Smalltalk › Gemtalk › GLASS

Fwd: Re: Deployment setup

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

2 messages Options

GLASS mailing list

Fwd: Re: Deployment setup

-------- Forwarded Message --------

Subject:	Re: [Glass] Deployment setup
Date:	Tue, 6 Jun 2017 10:13:21 +0200
From:	Trussardi Dario Romano [hidden email]
To:	Dale Henrichs [hidden email]

Ciao Dale,

On 06/05/2017 02:14 AM, Trussardi Dario Romano via Glass wrote:

Ciao,

i have development seaside application based on:

Pharo 4.0

Seaside3 3.1.4.2

Magritte3 3.5.0

SIXX 0.4.1 ( to save data and restore it into Gemstone )

Now i need to setup a deployment system based on Gemstone/S.

I'm a bit confused:

What version of Gemstone/S to use ? 3.1.0.6 - 3.2.x - 3.3.x

All things being equal, I would recommend that you use the latest version of GemStone avaialable, so today that would be 3.3.5.

OK yesterday is release the 3.3.6

In the past i used GemTools to manage a 3.1.0.6 repository.

I have a Ubuntu 16.04 LTS system with load one hold ???? GsDevKit_home

I have do the command : seasideCreateStone seaside_3106 3.1.0.6

Could you tell me some more about where this seasideCreateStone command came from ... I assume that this command is coming from the GsDevKit_seaside31 project[1].

Since you are not really sure about what you are doing, I would like you to follow the instructions here[2] for installing Seaside. These instructions expect you to have created a stone and then load Seaside into that stone. So before following the directions create a seaside stone:

createStone seaside_335 3.3.5

I create the seaside_336 3..3.6

Since you are not really sure about what you are doing, I would like you to provide with a little bit more information about the state of your GsDevKit_home checkout .... I would like to see the output of the following bash commands:

cd $GS_HOME
git log -1

report:

/opt/GsDKb/GsDevKit_home$ git log -1

commit fb20421fe7d606da18abb337ff1f47824da157ce

Author: Dale Henrichs <[hidden email]>

Date: Thu Apr 6 14:36:52 2017 -0700

remove installDebianPackages completely

git remove -v

report : remove is not a git command

I do the: git remote -v

it report :

origin https://github.com/GsDevKit/GsDevKit_home.git (fetch)

origin https://github.com/GsDevKit/GsDevKit_home.git (push)

Thanks,

Dario

Don't try to do anything else until you provide me with this information, I see that you are having trouble loading Grease and Sixx so I want to be able to set up a test system locally so that I can reproduce your issues and then give you step by step instructions for getting things installed ...

Dale

[1] https://github.com/GsDevKit/GsDevKit_seaside31
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/docs/gettingStartedWithSeaside.md

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

GLASS mailing list

Re: Deployment setup

Ciao,

A) in the seaside_3212 repository relative to the BaselineOfSIXX load

1) the tode input : ( BaselineOfSIXX project lastVersion ) load

answer:

Could not resolve: XML-Observable [XML-Observable-JohanBrichau.1] in cache http://smalltalkhub.com/mc/PharoExtras/XMLSupport/main (4)

2) The relative (<a href="github://glassdb/SIXX:master/repository">github://glassdb/SIXX:master/repository ) menu load entry

in the project list works fine.

B1) i use the lighttpd web server and i configured the FastCGI entry.

Now the seaside_3212 define the gemServer based on zinc on port 8080.

But the lighttpd don't answer to it.

What i need to add in the lighttpd config to manage it?

B2 ) in alternative to B1

I have do test to create the FastCGI with the seasideWebServer but it answer: ' No serverClass defined for service 'fastcgi'

In Tode i do the command :

project load --loads='FastCGI' Seaside3

but the system answer : Name not found

What i wrong ?

C) i have a new GsDevKit_home with a a new 3.3.6 repository

i think to load seaside following: https://github.com/GsDevKit/GsDevKit_home/blob/master/docs/gettingStartedWithSeaside.md

it's right ?

D) i have a o macbook with a Tode client based on gsDevKitHome

i had a session to link the seaside_3212 ( Based on GsDevKit_home ) run on the server ( the same og point A )

(TDSessionDescription new
name: 'meeting001';
gemstoneVersion: '3.2.12';
stoneHost: 'meeting001';
stoneName: 'seaside_3212';
gemHost: 'meeting001';
netLDI: 'seaside_3212_ldi';
gemTask: 'gemnetobject';
userId: 'DataCurator';
password: 'swordfish';
backupDirectory: '';
serverGitRoot: '/opt/oodb';
serverTodeRoot: '/opt/oodb/gsDevKitHome/dev/tode';
yourself) exportTo: TDShell sessionDescriptionHome.

When i do the Tode test login the system answer:

Error running testLogin:
The gci library 'libgcirpc-3.2.12-32' for GemStone version '3.2.12'
was not found in the expected location '/opt/git/gsDevKitHome/pharo/pharo-vm/'.
Please double check that the GemStone version is correct.
It may be necessary to download a copy of 'libgcirpc-3.2.12-32' for
Macintosh from http://ftp.gemtalksystems.com/pub/GemStone64/3.2.12.

I download the GemStone64Bit3.2.12-i386.Darwin

and copy the libgcirpc-3.2.12-32.dylib into /opt/git/gsDevKitHome/pharo/pharo-vm/'.

But the Tode test login answer the same error ...

??????

Thanks for considerations,

Dario

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass