How to start an image with PORT parameter

> Date: Wed, 15 Jul 2009 06:53:56 +0200
> Subject: Re: [Seaside] WAKom
> From: [hidden email]
> To: [hidden email]
>
> 2009/7/15, Robert Sirois <[hidden email]>:
> >
> > WAKom doesn't work in Pharo? I believe I have the correct image and VM:
> >
> > I'm getting the following from 'WAKom startOn: 9050':
> >
> > 'BlockClosure(Object)>>doesNotUnderstand: #newProcessWithBindings:'
>
> For the closure images you need to load the latest, DynamicBindings,
> KomHttpServer and Seaside from:
> http://www.squeaksource.com/KomHttpServer
> http://www.squeaksource.comSeaside
>
> Cheers
> Philippe
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> Date: Wed, 15 Jul 2009 07:04:23 +0200
> Subject: Re: [Seaside] WAKom
> From: [hidden email]
> To: [hidden email]
>
> 2009/7/15, Robert Sirois <[hidden email]>:
> >
> > The Kom server appears to be running now, but at localhost it displays:
> >
> > '[closure] in WATableTag(WATagBrush)>>with:'
>
> Did you also load the latest Seaside 2.8?
> Do you have a full stack trace?
>
> Cheers
> Philippe
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> 2009/7/14, Germán Arduino <[hidden email]>:
>
> > Hi:
>  >
>  > As far as I saw on some doc it's possible to start a seaside image in
>  > the way: "squeakvm seaside.image PORT nnnn". Then, as WAKom check this
>  > parameter on its #startUp method, is posible to have it running on the
>  > passed port.
>
>
> Try:
>
>
>  squeakvm seaside.image -- PORT nnnn
>
>
> Squeak is a bit peculiar when it comes to command line arguments.
>
>  Cheers
>  Philippe
>  _______________________________________________
>  seaside mailing list
>  [hidden email]
>  http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>

> Cheers.
> Germán.
>
> 2009/7/15, Philippe Marschall <[hidden email]>:
> > 2009/7/14, Germán Arduino <[hidden email]>:
> >
> > > Hi:
> >  >
> >  > As far as I saw on some doc it's possible to start a seaside image in
> >  > the way: "squeakvm seaside.image PORT nnnn". Then, as WAKom check this
> >  > parameter on its #startUp method, is posible to have it running on the
> >  > passed port.
> >
> >
> > Try:
> >
> >
> >  squeakvm seaside.image -- PORT nnnn
> >
> >
> > Squeak is a bit peculiar when it comes to command line arguments.
> >
> >  Cheers
> >  Philippe
> >  _______________________________________________
> >  seaside mailing list
> >  [hidden email]
> >  http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

>
>
> 2009/7/15 Miguel Enrique Cobá Martinez <[hidden email]>
>         El mié, 15-07-2009 a las 17:57 -0300, Germán Arduino escribió:
>         > Tried, but don't works.
>         >
>         > I got the same error.
>         >
>        
>        
>         I use this script to start a magma image an serveral seaside
>         images:
>        
>         #!/bin/sh
>        
>         NOHUP="/usr/bin/nohup"
>         SQUEAK_VM="/usr/bin/squeakvm"
>         SQUEAK_OPTS="-mmap 100m -vm-sound-null -vm-display-X11
>         -headless"
>         SQUEAK="$SQUEAK_VM $SQUEAK_OPTS"
>         IMAGES_HOME="/home/miguel/squeak/images/azteca"
>         SCRIPTS_HOME="/home/miguel/squeak/scripts/azteca"
>         LOGS_HOME="/home/miguel/squeak/logs/azteca"
>         START_PORT=8080
>         END_PORT=8093
>        
>        
>         # Start the Magma image
>         echo "Starting Magma image"
>         $NOHUP $SQUEAK $IMAGES_HOME/magma.image $SCRIPTS_HOME/magma.st
>         >>
>         $LOGS_HOME/magma.nohup &
>        
>         # Start the Seaside images
>         for PORT in `seq $START_PORT $END_PORT`; do
>          echo "Starting Seaside image on port: $port"
>          $NOHUP $SQUEAK $IMAGES_HOME/seaside.image
>         $SCRIPTS_HOME/seaside.st
>
> Nice script!!!  I will base my future ones on this :)
>
> What I don't understand here is which type of scripts you send as
> parameters to squeakVM. Scripts to the VM ?? Can you show me some
> examples of  what you have in $SCRIPTS_HOME/seaside.st ??
>

