ConfigurationOfSeaside 1.0.3 is available

ConfigurationOfSeaside is Metacello configuration that provides easy access to Seaside2.8 or Seaside3.0, Magritte and Pier for Squeak and Pharo (soon GemStone, too).

To download ConfigurationOfSeaside evaluate the follow expression in Pharo:

  (Smalltalk at: #Gofer) new
    squeaksource: 'MetacelloRepository';
    package: 'ConfigurationOfSeaside';
    load.

or the following expressio in Squeak:

  (Installer squeaksource
    project: 'MetacelloRepository';
    packagesMatching: 'ConfigurationOfSeaside-*') first install.

After downloading ConfigurationOfSeaside evaluate one of the following expressions:

  ConfigurationOfSeaside project latestVersion
    load: #('Seaside 2.8' 'Seaside 2.8 Examples' 'Magritte Tests' 'Pier Tests'
            'Pier AddOns').

or

  ConfigurationOfSeaside project latestVersion
    load: #('Seaside 3.0' 'Seaside 3.0 Tests' 'Magritte2 Tests' 'Pier2 Tests'
            'Pier2 AddOns').

depending upon whether you want to work with Seaside3.0 or Seaside2.8. Both Seaside 3.0 and Seaside 2.8 cannot coexist in the same image, so you have to make a choice.

You can edit the literal array to include only the components that you want loaded into your image.

If you want the latest bleeding edge mcz files for Seaside3.0, Magritte, and Pier evaluate the following expression:

  (Smalltalk at: #Gofer) new
    squeaksource: 'MetacelloRepository';
    package: 'ConfigurationOfPier';
    load.
  ((Smalltalk at: #ConfigurationOfPier) project
    version: '2.0.3-baseline') load: 'ALL'.

Version 1.0.3 is based upon the latest mcz files in the collective Seaside repositories as of this afternoon PST.

I've tested ConfigurationOfSeaside on Squeak (trunk and Squeak3.10.2-7179-basic) and Pharo (PharoCore-1.0-10508rc2). Note that there was an issue with loading Psome Pier2 code into Squeak3.10.2-7179-basic. The same code loaded fine into the Squeak trunk.

If you want finer control over what is loaded into your image, you can pick and choose from the following Metacello configurations in http://www.squeaksource.com/MetacelloRepository:

  "Seaside 2.8"
  ConfigurationOfSeaside28
  ConfigurationOfSeaside28Examples
  ConfigurationOfMagritte
  ConfigurationOfPier
  ConfigurationOfPierAddOns

  "Seaside 3.0"
  ConfigurationOfSeaside30
  ConfigurationOfMagritte2
  ConfigurationOfPier2
  ConfigurationOfPierAddOns2

As you can imagine, it is easier to use ConfigurationOfSeaside to get started.

Dale
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki

Thank you Dale, Lukas and others) It saves a lot of work to install  
this way, only about two hours.
I get an "MessageNotUnderstood: ByteArray>>isByteString" (reported by  
my browser as an internal server error when I visit http://localhost:8080/pier

I followed (both in Pharo and Squeak Trunk-9560) your instructions  
precisely for installing Seaside 3.0. No errors at all, great!  
(Loading the ConfigurationOfSeaside took a lot longer, however).

I then evaluated in a Workspace the following expression:

PRDistribution new register.

And pointed my Browser to http://localhost:8080/pier
I then get the "Welcome to Pier" frontpage but without the nice  
layout, like the CSS is missing.
My Safari browser reports (in the activity window) for one of the  
files generated by Pier: internal server error
If I try to load only this file I get a html page :  
"MessageNotUnderstood: ByteArray>>isByteString"

Can anyone help me out how/where to fix this?
The error is exactly the same in Pharo and Squeak Trunk, so I guess it  
must be somewhere in Pier 3.0?

Much appreciated,

Merik

On Mar 2, 2010, at 2:12 AM, Dale Henrichs wrote:

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki

Merik,

It looks like you can patch the problem by modifying MAFileModelHandler>>handleFiltered by changing the following line:

    nextPutAll: self model contents readStream contents;

to:

    nextPutAll: self model contents asString readStream contents;

Dale
----- "Merik Voswinkel" <[hidden email]> wrote:

| Thank you Dale, Lukas and others) It saves a lot of work to install  
| this way, only about two hours.
| I get an "MessageNotUnderstood: ByteArray>>isByteString" (reported by
|
| my browser as an internal server error when I visit
| http://localhost:8080/pier
|
| I followed (both in Pharo and Squeak Trunk-9560) your instructions  
| precisely for installing Seaside 3.0. No errors at all, great!  
| (Loading the ConfigurationOfSeaside took a lot longer, however).
|
| I then evaluated in a Workspace the following expression:
|
| PRDistribution new register.
|
| And pointed my Browser to http://localhost:8080/pier
| I then get the "Welcome to Pier" frontpage but without the nice  
| layout, like the CSS is missing.
| My Safari browser reports (in the activity window) for one of the  
| files generated by Pier: internal server error
| If I try to load only this file I get a html page :  
| "MessageNotUnderstood: ByteArray>>isByteString"
|
| Can anyone help me out how/where to fix this?
| The error is exactly the same in Pharo and Squeak Trunk, so I guess it
|  
| must be somewhere in Pier 3.0?
|
| Much appreciated,
|
| Merik
|
| On Mar 2, 2010, at 2:12 AM, Dale Henrichs wrote:
|
| > ConfigurationOfSeaside is Metacello configuration that provides easy
|  
| > access to Seaside2.8 or Seaside3.0, Magritte and Pier for Squeak and
|  
| > Pharo (soon GemStone, too).
| >
| > To download ConfigurationOfSeaside evaluate the follow expression in
|  
| > Pharo:
| >
| >  (Smalltalk at: #Gofer) new
| >    squeaksource: 'MetacelloRepository';
| >    package: 'ConfigurationOfSeaside';
| >    load.
| >
| > or the following expressio in Squeak:
| >
| >  (Installer squeaksource
| >    project: 'MetacelloRepository';
| >    packagesMatching: 'ConfigurationOfSeaside-*') first install.
| >
| > After downloading ConfigurationOfSeaside evaluate one of the  
| > following expressions:
| >
| >  ConfigurationOfSeaside project latestVersion
| >    load: #('Seaside 2.8' 'Seaside 2.8 Examples' 'Magritte Tests'  
| > 'Pier Tests'
| >            'Pier AddOns').
| >
| > or
| >
| >  ConfigurationOfSeaside project latestVersion
| >    load: #('Seaside 3.0' 'Seaside 3.0 Tests' 'Magritte2 Tests'  
| > 'Pier2 Tests'
| >            'Pier2 AddOns').
| >
| > depending upon whether you want to work with Seaside3.0 or  
| > Seaside2.8. Both Seaside 3.0 and Seaside 2.8 cannot coexist in the
|
| > same image, so you have to make a choice.
| >
| > You can edit the literal array to include only the components that
|
| > you want loaded into your image.
| >
| > If you want the latest bleeding edge mcz files for Seaside3.0,  
| > Magritte, and Pier evaluate the following expression:
| >
| >  (Smalltalk at: #Gofer) new
| >    squeaksource: 'MetacelloRepository';
| >    package: 'ConfigurationOfPier';
| >    load.
| >  ((Smalltalk at: #ConfigurationOfPier) project
| >    version: '2.0.3-baseline') load: 'ALL'.
| >
| > Version 1.0.3 is based upon the latest mcz files in the collective
|
| > Seaside repositories as of this afternoon PST.
| >
| > I've tested ConfigurationOfSeaside on Squeak (trunk and  
| > Squeak3.10.2-7179-basic) and Pharo (PharoCore-1.0-10508rc2). Note  
| > that there was an issue with loading Psome Pier2 code into  
| > Squeak3.10.2-7179-basic. The same code loaded fine into the Squeak
|
| > trunk.
| >
| > If you want finer control over what is loaded into your image, you
|
| > can pick and choose from the following Metacello configurations in
| http://www.squeaksource.com/MetacelloRepository 
| > :
| >
| >  "Seaside 2.8"
| >  ConfigurationOfSeaside28
| >  ConfigurationOfSeaside28Examples
| >  ConfigurationOfMagritte
| >  ConfigurationOfPier
| >  ConfigurationOfPierAddOns
| >
| >  "Seaside 3.0"
| >  ConfigurationOfSeaside30
| >  ConfigurationOfMagritte2
| >  ConfigurationOfPier2
| >  ConfigurationOfPierAddOns2
| >
| > As you can imagine, it is easier to use ConfigurationOfSeaside to  
| > get started.
| >
| > Dale
| > _______________________________________________
| > Magritte, Pier and Related Tools ...
| > https://www.iam.unibe.ch/mailman/listinfo/smallwiki
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki

Merik,

When I try http://localhost:8080/seaside/files/ I get "Error: "/seaside/files/" not found", so I will need a little more info...

Dale

----- "Merik Voswinkel" <[hidden email]> wrote:

| I also installed Seaside 2.8. I also executed PRDistribution new  
| register. I then visited http://localhost:8080/seaside/pier (note the
|
| '/seaside/pier/' and I do get the generated CSS here. But now all the
|
| files starting with url 'http://localhost:8080/seaside/files/' give  
| the error:
| "Internal Server ErrorError: This message is not appropriate for this
|
| object"
|
| Is this fixable in one of the config files that the  
| ConfigurationOfSeaside script loads?
|
| I forgot to type the name Pharo in my previous post:
| > (Loading the ConfigurationOfSeaside took a lot longer in Pharo than
|
| > in Squeak trunk, however).
|
|
| An unrelated question, can I get the debug option in the web error  
| pages back?
|
|
| Cheers,
|
| Merik
|
|
|
| On Mar 2, 2010, at 1:36 PM, Merik Voswinkel wrote:
|
| > Thank you Dale, Lukas and others) It saves a lot of work to install
|
| > this way, only about two hours.
| > I get an "MessageNotUnderstood: ByteArray>>isByteString" (reported
|
| > by my browser as an internal server error when I visit
| http://localhost:8080/pier
| >
| > I followed (both in Pharo and Squeak Trunk-9560) your instructions
|
| > precisely for installing Seaside 3.0. No errors at all, great!  
| > (Loading the ConfigurationOfSeaside took a lot longer, however).
| >
| > I then evaluated in a Workspace the following expression:
| >
| > PRDistribution new register.
| >
| > And pointed my Browser to http://localhost:8080/pier
| > I then get the "Welcome to Pier" frontpage but without the nice  
| > layout, like the CSS is missing.
| > My Safari browser reports (in the activity window) for one of the  
| > files generated by Pier: internal server error
| > If I try to load only this file I get a html page :  
| > "MessageNotUnderstood: ByteArray>>isByteString"
| >
| > Can anyone help me out how/where to fix this?
| > The error is exactly the same in Pharo and Squeak Trunk, so I guess
|
| > it must be somewhere in Pier 3.0?
| >
| > Much appreciated,
| >
| > Merik
| >
| > On Mar 2, 2010, at 2:12 AM, Dale Henrichs wrote:
| >
| >> ConfigurationOfSeaside is Metacello configuration that provides  
| >> easy access to Seaside2.8 or Seaside3.0, Magritte and Pier for  
| >> Squeak and Pharo (soon GemStone, too).
| >>
| >> To download ConfigurationOfSeaside evaluate the follow expression
|
| >> in Pharo:
| >>
| >> (Smalltalk at: #Gofer) new
| >> squeaksource: 'MetacelloRepository';
| >> package: 'ConfigurationOfSeaside';
| >> load.
| >>
| >> or the following expressio in Squeak:
| >>
| >> (Installer squeaksource
| >> project: 'MetacelloRepository';
| >> packagesMatching: 'ConfigurationOfSeaside-*') first install.
| >>
| >> After downloading ConfigurationOfSeaside evaluate one of the  
| >> following expressions:
| >>
| >> ConfigurationOfSeaside project latestVersion
| >> load: #('Seaside 2.8' 'Seaside 2.8 Examples' 'Magritte Tests' 'Pier
|  
| >> Tests'
| >>      'Pier AddOns').
| >>
| >> or
| >>
| >> ConfigurationOfSeaside project latestVersion
| >> load: #('Seaside 3.0' 'Seaside 3.0 Tests' 'Magritte2 Tests' 'Pier2
|
| >> Tests'
| >>      'Pier2 AddOns').
| >>
| >> depending upon whether you want to work with Seaside3.0 or  
| >> Seaside2.8. Both Seaside 3.0 and Seaside 2.8 cannot coexist in the
|
| >> same image, so you have to make a choice.
| >>
| >> You can edit the literal array to include only the components that
|
| >> you want loaded into your image.
| >>
| >> If you want the latest bleeding edge mcz files for Seaside3.0,  
| >> Magritte, and Pier evaluate the following expression:
| >>
| >> (Smalltalk at: #Gofer) new
| >> squeaksource: 'MetacelloRepository';
| >> package: 'ConfigurationOfPier';
| >> load.
| >> ((Smalltalk at: #ConfigurationOfPier) project
| >> version: '2.0.3-baseline') load: 'ALL'.
| >>
| >> Version 1.0.3 is based upon the latest mcz files in the collective
|
| >> Seaside repositories as of this afternoon PST.
| >>
| >> I've tested ConfigurationOfSeaside on Squeak (trunk and  
| >> Squeak3.10.2-7179-basic) and Pharo (PharoCore-1.0-10508rc2). Note
|
| >> that there was an issue with loading Psome Pier2 code into  
| >> Squeak3.10.2-7179-basic. The same code loaded fine into the Squeak
|
| >> trunk.
| >>
| >> If you want finer control over what is loaded into your image, you
|
| >> can pick and choose from the following Metacello configurations in
| http://www.squeaksource.com/MetacelloRepository 
| >> :
| >>
| >> "Seaside 2.8"
| >> ConfigurationOfSeaside28
| >> ConfigurationOfSeaside28Examples
| >> ConfigurationOfMagritte
| >> ConfigurationOfPier
| >> ConfigurationOfPierAddOns
| >>
| >> "Seaside 3.0"
| >> ConfigurationOfSeaside30
| >> ConfigurationOfMagritte2
| >> ConfigurationOfPier2
| >> ConfigurationOfPierAddOns2
| >>
| >> As you can imagine, it is easier to use ConfigurationOfSeaside to
|
| >> get started.
| >>
| >> Dale
| >> _______________________________________________
| >> Magritte, Pier and Related Tools ...
| >> https://www.iam.unibe.ch/mailman/listinfo/smallwiki
| >
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki