Smalltalk › Gemtalk › GLASS

GemTools on Ubuntu system

‹ Previous Topic Next Topic ›
 
classic Classic list List threaded Threaded
♦
♦
 9 messages Options
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

GemTools on Ubuntu system

GLASS mailing list
Ciao,
       
        i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base

        I manage the GLASS with:

                GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]

                running on MacBook  system and all works fine.

        Now i need to setup and running the GemTools    on  the Ubuntu system.

        It is praticable ?

        Some indications to do it ?

        Thanks,

                Dario
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list
Dario,

You should be able to copy the GemTools*.app directory over to your
Ubunutu system and start the image ... you'll need to have 32 bit X
libraries installed ... if you are using GsDevKit_home, the support for
Pharo will be installed. If not then here are the instructions you
should follow([1], [2], and [3]).

The only other thing you need to do is to copy the $GEMSTONE/lib32/*.so
libraries to the GemTools*.app/Contents/Linux686 directory and create a
symbolic link between gciForLinux.so and the libgcirpc-*-32.so file....
and you should be good to go.

Dale

[1]
https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2]
https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3]
https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78

On 4/5/19 2:35 AM, Trussardi Dario Romano via Glass wrote:

> Ciao,
>
> i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base
>
> I manage the GLASS with:
>
> GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]
>
> running on MacBook  system and all works fine.
>
> Now i need to setup and running the GemTools    on  the Ubuntu system.
>
> It is praticable ?
>
> Some indications to do it ?
>
> Thanks,
>
> Dario
> _______________________________________________
> Glass mailing list
> [hidden email]
> http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list
Ciao,

thanks.

You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 

I copy the GemTools*.app  directory from the MacBook system to the Ubuntu 18.04.1 system.

In the Ubuntu system i using the GsDevKit_home and the startClient todebase     works fine.

I change the file execution permits to:
/opt/GemTools-1.0-beta.8.7-3101.app$ ./GemTools-1.0-beta.8.7-31x.sh 
/opt/GemTools-1.0-beta.8.7-3101.app/Contents/Linux686/squeak


Now when i run the: ./
GemTools-1.0-beta.8.7-31x.sh 

after  select the: ****.image  file

the system report:
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
could not find module vm-display-X11
Annullato (core dump creato)

It's strange?
I must continue in any case with:

If not then here are the instructions you should follow([1], [2], and [3]).

Thanks,

Dario

The only other thing you need to do is to copy the $GEMSTONE/lib32/*.so libraries to the GemTools*.app/Contents/Linux686 directory and create a symbolic link between gciForLinux.so and the libgcirpc-*-32.so file.... and you should be good to go.

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78

On 4/5/19 2:35 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base

I manage the GLASS with:

GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]

running on MacBook  system and all works fine.

Now i need to setup and running the  GemTools    on  the Ubuntu system.

It is praticable ?

Some indications to do it ?



_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list

I guess I've just ignored the zenity messages when I've started gemtools, since things work fine ... if I'm not mistaken zenity is supposed to kick in when you don't supply an image...

Dale

On 4/6/19 3:50 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

thanks.

You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 

I copy the GemTools*.app  directory from the MacBook system to the Ubuntu 18.04.1 system.

In the Ubuntu system i using the GsDevKit_home and the startClient todebase     works fine.

I change the file execution permits to:
/opt/GemTools-1.0-beta.8.7-3101.app$ ./GemTools-1.0-beta.8.7-31x.sh 
/opt/GemTools-1.0-beta.8.7-3101.app/Contents/Linux686/squeak
Now when i run the: ./
GemTools-1.0-beta.8.7-31x.sh 

after  select the: ****.image  file

the system report:
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
could not find module vm-display-X11
Annullato (core dump creato)

It's strange?
I must continue in any case with:

If not then here are the instructions you should follow([1], [2], and [3]).