>        
>         done
>        
>        
>         check the order of the parameters that stablish the port for
>         the seaside
>         image.
>        
>        
>         > Cheers.
>         > Germán.
>         >
>         > 2009/7/15, Philippe Marschall
>         <[hidden email]>:
>         > > 2009/7/14, Germán Arduino <[hidden email]>:
>         > >
>         > > > Hi:
>         > >  >
>         > >  > As far as I saw on some doc it's possible to start a
>         seaside image in
>         > >  > the way: "squeakvm seaside.image PORT nnnn". Then, as
>         WAKom check this
>         > >  > parameter on its #startUp method, is posible to have it
>         running on the
>         > >  > passed port.
>         > >
>         > >
>         > > Try:
>         > >
>         > >
>         > >  squeakvm seaside.image -- PORT nnnn
>         > >
>         > >
>         > > Squeak is a bit peculiar when it comes to command line
>         arguments.
>         > >
>         > >  Cheers
>         > >  Philippe
>         > >  _______________________________________________
>         > >  seaside mailing list
>         > >  [hidden email]
>         > >
>          http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>         > >
>         > _______________________________________________
>         > seaside mailing list
>         > [hidden email]
>         >
>         http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>        
>         _______________________________________________
>         seaside mailing list
>         [hidden email]
>         http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>        
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> Date: Thu, 16 Jul 2009 09:12:35 +0200
> Subject: Re: [Seaside] WAKom
> From: [hidden email]
> To: [hidden email]
>
> 2009/7/15 Robert Sirois <[hidden email]>:
> > Oh, I'm sorry. I'm using Seaside 2.9a3...
>
> Ok, you need to update to the latest Seaside 2.9 code. Unfortunately
> we have no easy to use solution yet.
>
> Cheers
> Philippe
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> El mié, 15-07-2009 a las 17:57 -0300, Germán Arduino escribió:
>> Tried, but don't works.
>>
>> I got the same error.
>>
>
> I use this script to start a magma image an serveral seaside images:
>
> #!/bin/sh
>
> NOHUP="/usr/bin/nohup"
> SQUEAK_VM="/usr/bin/squeakvm"
> SQUEAK_OPTS="-mmap 100m -vm-sound-null -vm-display-X11 -headless"
> SQUEAK="$SQUEAK_VM $SQUEAK_OPTS"
> IMAGES_HOME="/home/miguel/squeak/images/azteca"
> SCRIPTS_HOME="/home/miguel/squeak/scripts/azteca"
> LOGS_HOME="/home/miguel/squeak/logs/azteca"
> START_PORT=8080
> END_PORT=8093
>
>
> # Start the Magma image
> echo "Starting Magma image"
> $NOHUP $SQUEAK $IMAGES_HOME/magma.image $SCRIPTS_HOME/magma.st >>
> $LOGS_HOME/magma.nohup &
>
> # Start the Seaside images
> for PORT in `seq $START_PORT $END_PORT`; do
>  echo "Starting Seaside image on port: $port"
>  $NOHUP $SQUEAK $IMAGES_HOME/seaside.image $SCRIPTS_HOME/seaside.st
> port $PORT >> $LOGS_HOME/seaside.nohup &
> done

> On Thu, Jul 16, 2009 at 7:03 PM, Germán Arduino <[hidden email]>
> wrote:
>         Hola Miguel!
>         Can you explain me a bit how works the PORT variable?
>        
>         I can't make that the image read the port parameter :(
>
>
> I am also a bit in a dark here, so any explanation is welcome!
>
>
> One related question. If I intend to start image with port parameter,
> should I save image with seaside allready running on that port or not?
>
>
> What happens if saved image is running on different port than one in
> command line?

