Dependencies with MalTarjanNode, MalGraphNode and friends
Locked
Dependencies with MalTarjanNode, MalGraphNode and friends
 
|
Hi!
I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load You end up with an error: -=-=-=-=-=-=-=-=-=-=-=-= Warning: This package depends on the following classes: MalTarjanNode MalGraphNode MOCycleTable MalCyclesCoverage You must resolve these dependencies before you will be able to load these definitions: DSMCycleTable DSMCycleTable>>cellShape DSMCycleTable>>cellShapeFor:borderColor:view:at: DSMCycleTable>>dsm DSMCycleTable>>dsm: DSMCycleTable>>edgeCellShapeBorder:fill: DSMCycleTable>>edgeCellShapeColor: DSMCycleTable>>renderOn: DSMCyclesCoverage DSMCyclesCoverage>>nodeClass DSMCyclesCoverage>>run DSMCyclesCoverage>>sort DSMTarjanNode DSMTarjanNode>>initialize DSMTarjanNode>>previousNodes DSMTarjanNode>>previousNodesInCycles DSMTarjanNode>>to: FAMIXGraphNode FAMIXGraphNode>>from: FAMIXGraphNode>>initialize FAMIXGraphNode>>isLeaf FAMIXGraphNode>>isRoot FAMIXGraphNode>>nextNodes FAMIXGraphNode>>nextNodes: FAMIXGraphNode>>previousNodes FAMIXGraphNode>>previousNodes: -=-=-=-=-=-=-=-=-=-=-=-= I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. We are almost done. Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Dependencies with MalTarjanNode, MalGraphNode and friends
|
|
It is Moose-Dsm from http://www.squeaksource.com/dsm.
Doru On 3 Dec 2010, at 20:01, Alexandre Bergel wrote: > Hi! > > I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: > ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load > > You end up with an error: > -=-=-=-=-=-=-=-=-=-=-=-= > Warning: This package depends on the following classes: > MalTarjanNode > MalGraphNode > MOCycleTable > MalCyclesCoverage > You must resolve these dependencies before you will be able to load these definitions: > DSMCycleTable > DSMCycleTable>>cellShape > DSMCycleTable>>cellShapeFor:borderColor:view:at: > DSMCycleTable>>dsm > DSMCycleTable>>dsm: > DSMCycleTable>>edgeCellShapeBorder:fill: > DSMCycleTable>>edgeCellShapeColor: > DSMCycleTable>>renderOn: > DSMCyclesCoverage > DSMCyclesCoverage>>nodeClass > DSMCyclesCoverage>>run > DSMCyclesCoverage>>sort > DSMTarjanNode > DSMTarjanNode>>initialize > DSMTarjanNode>>previousNodes > DSMTarjanNode>>previousNodesInCycles > DSMTarjanNode>>to: > FAMIXGraphNode > FAMIXGraphNode>>from: > FAMIXGraphNode>>initialize > FAMIXGraphNode>>isLeaf > FAMIXGraphNode>>isRoot > FAMIXGraphNode>>nextNodes > FAMIXGraphNode>>nextNodes: > FAMIXGraphNode>>previousNodes > FAMIXGraphNode>>previousNodes: > -=-=-=-=-=-=-=-=-=-=-=-= > > I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. > What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. > We are almost done. > > Cheers, > Alexandre > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- www.tudorgirba.com "Every now and then stop and ask yourself if the war you're fighting is the right one." _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Dependencies with MalTarjanNode, MalGraphNode and friends
|
|
It still does not work. I've got a similar error than the one described below.
The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos). But I have ConfigurationOfDSM>>baseline21: spec <version: '2.1-baseline'> ... spec package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; ... spec project: 'MooseAlgos for DSM' with: [ spec className: 'ConfigurationOfMooseAlgos'; file: 'ConfigurationOfMooseAlgos'; version: 'default'; repository: 'http://www.squeaksource.com/MooseAlgos' ]. ... It still does not work, and I have no clue why... Cheers, Alexandre On 3 Dec 2010, at 19:07, Tudor Girba wrote: > It is Moose-Dsm from http://www.squeaksource.com/dsm. > > Doru > > > On 3 Dec 2010, at 20:01, Alexandre Bergel wrote: > >> Hi! >> >> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: >> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load >> >> You end up with an error: >> -=-=-=-=-=-=-=-=-=-=-=-= >> Warning: This package depends on the following classes: >> MalTarjanNode >> MalGraphNode >> MOCycleTable >> MalCyclesCoverage >> You must resolve these dependencies before you will be able to load these definitions: >> DSMCycleTable >> DSMCycleTable>>cellShape >> DSMCycleTable>>cellShapeFor:borderColor:view:at: >> DSMCycleTable>>dsm >> DSMCycleTable>>dsm: >> DSMCycleTable>>edgeCellShapeBorder:fill: >> DSMCycleTable>>edgeCellShapeColor: >> DSMCycleTable>>renderOn: >> DSMCyclesCoverage >> DSMCyclesCoverage>>nodeClass >> DSMCyclesCoverage>>run >> DSMCyclesCoverage>>sort >> DSMTarjanNode >> DSMTarjanNode>>initialize >> DSMTarjanNode>>previousNodes >> DSMTarjanNode>>previousNodesInCycles >> DSMTarjanNode>>to: >> FAMIXGraphNode >> FAMIXGraphNode>>from: >> FAMIXGraphNode>>initialize >> FAMIXGraphNode>>isLeaf >> FAMIXGraphNode>>isRoot >> FAMIXGraphNode>>nextNodes >> FAMIXGraphNode>>nextNodes: >> FAMIXGraphNode>>previousNodes >> FAMIXGraphNode>>previousNodes: >> -=-=-=-=-=-=-=-=-=-=-=-= >> >> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. >> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. >> We are almost done. >> >> Cheers, >> Alexandre >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- > www.tudorgirba.com > > "Every now and then stop and ask yourself if the war you're fighting is the right one." > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Dependencies with MalTarjanNode, MalGraphNode and friends
|
|
Alexandre,
Is this happening when you try to load Moose 4.2 from the latest configuration version in the Moose repository ... let me know the starting point and I'll take a look at it ... Dale On 12/03/2010 02:41 PM, Alexandre Bergel wrote: > It still does not work. I've got a similar error than the one described below. > The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos). > But I have > > ConfigurationOfDSM>>baseline21: spec > <version: '2.1-baseline'> > ... > spec > package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; > package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; > ... > spec > project: 'MooseAlgos for DSM' with: [ > spec > className: 'ConfigurationOfMooseAlgos'; > file: 'ConfigurationOfMooseAlgos'; > version: 'default'; > repository: 'http://www.squeaksource.com/MooseAlgos' ]. > ... > > It still does not work, and I have no clue why... > > Cheers, > Alexandre > > > > On 3 Dec 2010, at 19:07, Tudor Girba wrote: > >> It is Moose-Dsm from http://www.squeaksource.com/dsm. >> >> Doru >> >> >> On 3 Dec 2010, at 20:01, Alexandre Bergel wrote: >> >>> Hi! >>> >>> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: >>> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load >>> >>> You end up with an error: >>> -=-=-=-=-=-=-=-=-=-=-=-= >>> Warning: This package depends on the following classes: >>> MalTarjanNode >>> MalGraphNode >>> MOCycleTable >>> MalCyclesCoverage >>> You must resolve these dependencies before you will be able to load these definitions: >>> DSMCycleTable >>> DSMCycleTable>>cellShape >>> DSMCycleTable>>cellShapeFor:borderColor:view:at: >>> DSMCycleTable>>dsm >>> DSMCycleTable>>dsm: >>> DSMCycleTable>>edgeCellShapeBorder:fill: >>> DSMCycleTable>>edgeCellShapeColor: >>> DSMCycleTable>>renderOn: >>> DSMCyclesCoverage >>> DSMCyclesCoverage>>nodeClass >>> DSMCyclesCoverage>>run >>> DSMCyclesCoverage>>sort >>> DSMTarjanNode >>> DSMTarjanNode>>initialize >>> DSMTarjanNode>>previousNodes >>> DSMTarjanNode>>previousNodesInCycles >>> DSMTarjanNode>>to: >>> FAMIXGraphNode >>> FAMIXGraphNode>>from: >>> FAMIXGraphNode>>initialize >>> FAMIXGraphNode>>isLeaf >>> FAMIXGraphNode>>isRoot >>> FAMIXGraphNode>>nextNodes >>> FAMIXGraphNode>>nextNodes: >>> FAMIXGraphNode>>previousNodes >>> FAMIXGraphNode>>previousNodes: >>> -=-=-=-=-=-=-=-=-=-=-=-= >>> >>> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. >>> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. >>> We are almost done. >>> >>> Cheers, >>> Alexandre >>> -- >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>> Alexandre Bergel http://www.bergel.eu >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> >> -- >> www.tudorgirba.com >> >> "Every now and then stop and ask yourself if the war you're fighting is the right one." >> >> >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Dependencies with MalTarjanNode, MalGraphNode and friends
|
|
Hi Dale,
Apparently Doru fixed the problem we have had for a couple of weeks already. I missed some packages apparently... Cheers, Alexandre On 3 Dec 2010, at 20:59, Dale Henrichs wrote: > Alexandre, > > Is this happening when you try to load Moose 4.2 from the latest configuration version in the Moose repository ... let me know the starting point and I'll take a look at it ... > > Dale > > On 12/03/2010 02:41 PM, Alexandre Bergel wrote: >> It still does not work. I've got a similar error than the one described below. >> The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos). >> But I have >> >> ConfigurationOfDSM>>baseline21: spec >> <version: '2.1-baseline'> >> ... >> spec >> package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; >> package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; >> ... >> spec >> project: 'MooseAlgos for DSM' with: [ >> spec >> className: 'ConfigurationOfMooseAlgos'; >> file: 'ConfigurationOfMooseAlgos'; >> version: 'default'; >> repository: 'http://www.squeaksource.com/MooseAlgos' ]. >> ... >> >> It still does not work, and I have no clue why... >> >> Cheers, >> Alexandre >> >> >> >> On 3 Dec 2010, at 19:07, Tudor Girba wrote: >> >>> It is Moose-Dsm from http://www.squeaksource.com/dsm. >>> >>> Doru >>> >>> >>> On 3 Dec 2010, at 20:01, Alexandre Bergel wrote: >>> >>>> Hi! >>>> >>>> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: >>>> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load >>>> >>>> You end up with an error: >>>> -=-=-=-=-=-=-=-=-=-=-=-= >>>> Warning: This package depends on the following classes: >>>> MalTarjanNode >>>> MalGraphNode >>>> MOCycleTable >>>> MalCyclesCoverage >>>> You must resolve these dependencies before you will be able to load these definitions: >>>> DSMCycleTable >>>> DSMCycleTable>>cellShape >>>> DSMCycleTable>>cellShapeFor:borderColor:view:at: >>>> DSMCycleTable>>dsm >>>> DSMCycleTable>>dsm: >>>> DSMCycleTable>>edgeCellShapeBorder:fill: >>>> DSMCycleTable>>edgeCellShapeColor: >>>> DSMCycleTable>>renderOn: >>>> DSMCyclesCoverage >>>> DSMCyclesCoverage>>nodeClass >>>> DSMCyclesCoverage>>run >>>> DSMCyclesCoverage>>sort >>>> DSMTarjanNode >>>> DSMTarjanNode>>initialize >>>> DSMTarjanNode>>previousNodes >>>> DSMTarjanNode>>previousNodesInCycles >>>> DSMTarjanNode>>to: >>>> FAMIXGraphNode >>>> FAMIXGraphNode>>from: >>>> FAMIXGraphNode>>initialize >>>> FAMIXGraphNode>>isLeaf >>>> FAMIXGraphNode>>isRoot >>>> FAMIXGraphNode>>nextNodes >>>> FAMIXGraphNode>>nextNodes: >>>> FAMIXGraphNode>>previousNodes >>>> FAMIXGraphNode>>previousNodes: >>>> -=-=-=-=-=-=-=-=-=-=-=-= >>>> >>>> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. >>>> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. >>>> We are almost done. >>>> >>>> Cheers, >>>> Alexandre >>>> -- >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>> Alexandre Bergel http://www.bergel.eu >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> -- >>> www.tudorgirba.com >>> >>> "Every now and then stop and ask yourself if the war you're fighting is the right one." >>> >>> >>> >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> > -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Dependencies with MalTarjanNode, MalGraphNode and friends
|
|
Hi Alexandre,
I was able to track down the source of the issues.. To start with the dependency warning message from the Monticello multi package loader isn't very helpful, since you have no clue as to the mcz file that contains the bogus definitions. By putting a self halt in MCpackageLoader>>analyze I was able to figure out that the requirements for the missing classes were coming from a variety of sources, apparently sprinkled throughout the Moose code base: #( #RBVariableNode #('extension method for RBVariableNode class') #RBBlockLintRule #('FameNameConventionBetweenFM3AndSmalltalkRule, FameOppositeAttributeShouldPointBackRule, FAMIXMetaModelClassesNotDeclaredInFameRule, FAMIXMetaModelClassesShouldNotOverrideRule, FAMIXMetaModelClassesShouldOverrideRule, FameSuperclassMetaDescribedExistRule all attempting to subclass RBBlockLintFule') #MalGraphNode #('FAMIXGraphNode attempt to subclass MalGraphNode') #RBProgramNodeVisitor #('SmalltalkMethodVisitor, VisualWorksParseTreeVisitor subclassing RBProgramNodeVisitor') #RBProgramNode #('extension method for RBProgramNode') ) Since I knew that the RB classes were coming from the RefactoringBrowser, I took a look at the loadDirective for the two load expressions (using fetch instead of load, you can look at the load order packages without actually doing any loads): (ConfigurationOfMoose project version: '4.2') fetch loadDirective. (ConfigurationOfMoose project version: '4.2-baseline') fetch loadDirective. I scanned the two load directive trees looking for a RefactoringBrowser load in the '4.2-baseline' fetch ... I traced the RefactoringBrowser refs to version 1.0-baseline PetitParser which loaded Glamour2.0-beta.8 which loaded Grease1.3 which ends up loading the RefactoringBrowser classes. Tracing the '4.2' fetch down to the PetitParser config, I found that version 1.0 of the PetitParser was being loaded which loaded of Glamour2.0.6 (instead of Glamour2.0-beta.8) and Glamour2.0.6 does not reference Grease at all... Presumably if you change the spec for Glamour in ConfigurationOfPetitParser version 1.0 from: spec project: 'Glamour for Petit' with: '2.0.6'. to spec project: 'Glamour for Petit' with: '2.0-beta.8'. You'll get the RefactoringBrowser classes loaded, however.... I think it would be prudent, to put explicit dependencies upon the RefactoringBrowser config closer to requirements (whichever package the FAMIX and Fame classes reside in....that looks like the ConfigurationOfMoose) rather than depend upon the resolution of the required classes via the Glamour config (which is loading Grease i support of Magritte)... If you do that, then you won't need to monkey with ConfigurationOfPetitParser... So the correct resolution is to make the packages with the offending classes and extension methods (noted above) be made dependent upon ConfigurationOfRefactoringBrowser directly from the ConfigurationOfMoose. Dale On Dec 6, 2010, at 6:40 AM, Alexandre Bergel wrote: > Hi Dale, > > Apparently Doru fixed the problem we have had for a couple of weeks already. > I missed some packages apparently... > > Cheers, > Alexandre > > > On 3 Dec 2010, at 20:59, Dale Henrichs wrote: > >> Alexandre, >> >> Is this happening when you try to load Moose 4.2 from the latest configuration version in the Moose repository ... let me know the starting point and I'll take a look at it ... >> >> Dale >> >> On 12/03/2010 02:41 PM, Alexandre Bergel wrote: >>> It still does not work. I've got a similar error than the one described below. >>> The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos). >>> But I have >>> >>> ConfigurationOfDSM>>baseline21: spec >>> <version: '2.1-baseline'> >>> ... >>> spec >>> package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; >>> package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; >>> ... >>> spec >>> project: 'MooseAlgos for DSM' with: [ >>> spec >>> className: 'ConfigurationOfMooseAlgos'; >>> file: 'ConfigurationOfMooseAlgos'; >>> version: 'default'; >>> repository: 'http://www.squeaksource.com/MooseAlgos' ]. >>> ... >>> >>> It still does not work, and I have no clue why... >>> >>> Cheers, >>> Alexandre >>> >>> >>> >>> On 3 Dec 2010, at 19:07, Tudor Girba wrote: >>> >>>> It is Moose-Dsm from http://www.squeaksource.com/dsm. >>>> >>>> Doru >>>> >>>> >>>> On 3 Dec 2010, at 20:01, Alexandre Bergel wrote: >>>> >>>>> Hi! >>>>> >>>>> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: >>>>> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load >>>>> >>>>> You end up with an error: >>>>> -=-=-=-=-=-=-=-=-=-=-=-= >>>>> Warning: This package depends on the following classes: >>>>> MalTarjanNode >>>>> MalGraphNode >>>>> MOCycleTable >>>>> MalCyclesCoverage >>>>> You must resolve these dependencies before you will be able to load these definitions: >>>>> DSMCycleTable >>>>> DSMCycleTable>>cellShape >>>>> DSMCycleTable>>cellShapeFor:borderColor:view:at: >>>>> DSMCycleTable>>dsm >>>>> DSMCycleTable>>dsm: >>>>> DSMCycleTable>>edgeCellShapeBorder:fill: >>>>> DSMCycleTable>>edgeCellShapeColor: >>>>> DSMCycleTable>>renderOn: >>>>> DSMCyclesCoverage >>>>> DSMCyclesCoverage>>nodeClass >>>>> DSMCyclesCoverage>>run >>>>> DSMCyclesCoverage>>sort >>>>> DSMTarjanNode >>>>> DSMTarjanNode>>initialize >>>>> DSMTarjanNode>>previousNodes >>>>> DSMTarjanNode>>previousNodesInCycles >>>>> DSMTarjanNode>>to: >>>>> FAMIXGraphNode >>>>> FAMIXGraphNode>>from: >>>>> FAMIXGraphNode>>initialize >>>>> FAMIXGraphNode>>isLeaf >>>>> FAMIXGraphNode>>isRoot >>>>> FAMIXGraphNode>>nextNodes >>>>> FAMIXGraphNode>>nextNodes: >>>>> FAMIXGraphNode>>previousNodes >>>>> FAMIXGraphNode>>previousNodes: >>>>> -=-=-=-=-=-=-=-=-=-=-=-= >>>>> >>>>> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. >>>>> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. >>>>> We are almost done. >>>>> >>>>> Cheers, >>>>> Alexandre >>>>> -- >>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>>> Alexandre Bergel http://www.bergel.eu >>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Moose-dev mailing list >>>>> [hidden email] >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>>> -- >>>> www.tudorgirba.com >>>> >>>> "Every now and then stop and ask yourself if the war you're fighting is the right one." >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >> > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Dependencies with MalTarjanNode, MalGraphNode and friends
|
|
> Tracing the '4.2' fetch down to the PetitParser config, I found that version 1.0 of the PetitParser was being loaded which loaded of Glamour2.0.6 (instead of Glamour2.0-beta.8) and Glamour2.0.6 does not reference Grease at all... Presumably if you change the spec for Glamour in ConfigurationOfPetitParser version 1.0 from:
> spec project: 'Glamour for Petit' with: '2.0.6'. > to > spec project: 'Glamour for Petit' with: '2.0-beta.8'. I fixed this, but I still have the missing dependency. > You'll get the RefactoringBrowser classes loaded, however.... > > I think it would be prudent, to put explicit dependencies upon the RefactoringBrowser config closer to requirements (whichever package the FAMIX and Fame classes reside in....that looks like the ConfigurationOfMoose) rather than depend upon the resolution of the required classes via the Glamour config (which is loading Grease i support of Magritte)... If you do that, then you won't need to monkey with ConfigurationOfPetitParser... > > So the correct resolution is to make the packages with the offending classes and extension methods (noted above) be made dependent upon ConfigurationOfRefactoringBrowser directly from the ConfigurationOfMoose. Maybe. But the problem I get seems to be related to "MalGraphNode" that is loaded after "FAMIXGraphNode". The 4.2-baseline loads fine, but the version 4.2 that I generated using toolbox has the dependency problem. Alexandre > > > On Dec 6, 2010, at 6:40 AM, Alexandre Bergel wrote: > >> Hi Dale, >> >> Apparently Doru fixed the problem we have had for a couple of weeks already. >> I missed some packages apparently... >> >> Cheers, >> Alexandre >> >> >> On 3 Dec 2010, at 20:59, Dale Henrichs wrote: >> >>> Alexandre, >>> >>> Is this happening when you try to load Moose 4.2 from the latest configuration version in the Moose repository ... let me know the starting point and I'll take a look at it ... >>> >>> Dale >>> >>> On 12/03/2010 02:41 PM, Alexandre Bergel wrote: >>>> It still does not work. I've got a similar error than the one described below. >>>> The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos). >>>> But I have >>>> >>>> ConfigurationOfDSM>>baseline21: spec >>>> <version: '2.1-baseline'> >>>> ... >>>> spec >>>> package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; >>>> package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM' 'MooseAlgos for DSM')]; >>>> ... >>>> spec >>>> project: 'MooseAlgos for DSM' with: [ >>>> spec >>>> className: 'ConfigurationOfMooseAlgos'; >>>> file: 'ConfigurationOfMooseAlgos'; >>>> version: 'default'; >>>> repository: 'http://www.squeaksource.com/MooseAlgos' ]. >>>> ... >>>> >>>> It still does not work, and I have no clue why... >>>> >>>> Cheers, >>>> Alexandre >>>> >>>> >>>> >>>> On 3 Dec 2010, at 19:07, Tudor Girba wrote: >>>> >>>>> It is Moose-Dsm from http://www.squeaksource.com/dsm. >>>>> >>>>> Doru >>>>> >>>>> >>>>> On 3 Dec 2010, at 20:01, Alexandre Bergel wrote: >>>>> >>>>>> Hi! >>>>>> >>>>>> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute: >>>>>> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load >>>>>> >>>>>> You end up with an error: >>>>>> -=-=-=-=-=-=-=-=-=-=-=-= >>>>>> Warning: This package depends on the following classes: >>>>>> MalTarjanNode >>>>>> MalGraphNode >>>>>> MOCycleTable >>>>>> MalCyclesCoverage >>>>>> You must resolve these dependencies before you will be able to load these definitions: >>>>>> DSMCycleTable >>>>>> DSMCycleTable>>cellShape >>>>>> DSMCycleTable>>cellShapeFor:borderColor:view:at: >>>>>> DSMCycleTable>>dsm >>>>>> DSMCycleTable>>dsm: >>>>>> DSMCycleTable>>edgeCellShapeBorder:fill: >>>>>> DSMCycleTable>>edgeCellShapeColor: >>>>>> DSMCycleTable>>renderOn: >>>>>> DSMCyclesCoverage >>>>>> DSMCyclesCoverage>>nodeClass >>>>>> DSMCyclesCoverage>>run >>>>>> DSMCyclesCoverage>>sort >>>>>> DSMTarjanNode >>>>>> DSMTarjanNode>>initialize >>>>>> DSMTarjanNode>>previousNodes >>>>>> DSMTarjanNode>>previousNodesInCycles >>>>>> DSMTarjanNode>>to: >>>>>> FAMIXGraphNode >>>>>> FAMIXGraphNode>>from: >>>>>> FAMIXGraphNode>>initialize >>>>>> FAMIXGraphNode>>isLeaf >>>>>> FAMIXGraphNode>>isRoot >>>>>> FAMIXGraphNode>>nextNodes >>>>>> FAMIXGraphNode>>nextNodes: >>>>>> FAMIXGraphNode>>previousNodes >>>>>> FAMIXGraphNode>>previousNodes: >>>>>> -=-=-=-=-=-=-=-=-=-=-=-= >>>>>> >>>>>> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose') ]; a bit everywhere. >>>>>> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked into Moose-DistributionMap but apparently they are defined somewhere else. >>>>>> We are almost done. >>>>>> >>>>>> Cheers, >>>>>> Alexandre >>>>>> -- >>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>>>> Alexandre Bergel http://www.bergel.eu >>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Moose-dev mailing list >>>>>> [hidden email] >>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>>> >>>>> -- >>>>> www.tudorgirba.com >>>>> >>>>> "Every now and then stop and ask yourself if the war you're fighting is the right one." >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Moose-dev mailing list >>>>> [hidden email] >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>> >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
«
Return to Moose
|
1 view|%1 views
| Free forum by Nabble | Edit this page |