[Glass] 3.1.0.4 and Seaside 3.1

> Hi All,
>
> With James' release of the sexy GS for Mac, I'm overenthusiastic and making an attempt to get Seaside 3.1 and JQueryWidgetBox running in GS3.1.0.4 and here's the story… :)
>
> I opted (wisely or not) to load the bleedingEdge and the first issue was Esteban's addition of 'Seaside-Adaptor' for Pharo, but as he states in the comment "(not tested outside Pharo)"… fairy nuff.
>
> So I added the group to GemStone:
>
> group: 'Seaside-Adaptor' with: #('FastCGI' 'Seaside-GemStone-Adaptors-Zinc')
>
> I'm sure I don't need the Zinc adaptor (since I'm running OSXServer with FastCGI so will just be using it locally), but loaded it all the same… call me crazy.
>
> Loaded like a bought one.
>
> I then went to load version 2.8 of JQueryWidgetBox and found that the Seaside load didn't include JQuery or JQueryUI, and when JQWB attempted to load it there was a not found for "Zinc-HTTP":
>
> spec import: 'Zinc'.
> spec baseline: 'Zinc' with: [
> spec
> versionString: 'baseline';
> repository: 'github://glassdb/zinc:gemstone3.1/repository' ].
>
> Before I go too much further, am I chasing my own tail with Seaside 3.1 in GS3.1.0.4 at this stage?
>
> Kind Regards,
>
> Jupiter
> _______________________________________________
> Glass mailing list
> [hidden email]
> http://lists.gemtalksystems.com/mailman/listinfo/glass
>

> Does the configuration load without your modifications?
>
>
> Is 'loaded like a bought one'  good or bad?
>
> Re: Zinc- sounds like the same error from this thread:
> http://forum.world.st/Glass-Seaside-on-3-1-0-4-tp4709097.html
>
> Is it different than that?
>
>
>
> Before loading JQWB load JQueryUI using the Seaside3 config from
> smalltalkhub and see if loading JQWB works after that.
>
> Note also that the JQWB may not have been loaded/tested on 3.1 at all.
>
>
>
>
> On 09/26/2013 04:20 PM, Jupiter Jones wrote:
>> Hi All,
>>
>> With James' release of the sexy GS for Mac, I'm overenthusiastic and making an attempt to get Seaside 3.1 and JQueryWidgetBox running in GS3.1.0.4 and here's the story… :)
>>
>> I opted (wisely or not) to load the bleedingEdge and the first issue was Esteban's addition of 'Seaside-Adaptor' for Pharo, but as he states in the comment "(not tested outside Pharo)"… fairy nuff.
>>
>> So I added the group to GemStone:
>>
>> group: 'Seaside-Adaptor' with: #('FastCGI' 'Seaside-GemStone-Adaptors-Zinc')
>>
>> I'm sure I don't need the Zinc adaptor (since I'm running OSXServer with FastCGI so will just be using it locally), but loaded it all the same… call me crazy.
>>
>> Loaded like a bought one.
>>
>> I then went to load version 2.8 of JQueryWidgetBox and found that the Seaside load didn't include JQuery or JQueryUI, and when JQWB attempted to load it there was a not found for "Zinc-HTTP":
>>
>> spec import: 'Zinc'.
>> spec baseline: 'Zinc' with: [
>> spec
>> versionString: 'baseline';
>> repository: 'github://glassdb/zinc:gemstone3.1/repository' ].
>>
>> Before I go too much further, am I chasing my own tail with Seaside 3.1 in GS3.1.0.4 at this stage?
>>
>> Kind Regards,
>>
>> Jupiter
>> _______________________________________________
>> Glass mailing list
>> [hidden email]
>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>>
>
> _______________________________________________
> Glass mailing list
> [hidden email]
> http://lists.gemtalksystems.com/mailman/listinfo/glass