> What happens if saved image is running on some port that is at the
> moment of image restart not anymore available?
>
>
> Thanks!
>
>
> rush
> http://www.cloud208.com/
>  
>        
>         Thanks in advance.
>        
>         _______________________________________________
>         seaside mailing list
>         [hidden email]
>         http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>        
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> Hola Miguel!
>
> Thanks by your response.
>
> El 15 de julio de 2009 21:03, Miguel Enrique Cobá
> Martinez<[hidden email]> escribió:
> > El mié, 15-07-2009 a las 17:57 -0300, Germán Arduino escribió:
> >> Tried, but don't works.
> >>
> >> I got the same error.
> >>
> >
> > I use this script to start a magma image an serveral seaside images:
> >
> > #!/bin/sh
> >
> > NOHUP="/usr/bin/nohup"
> > SQUEAK_VM="/usr/bin/squeakvm"
> > SQUEAK_OPTS="-mmap 100m -vm-sound-null -vm-display-X11 -headless"
> > SQUEAK="$SQUEAK_VM $SQUEAK_OPTS"
> > IMAGES_HOME="/home/miguel/squeak/images/azteca"
> > SCRIPTS_HOME="/home/miguel/squeak/scripts/azteca"
> > LOGS_HOME="/home/miguel/squeak/logs/azteca"
> > START_PORT=8080
> > END_PORT=8093
> >
> >
> > # Start the Magma image
> > echo "Starting Magma image"
> > $NOHUP $SQUEAK $IMAGES_HOME/magma.image $SCRIPTS_HOME/magma.st >>
> > $LOGS_HOME/magma.nohup &
> >
> > # Start the Seaside images
> > for PORT in `seq $START_PORT $END_PORT`; do
> >  echo "Starting Seaside image on port: $port"
> >  $NOHUP $SQUEAK $IMAGES_HOME/seaside.image $SCRIPTS_HOME/seaside.st
> > port $PORT >> $LOGS_HOME/seaside.nohup &
> > done
>
> Can you explain me a bit how works the PORT variable?
>
> I can't make that the image read the port parameter :(
>

