> >>> - Bob >>> >>> >>> On Tue, Jan 29, 2013 at 10:01 AM, Germán Arduino <[hidden email]> >>> wrote: >>>> >>>> Hi Folks, >>>> >>>> It's a pleasure inform that AidaWeb is available to use in Cuis >>>> Smalltalk in the repo: https://github.com/garduino/Cuis-Aida >>>> >>>> Thanks to the job of Janko to make the port to make it work in Cuis! >>>> >>>> You can install it on a Cuis image using the script of the README (be >>>> patient, the installation take time) or you can download a ready >>>> to use Cog image from the link provided in the same README. >>>> >>>> Enjoy! >>>> >>>> Coming Soon: A Morphic operator console for easier manage of Swazoo >>>> sites. >>>> >>>> Juan: You should update the ListOfPackages, as usual :) >>>> >>>> >>>> -- >>>> Sincerely, >>>> Germán Arduino >>>> about.me/garduino >>>> >>>> _______________________________________________ >>>> Cuis mailing list >>>> [hidden email] >>>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org >>> >>> >>> >>> >>> -- >>> Bob Calco >>> 25325 Geddy Dr. >>> Land O'Lakes, FL 34639 >>> >>> [hidden email] >>> 813-406-5019 (landline) >>> 813-520-2891 (mobile) >>> >>> _______________________________________________ >>> Cuis mailing list >>> [hidden email] >>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org >>> >> >> _______________________________________________ >> Cuis mailing list >> [hidden email] >> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org >> > > _______________________________________________ > Cuis mailing list > [hidden email] > http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org |
|
|
In reply to this post by garduino
---------- Forwarded message ----------
From: Germán Arduino <[hidden email]> Date: 2013/1/30 Subject: Re: [Cuis] [ANN] AidaWeb is available to use in Cuis Smalltalk To: Discussion of Cuis Smalltalk <[hidden email]> Cc: AIDA/Web general discussion list <[hidden email]> Hi: All the cr & lf & extra lines are gone now. You can download the image again from the same url or install from scratch from GitHub. Germán. 2013/1/29 Germán Arduino <[hidden email]>: > Hi Robert: > > Yes, this is the problem of line feeds that seems to be hard to kill :) > > In my case, I'm having this behavior only in Windows. I not found yet > the way that the GitHub windows client avoid this bad formatting when > synching with my local repos. > > The solution is, as Juan explained, previous to install select all the > code in the lower pane of the FileList (Get entire file if is a big > file) and then: > > select all (cmd a) > Convert line endings to LF characters (Cuis convention) in selection (cmd U) > save (cmd s) > > and then install. > > HTH > > > 2013/1/29 Robert Calco <[hidden email]>: >> One minor issue -- on Windows, my Cuis+Aida image source for all the >> packages added for this port seem to have extra spaces between source code >> lines with paragraph symbol that appear at the end of each line as well in >> the System Browser. I have not seen that before and although it doesn't >> affect the behavior of anything it is unusual. >> >> Otherwise this is really great! Very exciting to see progress on this! >> >> - Bob >> >> >> On Tue, Jan 29, 2013 at 10:01 AM, Germán Arduino <[hidden email]> wrote: >>> >>> Hi Folks, >>> >>> It's a pleasure inform that AidaWeb is available to use in Cuis >>> Smalltalk in the repo: https://github.com/garduino/Cuis-Aida >>> >>> Thanks to the job of Janko to make the port to make it work in Cuis! >>> >>> You can install it on a Cuis image using the script of the README (be >>> patient, the installation take time) or you can download a ready >>> to use Cog image from the link provided in the same README. >>> >>> Enjoy! >>> >>> Coming Soon: A Morphic operator console for easier manage of Swazoo sites. >>> >>> Juan: You should update the ListOfPackages, as usual :) >>> >>> >>> -- >>> Sincerely, >>> Germán Arduino >>> about.me/garduino >>> >>> _______________________________________________ >>> Cuis mailing list >>> [hidden email] >>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org >> >> >> >> >> -- >> Bob Calco >> 25325 Geddy Dr. >> Land O'Lakes, FL 34639 >> >> [hidden email] >> 813-406-5019 (landline) >> 813-520-2891 (mobile) >> >> _______________________________________________ >> Cuis mailing list >> [hidden email] >> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org >> -- Sincerely, Germán Arduino about.me/garduino |
«
Return to Español (Spanish)
|
1 view|%1 views
| Free forum by Nabble | Edit this page |