[Glass] GsDevKit and Ubuntu 14.04 desktop
Locked
[Glass] GsDevKit and Ubuntu 14.04 desktop
 
|
For ubuntu 14.04, I ended up using virtualbox and an ubuntu_14.04.1-desktop-amd64 vm. I installed the following packages (no need to install 64-bit X libraries, since I was using a desktop distribution): sudo apt-get install git sudo apt-get install curl sudo apt-get -y install libpam0g:i386 sudo apt-get libssl1.0.0:386 sudo apt-get libssl1.0.0:i386 sudo apt-get install -qq gcc-multilib libstdc++6:i386 sudo ln -s /usr/lib/i386-lin-gnu/libstdc++.so.6 /usr/lib/i386-linux-gnu/libstdc++.so sudo apt-get install libx11-6:i386 sudo apt-get install libgl1-mesa-dev:i386 sudo apt-get install libxcb-dri2-0:i386 Then did the following: cd gsDevKitHome git checkout -b 12.04 export GS_HOME=`pwd` export PATH=$GS_HOME/bin:$PATH installServer devKit 3.2.2 and the pharo-ui came up and i was able to log into the devKit stone .... Except for curl, libssl1.0.0 and the x servers, the list of packages installed is the same between 12.04 and 14.04... Dale _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GsDevKit and Ubuntu 14.04 desktop
|
|
Hi Dale,
Thank you very very much! Works like a charm here! So let's add the Web server and Seaside at CampSmalltalk and we have a new GLASS VM! CU then! Sebastian Am 09.09.2014 17:09, schrieb Dale Henrichs via Glass:
_______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GsDevKit and Ubuntu 14.04 desktop
|
|
Am 10.09.2014 um 02:29 schrieb Sebastian Heidbrink via Glass:
> Hi Dale, > > Thank you very very much! Works like a charm here! > Same here under Lubuntu 14.04LTS - IDE pops up. After a first real start - where's the browser ? Ok, I must look at some videos ... Marten -- Marten Feldtmann _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GsDevKit and Ubuntu 14.04 desktop
|
|
Good! ... I suggest bringing up man --all to view the documentation for the various commands that are available... For bringing up a browser look at the browse command or `man browse` ... keyboard shortcuts can be determined by looking at the menus ... for linux you will get best results by using the ALT key ... still fighting the keyboard mapping in Pharo3.0 .... I guess I will have to make some more videos:) Dale On Tue, Sep 9, 2014 at 10:26 PM, [hidden email] via Glass <[hidden email]> wrote: Am 10.09.2014 um 02:29 schrieb Sebastian Heidbrink via Glass: _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GsDevKit and Ubuntu 14.04 desktop
|
|
In reply to this post by GLASS mailing list
Since there has been a little bit more recent interest in tODE I would be willing to have a skype session or google hangout on tODE where folks can ask me specific questions about tODE and/or the GsDevKit ... Also I will remind folks to monitor the tode_st[1] mailing list as that's where I announce tODE updates ... Dale On Tue, Sep 9, 2014 at 10:26 PM, [hidden email] via Glass <[hidden email]> wrote: Am 10.09.2014 um 02:29 schrieb Sebastian Heidbrink via Glass: _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
[Glass] GS3.2.2 Seasise 3.1.2 Zinc FastCGI debugging
|
|
Hi All,
I am attempting to deploy a testing server on ubuntu and everything installs and starts up nicely. From tODE i can start the web server and connect, however when connecting via FastCGI I get a 500 - Internal Server error. The only log entry appears to be in lighttpd error.log… 2014-09-18 23:47:10: (mod_fastcgi.c.3032) got proc: pid: 0 socket: tcp:127.0.0.1:9003 load: 1 2014-09-18 23:47:39: (mod_fastcgi.c.2540) unexpected end-of-file (perhaps the fastcgi process died): pid: 0 socket: tcp:127.0.0.1:9003 2014-09-18 23:47:39: (mod_fastcgi.c.3326) response not received, request sent: 725 on socket: tcp:127.0.0.1:9003 for /?, closing connection 2014-09-18 23:47:39: (mod_fastcgi.c.1491) released proc: pid: 0 socket: tcp:127.0.0.1:9003 load: 0 How would I go about getting more debug info from the Zinc FastCGI server? There is nothing else installed in GemStone just seaside installed through tODE’s “project load Seaside3” Any help would be much appreciated. Cheers, Jupiter _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GS3.2.2 Seasise 3.1.2 Zinc FastCGI debugging
|
|