> El jue, 16-07-2009 a las 14:03 -0300, Germán Arduino escribió:
>
> > Hola Miguel!
>  >
>  > Thanks by your response.
>  >
>  > El 15 de julio de 2009 21:03, Miguel Enrique Cobá
>  > Martinez<[hidden email]> escribió:
>  > > El mié, 15-07-2009 a las 17:57 -0300, Germán Arduino escribió:
>  > >> Tried, but don't works.
>  > >>
>  > >> I got the same error.
>  > >>
>  > >
>  > > I use this script to start a magma image an serveral seaside images:
>  > >
>  > > #!/bin/sh
>  > >
>  > > NOHUP="/usr/bin/nohup"
>  > > SQUEAK_VM="/usr/bin/squeakvm"
>  > > SQUEAK_OPTS="-mmap 100m -vm-sound-null -vm-display-X11 -headless"
>  > > SQUEAK="$SQUEAK_VM $SQUEAK_OPTS"
>  > > IMAGES_HOME="/home/miguel/squeak/images/azteca"
>  > > SCRIPTS_HOME="/home/miguel/squeak/scripts/azteca"
>  > > LOGS_HOME="/home/miguel/squeak/logs/azteca"
>  > > START_PORT=8080
>  > > END_PORT=8093
>  > >
>  > >
>  > > # Start the Magma image
>  > > echo "Starting Magma image"
>  > > $NOHUP $SQUEAK $IMAGES_HOME/magma.image $SCRIPTS_HOME/magma.st >>
>  > > $LOGS_HOME/magma.nohup &
>  > >
>  > > # Start the Seaside images
>  > > for PORT in `seq $START_PORT $END_PORT`; do
>  > >  echo "Starting Seaside image on port: $port"
>  > >  $NOHUP $SQUEAK $IMAGES_HOME/seaside.image $SCRIPTS_HOME/seaside.st
>  > > port $PORT >> $LOGS_HOME/seaside.nohup &
>  > > done
>  >
>  > Can you explain me a bit how works the PORT variable?
>  >
>  > I can't make that the image read the port parameter :(
>  >
>
>
> Maybe your are using a wrapper around the real squeakvm executable and
>  the wrapper doesn't respect the parameter order.
>  Try using the squeak vm direct from the command line.
>  On Linux use which to get the real path of the command and then file it
>  to see the type:
>
>  $ which squeak
>  $ file /path/to/squeak
>
>  In my Debian GNU/Linux 5.0 (Lenny) I get:
>
>  miguel@laptop:~$ which squeak
>  /usr/bin/squeak
>  miguel@laptop:~$ file /usr/bin/squeak
>  /usr/bin/squeak: Bourne-Again shell script text executable
>  miguel@laptop:~$ cat /usr/bin/squeak
>  #! /bin/bash
>
>  # File:        squeak
>  # Author:      José L. Redrejo Rodríguez
>  <[hidden email]>
>
>  <follows a very long script>
>
>  but with squeakvm
>
>  miguel@laptop:~$ which squeakvm
>  /usr/bin/squeakvm
>  miguel@laptop:~$ file /usr/bin/squeakvm
>  /usr/bin/squeakvm: symbolic link to `../lib/squeak/3.10-3/squeak'
>
>  Also, by executing each command from command line:
>  miguel@laptop:~$ squeak --help
>  found gettext in path
>  /home/miguel
>  Could not open the Squeak image file `--help'.
>
>  There are three ways to open a Squeak image file.  You can:
>   1. Put copies of the default image and changes files in this
>  directory.
>   2. Put the name of the image file on the command line when you
>      run squeak (use the `-help' option for more information).
>   3. Set the environment variable SQUEAK_IMAGE to the name of the image
>      that you want to use by default.
>
>  For more information, type: `man squeak' (without the quote characters).
>  miguel@laptop:~$ squeakvm --help
>  unknown option: --help
>  Usage: squeakvm [<option>...] [<imageName> [<argument>...]]
>        squeakvm [<option>...] -- [<argument>...]
>
>  ALSA <option>s:
>   -nomixer              disable mixer (volume) adjustment
>   -soundcard <name>     open the named sound card (default: default)
>   -playback <name>      play to the named sound device (default: Master)
>   -capture <name>       record from the named sound device (default:
>  Capture)
>
>  OSS <option>s:
>   -nomixer              disable mixer (volume) adjustment
>
>  FBDev <option>s:
>   -fbdev <dev>          use framebuffer device <dev> (default: /dev/fb)
>   -kbmap <file>         load keymap from <file> (default: use kernel
>  keymap)
>   -msdev <dev>          use mouse device <dev> (default: /dev/psaux)
>   -msproto <protocol>   use the given <protocol> for the mouse (default:
>  ps2)
>   -vtlock               disallow all vt switching (for any reason)
>   -vtswitch             enable keyboard vt switching (Alt+FNx)
>
>  X11 <option>s:
>   -browserWindow <wid>  run in window <wid>
>   -browserPipes <r> <w> run as Browser plugin using descriptors <r> <w>
>   -cmdmod <n>           map Mod<n> to the Command key
>   -compositioninput     enable overlay window for composed characters
>   -display <dpy>        display on <dpy> (default: $DISPLAY)
>   -fullscreen           occupy the entire screen
>   -glxdebug <n>         set GLX debug verbosity level to <n>
>   -headless             run in headless (no window) mode
>   -iconic               start up iconified
>   -lazy                 go to sleep when main window unmapped
>   -mapdelbs             map Delete key onto Backspace
>   -nointl               disable international keyboard support
>   -notitle              disable the Squeak window title bar
>   -noxdnd               disable X drag-and-drop protocol support
>   -optmod <n>           map Mod<n> to the Option key
>   -swapbtn              swap yellow (middle) and blue (right) buttons
>   -xasync               don't serialize display updates
>   -xicfont <f>          use font set <f> for the input context overlay
>   -xshm                 use X shared memory extension
>
>  Common <option>s:
>   -encoding <enc>       set the internal character encoding (default:
>  MacRoman)
>   -help                 print this help message, then exit
>   -memory <size>[mk]    use fixed heap size (added to image size)
>   -mmap <size>[mk]      limit dynamic heap size (default: 1024m)
>   -noevents             disable event-driven input support
>   -notimer              disable interval timer for low-res clock
>   -pathenc <enc>        set encoding for pathnames (default: UTF-8)
>   -plugins <path>       specify alternative plugin location (see
>  manpage)
>   -textenc <enc>        set encoding for external text (default: UTF-8)
>   -version              print version information, then exit
>   -vm-<sys>-<dev>       use the <dev> driver for <sys> (see below)
>  Deprecated:
>   -display <dpy>        quivalent to '-vm-display-X11 -display <dpy>'
>   -headless             quivalent to '-vm-display-X11 -headless'
>   -nodisplay            quivalent to '-vm-display-null'
>   -nosound              quivalent to '-vm-sound-null'
>   -quartz               quivalent to '-vm-display-Quartz'
>
>  Notes:
>   <imageName> defaults to `squeak.image'.
>   -vtlock disables keyboard vt switching even when -vtswitch is enabled
>   Using `unix:0' for <dpy> may improve local display performance.
>   -xshm only works when Squeak is running on the X server host.
>   If `-memory' is not specified then the heap will grow dynamically.
>   <argument>s are ignored, but are processed by the Squeak image.
>   The first <argument> normally names a Squeak `script' to execute.
>   Precede <arguments> by `--' to use default image.
>
>  Available drivers:
>   vm-sound-null
>   vm-sound-ALSA
>   vm-sound-OSS
>   vm-sound-NAS
>   vm-display-null
>   vm-display-fbdev
>   vm-display-X11
>  miguel@laptop:~$
>
>  So maybe you're trying to use the wrong command to start your image.
>
>  Cheers,
>  Miguel Cobá
>
>  > Thanks in advance.
>
> > _______________________________________________
>  > seaside mailing list
>  > [hidden email]
>  > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>  _______________________________________________
>  seaside mailing list
>  [hidden email]
>  http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>