Thanks,

Dario

The only other thing you need to do is to copy the $GEMSTONE/lib32/*.so libraries to the GemTools*.app/Contents/Linux686 directory and create a symbolic link between gciForLinux.so and the libgcirpc-*-32.so file.... and you should be good to go.

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78

On 4/5/19 2:35 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base

I manage the GLASS with:

GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]

running on MacBook  system and all works fine.

Now i need to setup and running the  GemTools    on  the Ubuntu system.

It is praticable ?

Some indications to do it ?



_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list
Ciao,

I guess I've just ignored the zenity messages when I've started gemtools, since things work fine ... if I'm not mistaken zenity is supposed to kick in when you don't supply an image...

Dale

The situation is:

when from the shell i run:   ./ 
GemTools-1.0-beta.8.7-31x.sh 

the shell report immediately:

 
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.

After the system open the file selection window and i can select the ....fileName.image

A this point the shell report :

could not find module vm-display-X11
Annullato (core dump creato)

Considerations?

From the same shell the: startClient todebase   works fine.

Thanks,

Dario

P.S.  In the  GemTools*.app/Contents/Linux686 directory  i have some vm-...  ( vm-display-X11  vm-display-null ........).  subdirectory  

but not vm-dispaly..... executable files

On 4/6/19 3:50 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

thanks.

You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 

I copy the GemTools*.app  directory from the MacBook system to the Ubuntu 18.04.1 system.

In the Ubuntu system i using the GsDevKit_home and the startClient todebase     works fine.

I change the file execution permits to:
/opt/GemTools-1.0-beta.8.7-3101.app$ ./GemTools-1.0-beta.8.7-31x.sh 
/opt/GemTools-1.0-beta.8.7-3101.app/Contents/Linux686/squeak
Now when i run the: ./
GemTools-1.0-beta.8.7-31x.sh 

after  select the: ****.image  file

the system report:
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
could not find module vm-display-X11
Annullato (core dump creato)

I must continue in any case with:

If not then here are the instructions you should follow([1], [2], and [3]).

Thanks,

Dario

The only other thing you need to do is to copy the $GEMSTONE/lib32/*.so libraries to the GemTools*.app/Contents/Linux686 directory and create a symbolic link between gciForLinux.so and the libgcirpc-*-32.so file.... and you should be good to go.

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78

On 4/5/19 2:35 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base

I manage the GLASS with:

GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]

running on MacBook  system and all works fine.

Now i need to setup and running the  GemTools    on  the Ubuntu system.

It is praticable ?

Some indications to do it ?



_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass


_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list

I didn't realize that you couldn't open the GemTools client ... I' ve only run GemTools myself on Ubuntu 16.04 ...

Here's the output of a GemTools on my Ubuntu16.04:

foos:GemTools>ls
gemtools			    GemTools-1.0-beta.8.6-301x.app.zip	 GemTools-1.0-beta.8.7-340xx.app
GemTools-1.0b6.app		    GemTools-1.0-beta.8.7-3101x.app	 GemTools1.0-beta.8.7.zip
GemTools-1.0b6.zip		    GemTools-1.0-beta.8.7-310x.zip	 GemTools-2.3.1-preview.app
GemTools-1.0-beta.8.6-244x.app	    GemTools-1.0-beta.8.7-31x.zip	 gemToolsBuilder
GemTools-1.0-beta.8.6-244x.app.zip  GemTools-1.0-beta.8.7-320xx.app
GemTools-1.0-beta.8.6-301x.app	    GemTools-1.0-beta.8.7-324_linux.zip
foos:GemTools>cd GemTools-1.0-beta.8.7-340xx.app
foos:GemTools-1.0-beta.8.7-340xx.app>ls
Contents  COPYRIGHT  GemTools-1.0-beta.8.7-32x.lnk  GemTools-1.0-beta.8.7-32x.sh  README.txt
foos:GemTools-1.0-beta.8.7-340xx.app>./GemTools-1.0-beta.8.7-32x.sh &
[1] 12955
foos:GemTools-1.0-beta.8.7-340xx.app>+ dirname ./GemTools-1.0-beta.8.7-32x.sh
+ readlink -f .
+ ROOT=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app
+ LINUX=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686
+ RESOURCES=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources
+ gvfs-set-attribute ./GemTools-1.0-beta.8.7-32x.sh metadata::custom-icon file:///export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/Squeak.png
+ ls /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x.image
+ wc -l
+ image_count=1
+ 
+ [ 1 -ne 1 ]
+ image=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ exec /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686/squeak -plugins /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686 -encoding latin1 -vm-display-X11 /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ which zenity
/usr/bin/zenity
Here's the listing of the GemTools startup script:
#!/bin/sh

set -x

# path
ROOT=`readlink -f $(dirname $0)`
LINUX="$ROOT/Contents/Linux686"
RESOURCES="$ROOT/Contents/Resources"

# icon (note: gvfs-set-attribute is found in gvfs-bin on Ubuntu
# systems and it seems to require an absolute filename)
gvfs-set-attribute \
	"$0" \
	"metadata::custom-icon" \
	"file://$RESOURCES/Squeak.png" \
		2> /dev/null

# zenity is part of GNOME
image_count=`ls "$RESOURCES"/*.image 2>/dev/null |wc -l`
if which zenity &>/dev/null && [ "$image_count"  -ne 1 ]; then
	olddir=`pwd`
	cd "$RESOURCES"
	image=`zenity --title 'Select an image' --file-selection --file-filter '*.image' --file-filter '*'`
	cd "$olddir"
else
	image="$RESOURCES/GemTools-1.0-beta.8.7-32x"
fi

# execute
exec "$LINUX/squeak" \
	-plugins "$LINUX" \
	-encoding latin1 \
	-vm-display-X11 \
	"$image"
.. and I'd think that you could just directly set the image file and skip the zenity code altogether and just use the line `image="$RESOURCES...` to set the image ... eliminating the zenity code works for my on Ubuntu 16.04 ...

It seems to be useful if you have multiple images in the resources directory ... I only have one...

Why are you trying to use GemTools when you have a tODE image available? Is tODE not installed in your 3.1.0.6 stone?

Dale

(On 4/8/19 2:28 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

I guess I've just ignored the zenity messages when I've started gemtools, since things work fine ... if I'm not mistaken zenity is supposed to kick in when you don't supply an image...

Dale

The situation is:

when from the shell i run:   ./ 
GemTools-1.0-beta.8.7-31x.sh 

the shell report immediately:

 
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
After the system open the file selection window and i can select the ....fileName.image
A this point the shell report :
could not find module vm-display-X11
Annullato (core dump creato)

Considerations?

From the same shell the: startClient todebase   works fine.

Thanks,

Dario

P.S.  In the  GemTools*.app/Contents/Linux686 directory  i have some vm-...  ( vm-display-X11  vm-display-null ........).  subdirectory  

but not vm-dispaly..... executable files

On 4/6/19 3:50 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

thanks.

You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 

I copy the GemTools*.app  directory from the MacBook system to the Ubuntu 18.04.1 system.

In the Ubuntu system i using the GsDevKit_home and the startClient todebase     works fine.

I change the file execution permits to:
/opt/GemTools-1.0-beta.8.7-3101.app$ ./GemTools-1.0-beta.8.7-31x.sh 
/opt/GemTools-1.0-beta.8.7-3101.app/Contents/Linux686/squeak
Now when i run the: ./
GemTools-1.0-beta.8.7-31x.sh 

after  select the: ****.image  file

the system report:
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
could not find module vm-display-X11
Annullato (core dump creato)

I must continue in any case with:

If not then here are the instructions you should follow([1], [2], and [3]).

Thanks,

Dario

The only other thing you need to do is to copy the $GEMSTONE/lib32/*.so libraries to the GemTools*.app/Contents/Linux686 directory and create a symbolic link between gciForLinux.so and the libgcirpc-*-32.so file.... and you should be good to go.

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78

On 4/5/19 2:35 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base

I manage the GLASS with:

GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]

running on MacBook  system and all works fine.

Now i need to setup and running the  GemTools    on  the Ubuntu system.

It is praticable ?

Some indications to do it ?



_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass


_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list
Ciao, thanks.

I didn't realize that you couldn't open the GemTools client ... I' ve only run GemTools myself on Ubuntu 16.04 ...

Here's the output of a GemTools on my Ubuntu16.04:

foos:GemTools>ls
gemtools			    GemTools-1.0-beta.8.6-301x.app.zip	 GemTools-1.0-beta.8.7-340xx.app
GemTools-1.0b6.app		    GemTools-1.0-beta.8.7-3101x.app	 GemTools1.0-beta.8.7.zip
GemTools-1.0b6.zip		    GemTools-1.0-beta.8.7-310x.zip	 GemTools-2.3.1-preview.app
GemTools-1.0-beta.8.6-244x.app	    GemTools-1.0-beta.8.7-31x.zip	 gemToolsBuilder
GemTools-1.0-beta.8.6-244x.app.zip  GemTools-1.0-beta.8.7-320xx.app
GemTools-1.0-beta.8.6-301x.app	    GemTools-1.0-beta.8.7-324_linux.zip
I don't have the GemTools directory.

I have only copy the:
GemTools-1.0-beta.8.7-3101.app    from a MacBook system to Ubuntu 18.04 LTS system


You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 


foos:GemTools>cd GemTools-1.0-beta.8.7-340xx.app
foos:GemTools-1.0-beta.8.7-340xx.app>ls
Contents  COPYRIGHT  GemTools-1.0-beta.8.7-32x.lnk  GemTools-1.0-beta.8.7-32x.sh  README.tx
I don't understand what do you do in the next lines.
foos:GemTools-1.0-beta.8.7-340xx.app>./GemTools-1.0-beta.8.7-32x.sh &
[1] 12955
foos:GemTools-1.0-beta.8.7-340xx.app>+ dirname ./GemTools-1.0-beta.8.7-32x.sh
+ readlink -f .
+ ROOT=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app
+ LINUX=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686
+ RESOURCES=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources
+ gvfs-set-attribute ./GemTools-1.0-beta.8.7-32x.sh metadata::custom-icon file:///export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/Squeak.png
+ ls /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x.image
+ wc -l
+ image_count=1
+ 
+ [ 1 -ne 1 ]
+ image=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ exec /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686/squeak -plugins /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686 -encoding latin1 -vm-display-X11 /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ which zenity
/usr/bin/zenity
Here's the listing of the GemTools startup script:
#!/bin/sh

set -x

# path
ROOT=`readlink -f $(dirname $0)`
LINUX="$ROOT/Contents/Linux686"
RESOURCES="$ROOT/Contents/Resources"

# icon (note: gvfs-set-attribute is found in gvfs-bin on Ubuntu
# systems and it seems to require an absolute filename)
gvfs-set-attribute \
	"$0" \
	"metadata::custom-icon" \
	"file://$RESOURCES/Squeak.png" \
		2> /dev/null

# zenity is part of GNOME
image_count=`ls "$RESOURCES"/*.image 2>/dev/null |wc -l`
if which zenity &>/dev/null && [ "$image_count"  -ne 1 ]; then
	olddir=`pwd`
	cd "$RESOURCES"
	image=`zenity --title 'Select an image' --file-selection --file-filter '*.image' --file-filter '*'`
	cd "$olddir"
else
	image="$RESOURCES/GemTools-1.0-beta.8.7-32x"
fi

# execute
exec "$LINUX/squeak" \
	-plugins "$LINUX" \
	-encoding latin1 \
	-vm-display-X11 \
	"$image"
.. and I'd think that you could just directly set the image file and skip the zenity code altogether and just use the line `image="$RESOURCES...` to set the image ... eliminating the zenity code works for my on Ubuntu 16.04 ...

I eliminating the zenity code and define the $RESOURCES 
but  the ./ 
GemTools-1.0-beta.8.7-31x.sh  report:

 
could not find module vm-display-X11
Annullato (core dump creato)

It seems to be useful if you have multiple images in the resources directory ... I only have one...

Why are you trying to use GemTools when you have a tODE image available? Is tODE not installed in your 3.1.0.6 stone?

Yes i don't have tODE installed i 3.1.0.6   where i run some site baed on Pier web server.

Dario

Dale

(On 4/8/19 2:28 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

I guess I've just ignored the zenity messages when I've started gemtools, since things work fine ... if I'm not mistaken zenity is supposed to kick in when you don't supply an image...

Dale

The situation is:

when from the shell i run:   ./ 
GemTools-1.0-beta.8.7-31x.sh 

the shell report immediately:

 
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
After the system open the file selection window and i can select the ....fileName.image
A this point the shell report :
could not find module vm-display-X11
Annullato (core dump creato)

Considerations?

From the same shell the: startClient todebase   works fine.

Thanks,

Dario

P.S.  In the  GemTools*.app/Contents/Linux686 directory  i have some vm-...  ( vm-display-X11  vm-display-null ........).  subdirectory  

but not vm-dispaly..... executable files

On 4/6/19 3:50 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

thanks.

You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 

I copy the GemTools*.app  directory from the MacBook system to the Ubuntu 18.04.1 system.

In the Ubuntu system i using the GsDevKit_home and the startClient todebase     works fine.

I change the file execution permits to:
/opt/GemTools-1.0-beta.8.7-3101.app$ ./GemTools-1.0-beta.8.7-31x.sh 
/opt/GemTools-1.0-beta.8.7-3101.app/Contents/Linux686/squeak
Now when i run the: ./
GemTools-1.0-beta.8.7-31x.sh 

after  select the: ****.image  file

the system report:
/usr/bin/zenity 
Gtk-Message: 11:49:49.999: GtkDialog mapped without a transient parent. This is discouraged.
could not find module vm-display-X11
Annullato (core dump creato)

I must continue in any case with:

If not then here are the instructions you should follow([1], [2], and [3]).

Thanks,

Dario

The only other thing you need to do is to copy the $GEMSTONE/lib32/*.so libraries to the GemTools*.app/Contents/Linux686 directory and create a symbolic link between gciForLinux.so and the libgcirpc-*-32.so file.... and you should be good to go.

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78

On 4/5/19 2:35 AM, Trussardi Dario Romano via Glass wrote:
Ciao,

i have a Ubuntu system running a hold Gemstone 3.1.0.6 data base

I manage the GLASS with:

GemTools Launcher - >=1.0-beta.8.7.1 [ConfigurationOfGemTools]

running on MacBook  system and all works fine.

Now i need to setup and running the  GemTools    on  the Ubuntu system.

It is praticable ?

Some indications to do it ?



_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass


_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass


_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list


On 4/9/19 4:22 AM, Trussardi Dario Romano via Glass wrote:
Ciao, thanks.

I didn't realize that you couldn't open the GemTools client ... I' ve only run GemTools myself on Ubuntu 16.04 ...

Here's the output of a GemTools on my Ubuntu16.04:

foos:GemTools>ls
gemtools			    GemTools-1.0-beta.8.6-301x.app.zip	 GemTools-1.0-beta.8.7-340xx.app
GemTools-1.0b6.app		    GemTools-1.0-beta.8.7-3101x.app	 GemTools1.0-beta.8.7.zip
GemTools-1.0b6.zip		    GemTools-1.0-beta.8.7-310x.zip	 GemTools-2.3.1-preview.app
GemTools-1.0-beta.8.6-244x.app	    GemTools-1.0-beta.8.7-31x.zip	 gemToolsBuilder
GemTools-1.0-beta.8.6-244x.app.zip  GemTools-1.0-beta.8.7-320xx.app
GemTools-1.0-beta.8.6-301x.app	    GemTools-1.0-beta.8.7-324_linux.zip
I don't have the GemTools directory.

I have only copy the:
GemTools-1.0-beta.8.7-3101.app    from a MacBook system to Ubuntu 18.04 LTS system

That's what I expected you to do ..


You should be able to copy the GemTools*.app directory over to your Ubunutu system and start the image ... you'll need to have 32 bit X libraries installed ... if you are using GsDevKit_home, the support for Pharo will be installed. 


foos:GemTools>cd GemTools-1.0-beta.8.7-340xx.app
foos:GemTools-1.0-beta.8.7-340xx.app>ls
Contents  COPYRIGHT  GemTools-1.0-beta.8.7-32x.lnk  GemTools-1.0-beta.8.7-32x.sh  README.tx
I don't understand what do you do in the next lines.
in your GemTools*.sh script you should see the lines that are listed below (without the leading plusses) ... this is the code where zenity is used and you should be able to remove the conditional block that calls zenity ... if you don't have any code that looks (exactly) like this script code, then send me your GemTools*.sh script that is in the GemTools.app directory.
foos:GemTools-1.0-beta.8.7-340xx.app>./GemTools-1.0-beta.8.7-32x.sh &
[1] 12955
foos:GemTools-1.0-beta.8.7-340xx.app>+ dirname ./GemTools-1.0-beta.8.7-32x.sh
+ readlink -f .
+ ROOT=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app
+ LINUX=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686
+ RESOURCES=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources
+ gvfs-set-attribute ./GemTools-1.0-beta.8.7-32x.sh metadata::custom-icon file:///export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/Squeak.png
+ ls /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x.image
+ wc -l
+ image_count=1
+ 
+ [ 1 -ne 1 ]
+ image=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ exec /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686/squeak -plugins /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686 -encoding latin1 -vm-display-X11 /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ which zenity
/usr/bin/zenity
Here's the listing of the GemTools startup script:
#!/bin/sh

set -x

# path
ROOT=`readlink -f $(dirname $0)`
LINUX="$ROOT/Contents/Linux686"
RESOURCES="$ROOT/Contents/Resources"

# icon (note: gvfs-set-attribute is found in gvfs-bin on Ubuntu
# systems and it seems to require an absolute filename)
gvfs-set-attribute \
	"$0" \
	"metadata::custom-icon" \
	"file://$RESOURCES/Squeak.png" \
		2> /dev/null

# zenity is part of GNOME
image_count=`ls "$RESOURCES"/*.image 2>/dev/null |wc -l`
if which zenity &>/dev/null && [ "$image_count"  -ne 1 ]; then
	olddir=`pwd`
	cd "$RESOURCES"
	image=`zenity --title 'Select an image' --file-selection --file-filter '*.image' --file-filter '*'`
	cd "$olddir"
else
	image="$RESOURCES/GemTools-1.0-beta.8.7-32x"
fi

# execute
exec "$LINUX/squeak" \
	-plugins "$LINUX" \
	-encoding latin1 \
	-vm-display-X11 \
	"$image"
.. and I'd think that you could just directly set the image file and skip the zenity code altogether and just use the line `image="$RESOURCES...` to set the image ... eliminating the zenity code works for my on Ubuntu 16.04 ...

I eliminating the zenity code and define the $RESOURCES 
but  the ./ 
GemTools-1.0-beta.8.7-31x.sh  report:

 
could not find module vm-display-X11
Annullato (core dump creato)

Okay, it sounds like you have not installed X support on your client machine ... To install the x support use the highlighted shell script commands in [1], [2]. and [3].

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L39-L59
[2] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L81-L85
[3] https://github.com/GsDevKit/GsDevKit_home/blob/master/bin/utils/installOsPrereqs#L63-L78


_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
GLASS mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: GemTools on Ubuntu system

GLASS mailing list
Ciao,
sorry but, before complicating the question, I wanted to understand the issue well.


I don't have the GemTools directory.

I have only copy the:
GemTools-1.0-beta.8.7-3101.app    from a MacBook system to Ubuntu 18.04 LTS system

That's what I expected you to do ..


I don't understand what do you do in the next lines.

in your GemTools*.sh script you should see the lines that are listed below (without the leading plusses) ..
This point is not clear to me.

My GemTools*.sh   is set to ( see point A )

. this is the code where zenity is used and you should be able to remove the conditional block that calls zenity ... if you don't have any code that looks (exactly) like this script code,

then send me your GemTools*.sh script that is in the GemTools.app directory.

see point A.


foos:GemTools-1.0-beta.8.7-340xx.app>./GemTools-1.0-beta.8.7-32x.sh &
When i run ( without zenity code ) the  GemTools-1.0-beta.8.7-3101.app>./GemTools-1.0-beta.8.7-31x.sh &

the system report only:

[ 1 ] 12345
could not find module vm-display-X11
 
[1] 12955
foos:GemTools-1.0-beta.8.7-340xx.app>+ dirname ./GemTools-1.0-beta.8.7-32x.sh
+ readlink -f .
+ ROOT=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app
+ LINUX=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686
+ RESOURCES=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources
+ gvfs-set-attribute ./GemTools-1.0-beta.8.7-32x.sh metadata::custom-icon file:///export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/Squeak.png
+ ls /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x.image
+ wc -l
+ image_count=1
+ 
+ [ 1 -ne 1 ]
+ image=/export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ exec /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686/squeak -plugins /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Linux686 -encoding latin1 -vm-display-X11 /export/foos1/users/dhenrich/GemTools/GemTools-1.0-beta.8.7-340xx.app/Contents/Resources/GemTools-1.0-beta.8.7-32x
+ which zenity
/usr/bin/zenity

Here's the listing of the GemTools startup script:

Point A) the following lines corresponds to my  GemTools-1.0-beta.8.7-31x.sh
#!/bin/sh

set -x

# path
ROOT=`readlink -f $(dirname $0)`
LINUX="$ROOT/Contents/Linux686"
RESOURCES="$ROOT/Contents/Resources"

# icon (note: gvfs-set-attribute is found in gvfs-bin on Ubuntu
# systems and it seems to require an absolute filename)
gvfs-set-attribute \
	"$0" \
	"metadata::custom-icon" \
	"file://$RESOURCES/Squeak.png" \
		2> /dev/null

# zenity is part of GNOME
image_count=`ls "$RESOURCES"/*.image 2>/dev/null |wc -l`
if which zenity &>/dev/null && [ "$image_count"  -ne 1 ]; then
	olddir=`pwd`
	cd "$RESOURCES"
	image=`zenity --title 'Select an image' --file-selection --file-filter '*.image' --file-filter '*'`
	cd "$olddir"
else
	image="$RESOURCES/GemTools-1.0-beta.8.7-31x.image"
fi

# execute
exec "$LINUX/squeak" \
	-plugins "$LINUX" \
	-encoding latin1 \
	-vm-display-X11 \
	"$image"


.. and I'd think that you could just directly set the image file and skip the zenity code altogether and just use the line `image="$RESOURCES...` to set the image ... eliminating the zenity code works for my on Ubuntu 16.04 ... 


I eliminating the zenity code and define the $RESOURCES 
but  the ./ 
GemTools-1.0-beta.8.7-31x.sh  report:

 
could not find module vm-display-X11
Annullato (core dump creato)

Okay, it sounds like you have not installed X support on your client machine ... To install the x support use the highlighted shell script commands in [1], [2]. and [3].

do you intend to run only line 39 on line 59?


But tODE client works well.

So the X support is loaded on the client machine !!!! ????

Thanks,

Dario


_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
Free forum by Nabble Edit this page