Juptier, If you are using fastCGI, then you should be using the FastCGI adaptor. If you haven't already loaded the FastCGI packages, add 'FastCGI' to your load list for the Seaside3 project entry: ^ TDProjectSpecEntryDefinition new configuration: 'Seaside3' version: '3.1.3' repository: loads: #('Development' 'Zinc' 'Examples' 'Tests' 'FastCGI'); status: #(#'active'); locked: false; yourself Then refresh the project list and use the 'load' menu item to load the Seaside3 project and the code for FastCGI will be loaded ... Then you can register and launch a fastCGI server using the following cd /home/seaside ./webServer --stop # stop running zinc server ./webServer --register=fastcgi --port=9003 # register the fastcgi adaptor ./webServer --start # start the fastcgi server Note that the webServer script only adds a single server/port ... if you want to launch several fastCGI servers, I can update the webServer script... Dale On Thu, Sep 18, 2014 at 5:07 PM, Jupiter Jones via Glass <[hidden email]> wrote: Hi All, _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GS3.2.2 Seasise 3.1.2 Zinc FastCGI debugging
|
|
It occurs to me that the handling of adaptors should be changed a bit to allow for being able to run multiple adaptors without having to go through the stop/register/stop cha cha ... On Thu, Sep 18, 2014 at 5:27 PM, Dale Henrichs <[hidden email]> wrote:
_______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GS3.2.2 Seasise 3.1.2 Zinc FastCGI debugging
|
|
In reply to this post by GLASS mailing list
Hi Dale,
Sorry for the delay. Yes this is exactly how I’m setup. I’m sure this is something simple I’ve missed. I have 2 identical machines - ubuntu 14.04, GSS3.2.2, lighted, fast cgi, seaside 3.1.2. The first linux server I loaded everything into GSS through a tODE “project load myProject” command and works like a dream. Well, almost :) Debugging was an issue as all the bebugging/walkback handlers either crashed the process with the good old “can't send call:...” message, or I simply got a page back with “Internal Error:” but no explanation. Debugging through zinc works as expected. The second linux server if the same config, however, the repository was restored on linux from a backup on mac - and FastCGI doesn’t work but Zinc does. I start the fcgi server (runSeasideGems30 start FastCGI “9001 9002 9003”) and can see the server has started and is listening on the right ports. I hit the seaside site and Lighttpd reports: 2014-10-06 10:02:21: (mod_fastcgi.c.3032) got proc: pid: 0 socket: tcp:127.0.0.1:9003 load: 1 2014-10-06 10:02:50: (mod_fastcgi.c.2540) unexpected end-of-file (perhaps the fastcgi process died): pid: 0 socket: tcp:127.0.0.1:9003 2014-10-06 10:02:50: (mod_fastcgi.c.3326) response not received, request sent: 715 on socket: tcp:127.0.0.1:9003 for /?, closing connection 2014-10-06 10:02:50: (mod_fastcgi.c.1491) released proc: pid: 0 socket: tcp:127.0.0.1:9003 load: 0 None of the fcgi processes crash, or log anything, just lighttpd reports a 500 - Internal Server Error. After a little hunting, I tried FSLog enable (I updated the log path but then realised it’s not used) however nothing is written to stdout or added to the ObjectLog. Although this scenario (backup on mac / restore on linux) is not our standard practice, it is something I do occasionally and I’d like to work out what I’ve done wrong. Thanks for any advice. Cheers, J On 19 Sep 2014, at 10:27 am, Dale Henrichs <[hidden email]> wrote:
_______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GS3.2.2 Seasise 3.1.2 Zinc FastCGI debugging
|
|
On Mon, Oct 6, 2014 at 3:12 PM, Jupiter Jones <[hidden email]> wrote:
I'm not familiare the "good old "can't send call:" message":) A little more detail (and a stack if you have one) ... I assume when you say "Debugging" that you are attempting to run the fastcgi server from within a tODE session? If so, then I would like to see the expression you use to start FastCGI...
For debugging "Internal Error:" pages and the like, I have a helper method: WABasicDevelopment setBreakPoints That sets breakpoints in a number of strategic places in the Seaside framework and that should bring up a debugger for the "Internal Error:" case ... I'm also wondering which error handler you are using. Print the following: WAAdmin applicationExceptionHandlingDefaults at: #'exceptionHandler' and let me know.
Okay, these error messages indicate that lighttpd is able to hit port 9003 ... getting the EOF implies that the thread or process was killed ... I am suspicious that there might be other processes already listening on the socket ... I'll try to spend some time today and bring up FastCGI in my environment and see if I can figure anything out ...
