Issue 1017 in moose-technology: RadialTreeLayout does not work properly
Locked
Issue 1017 in moose-technology: RadialTreeLayout does not work properly
 
|
Status: New
Owner: ---- CC: [hidden email] Labels: Type-Defect Priority-Medium Component-Roassal Milestone-5.0 New issue 1017 by [hidden email]: RadialTreeLayout does not work properly http://code.google.com/p/moose-technology/issues/detail?id=1017 Try this: view := ROMondrianViewBuilder new. view nodes: (1 to: 99). view edgesFrom: [ :x | x // 10 ]. view radialTreeLayout. view open You will see only one tree. We should see ten. See here: view := ROMondrianViewBuilder new. view nodes: (1 to: 99). view edgesFrom: [ :x | x // 10 ]. view treeLayout. view open -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Comment #1 on issue 1017 by [hidden email]: RadialTreeLayout does not work properly http://code.google.com/p/moose-technology/issues/detail?id=1017 On the other hand, NarrowRadialTreeLayout works fine. view := ROMondrianViewBuilder new. view nodes: (1 to: 99). view edgesFrom: [ :x | x // 10 ]. view radialNarrowTreeLayout. view open -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Comment #2 on issue 1017 by [hidden email]: RadialTreeLayout does not work properly http://code.google.com/p/moose-technology/issues/detail?id=1017 We will have a look at it. -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Comment #3 on issue 1017 by [hidden email]: RadialTreeLayout does not work properly http://code.google.com/p/moose-technology/issues/detail?id=1017 But, here is something even more fishy. When nested, RadialNarrowTreeLayout works in a funny way: view := ROMondrianViewBuilder new. view node: #a forIt: [ view nodes: (1 to: 99). view edgesFrom: [ :x | x // 10 ]. view radialNarrowTreeLayout ]. view open At the same time, the ragular TreeLayout works fine: view := ROMondrianViewBuilder new. view node: #a forIt: [ view nodes: (1 to: 99). view edgesFrom: [ :x | x // 10 ]. view treeLayout ]. view open -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Hi all,
it seems I hit this bug... Trying to reproduce my thing with an arbitrary set, but, yes, nesting made it really strange (and the regular tree layout worked once nested). Thierry Le 27/11/2013 14:25, [hidden email] a écrit : > > Comment #3 on issue 1017 by [hidden email]: RadialTreeLayout does > not work properly > http://code.google.com/p/moose-technology/issues/detail?id=1017 > > But, here is something even more fishy. When nested, > RadialNarrowTreeLayout works in a funny way: > > view := ROMondrianViewBuilder new. > view node: #a forIt: [ > view nodes: (1 to: 99). > view edgesFrom: [ :x | x // 10 ]. > view radialNarrowTreeLayout ]. > view open > > At the same time, the ragular TreeLayout works fine: > view := ROMondrianViewBuilder new. > view node: #a forIt: [ > view nodes: (1 to: 99). > view edgesFrom: [ :x | x // 10 ]. > view treeLayout ]. > view open > -- Thierry Goubier CEA list Laboratoire des Fondations des Systèmes Temps Réel Embarqués 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Indeed. Thanks for reporting it. Just a note: If you want to report a problem related to Roassal, you can just build anonymous graphs using numbers. For example, here is a more complicated graph:
view := ROMondrianViewBuilder new. view nodes: (1 to: 5) forEach: [ :each | view nodes: ((each * 10) to: (each * 20)). view edgesFrom: [ :x |
((x - (each * 10)) // 2) + ((each * 10)) ]. view treeLayout ]. view gridLayout. view open
Doru On Wed, Nov 27, 2013 at 2:42 PM, Goubier Thierry <[hidden email]> wrote: Hi all, "Every thing has its own flow"