_______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] GS3.2.2 Seasise 3.1.2 Zinc FastCGI debugging
|
|
Jupiter, I took an Ubuntu 14.04 and installed lighttpd installed GemStone3.2.2 and created a tode stone and then loaded Seaside3.1.2 using this project entry:^ TDProjectSpecEntryDefinition new configuration: 'Seaside3' version: '3.1.2' repository: 'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main' loads: #('Development' 'Zinc' 'FastCGI' 'Examples' 'Tests'); status: #(#'active'); locked: false; yourself ----- Method: WAGemStoneRunSeasideGems class>>executeGemCommand: (in category 'running script') -----executeGemCommand: command | commandLine | Transcript cr; show: '---' , command , ' Seaside gems' , ' ('; show: TimeStamp now printString; show: ')'. commandLine := (GsFile _expandEnvVariable: 'GEMSTONE' isClient: false) , '/' + , 'seaside/bin/runSeasideGems30 ' , command , ' ' , self default name , ' ' + , self defaultPortString. - , (System stoneName findTokens: $!!) last , '/bin/runSeasideGems30 ' - , command , ' ' , self default name , ' ' , self defaultPortString. Transcript cr; show: (System performOnServer: commandLine) withSqueakLineEndings. Transcript cr; show: '---Finished Seaside gems ' , command , ' ('; show: TimeStamp now printString; show: ')'! and has been my luck ... everything works fine ... I was using a single FastCGI gem and here's the config: server.modules += ( "mod_fastcgi", "mod_proxy" ) $HTTP["url"] =~ "^/image/" { server.document-root = "/var/www" #} else $HTTP["url"] =~ "^/seaside" { } else $HTTP["url"] =~ "^/" { fastcgi.server = ( # "/seaside" => "/" => ( ("host" => "192.168.100.131","port" => 9001,"check-local" => "disable","mode" => "responder" ), # ("host" => "192.168.100.131","port" => 9002,"check-local" => "disable","mode" => "responder" ), # ("host" => "192.168.100.131","port" => 9003,"check-local" => "disable","mode" => "responder" ), ), ) } So I am using the ip address of the ubuntu box for lighttpd and the url ... I guess I would like to see the topaz log for your fastcgi servers to see if anything obvious shows up ... Dale On Tue, Oct 7, 2014 at 9:39 AM, Dale Henrichs <[hidden email]> wrote:
_______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
[Glass] Seaside 3.1.3 Install Issue - Not Found Seaside-HTML5
|
|
In reply to this post by GLASS mailing list
I’ve updated my configuration to load Seaside 3.1.3 however the load produces the following issue:
Seaside3 baselinea UserDefinedError occurred (error 2318), reason:halt, Name not found: Seaside-HTML5 I looked in: https://github.com/GsDevKit/Seaside31/tree/gs_master/repository …but didn’t see the Seaside-HTML5 package. Should I still be using 3.1.2? Cheers, Jupiter _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] Seaside 3.1.3 Install Issue - Not Found Seaside-HTML5
|
|
Jupiter, It looks that package is from Seaside3.0 .... In Seaside3.1 I'm not sure where the code that was in System-HTMML5 went... Perhaps Johan or Philippe can shed some light? Once we get that figured out, I can work out a load scheme:) On Tue, Oct 7, 2014 at 5:16 PM, Jupiter Jones <[hidden email]> wrote: I’ve updated my configuration to load Seaside 3.1.3 however the load produces the following issue: _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] Seaside 3.1.3 Install Issue - Not Found Seaside-HTML5
|
|
s/System-HTMML5/Seaside-HTML5/ On Tue, Oct 7, 2014 at 5:23 PM, Dale Henrichs <[hidden email]> wrote:
_______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
Re: [Glass] Seaside 3.1.3 Install Issue - Not Found Seaside-HTML5
|
|
In reply to this post by GLASS mailing list
Seaside 3.1 changed to HTML5 by default, so that package was integrated into the core.
|
Re: [Glass] Seaside 3.1.3 Install Issue - Not Found Seaside-HTML5
|
|
Thanks Paul, Jupiter, just delete the package (no need to unload it) that will leave the classes in the image and the load should complete Dale On Tue, Oct 7, 2014 at 8:48 PM, Paul DeBruicker via Glass <[hidden email]> wrote: Seaside 3.1 changed to HTML5 by default, so that package was integrated into _______________________________________________ Glass mailing list [hidden email] http://lists.gemtalksystems.com/mailman/listinfo/glass |
«
Return to GLASS
|
1 view|%1 views
| Free forum by Nabble | Edit this page |