_______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Thanks.
I just started to use Roassal last thursday, and it's taking me a bit to get my head around the API (and if I should use the ROMondrianViewBuilder API or directly into the raw view: ended up using both...) Thierry Le 27/11/2013 14:37, Tudor Girba a écrit : > Indeed. Thanks for reporting it. > > Just a note: If you want to report a problem related to Roassal, you can > just build anonymous graphs using numbers. For example, here is a more > complicated graph: > view := ROMondrianViewBuilder new. > view nodes: (1 to: 5) forEach: [ :each | > view nodes: ((each * 10) to: (each * 20)). > view edgesFrom: [ :x | > ((x - (each * 10)) // 2) + ((each * 10)) ]. > view treeLayout ]. > view gridLayout. > view open > > Doru > > > > > On Wed, Nov 27, 2013 at 2:42 PM, Goubier Thierry <[hidden email] > <mailto:[hidden email]>> wrote: > > Hi all, > > it seems I hit this bug... Trying to reproduce my thing with an > arbitrary set, but, yes, nesting made it really strange (and the > regular tree layout worked once nested). > > Thierry > > Le 27/11/2013 14:25, moose-technology@googlecode.__com > <mailto:[hidden email]> a écrit : > > > Comment #3 on issue 1017 by [hidden email] > <mailto:[hidden email]>: RadialTreeLayout does > not work properly > http://code.google.com/p/__moose-technology/issues/__detail?id=1017 > <http://code.google.com/p/moose-technology/issues/detail?id=1017> > > But, here is something even more fishy. When nested, > RadialNarrowTreeLayout works in a funny way: > > view := ROMondrianViewBuilder new. > view node: #a forIt: [ > view nodes: (1 to: 99). > view edgesFrom: [ :x | x // 10 ]. > view radialNarrowTreeLayout ]. > view open > > At the same time, the ragular TreeLayout works fine: > view := ROMondrianViewBuilder new. > view node: #a forIt: [ > view nodes: (1 to: 99). > view edgesFrom: [ :x | x // 10 ]. > view treeLayout ]. > view open > > > -- > Thierry Goubier > CEA list > Laboratoire des Fondations des Systèmes Temps Réel Embarqués > 91191 Gif sur Yvette Cedex > France > Phone/Fax: +33 (0) 1 69 08 32 92 > <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 > > _________________________________________________ > Moose-dev mailing list > [hidden email] <mailto:[hidden email]> > https://www.iam.unibe.ch/__mailman/listinfo/moose-dev > <https://www.iam.unibe.ch/mailman/listinfo/moose-dev> > > > > > -- > www.tudorgirba.com <http://www.tudorgirba.com> > > "Every thing has its own flow" > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > -- Thierry Goubier CEA list Laboratoire des Fondations des Systèmes Temps Réel Embarqués 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
In reply to this post by moose-technology
Comment #4 on issue 1017 by [hidden email]: RadialTreeLayout does not work properly http://code.google.com/p/moose-technology/issues/detail?id=1017 Roassal 1.499 fixes this. Thanks to Milton! -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Re: Issue 1017 in moose-technology: RadialTreeLayout does not work properly
|
|
Updates:
Status: Fixed Comment #5 on issue 1017 by [hidden email]: RadialTreeLayout does not work properly http://code.google.com/p/moose-technology/issues/detail?id=1017 (No comment was entered for this change.) -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
|
|
In reply to this post by Goubier Thierry
The basic thing is the following:
- Mondrian is built at the top of Roassal - Use Mondrian to do static view (with no or very little animation/interaction) - Use directly Roassal if you want animation, dynamic coloring, adding/removing elements Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. On Nov 27, 2013, at 11:00 AM, Goubier Thierry <[hidden email]> wrote: > Thanks. > > I just started to use Roassal last thursday, and it's taking me a bit to get my head around the API (and if I should use the ROMondrianViewBuilder API or directly into the raw view: ended up using both...) > > Thierry > > Le 27/11/2013 14:37, Tudor Girba a écrit : >> Indeed. Thanks for reporting it. >> >> Just a note: If you want to report a problem related to Roassal, you can >> just build anonymous graphs using numbers. For example, here is a more >> complicated graph: >> view := ROMondrianViewBuilder new. >> view nodes: (1 to: 5) forEach: [ :each | >> view nodes: ((each * 10) to: (each * 20)). >> view edgesFrom: [ :x | >> ((x - (each * 10)) // 2) + ((each * 10)) ]. >> view treeLayout ]. >> view gridLayout. >> view open >> >> Doru >> >> >> >> >> On Wed, Nov 27, 2013 at 2:42 PM, Goubier Thierry <[hidden email] >> <mailto:[hidden email]>> wrote: >> >> Hi all, >> >> it seems I hit this bug... Trying to reproduce my thing with an >> arbitrary set, but, yes, nesting made it really strange (and the >> regular tree layout worked once nested). >> >> Thierry >> >> Le 27/11/2013 14:25, moose-technology@googlecode.__com >> <mailto:[hidden email]> a écrit : >> >> >> Comment #3 on issue 1017 by [hidden email] >> <mailto:[hidden email]>: RadialTreeLayout does >> not work properly >> http://code.google.com/p/__moose-technology/issues/__detail?id=1017 >> <http://code.google.com/p/moose-technology/issues/detail?id=1017> >> >> But, here is something even more fishy. When nested, >> RadialNarrowTreeLayout works in a funny way: >> >> view := ROMondrianViewBuilder new. >> view node: #a forIt: [ >> view nodes: (1 to: 99). >> view edgesFrom: [ :x | x // 10 ]. >> view radialNarrowTreeLayout ]. >> view open >> >> At the same time, the ragular TreeLayout works fine: >> view := ROMondrianViewBuilder new. >> view node: #a forIt: [ >> view nodes: (1 to: 99). >> view edgesFrom: [ :x | x // 10 ]. >> view treeLayout ]. >> view open >> >> >> -- >> Thierry Goubier >> CEA list >> Laboratoire des Fondations des Systèmes Temps Réel Embarqués >> 91191 Gif sur Yvette Cedex >> France >> Phone/Fax: +33 (0) 1 69 08 32 92 >> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 >> >> _________________________________________________ >> Moose-dev mailing list >> [hidden email] <mailto:[hidden email]> >> https://www.iam.unibe.ch/__mailman/listinfo/moose-dev >> <https://www.iam.unibe.ch/mailman/listinfo/moose-dev> >> >> >> >> >> -- >> www.tudorgirba.com <http://www.tudorgirba.com> >> >> "Every thing has its own flow" >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> > > -- > Thierry Goubier > CEA list > Laboratoire des Fondations des Systèmes Temps Réel Embarqués > 91191 Gif sur Yvette Cedex > France > Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
«
Return to Moose
|
1 view|%1 views
| Free forum by Nabble | Edit this page |