Load PetitGui with minimal dependency

>
> On 28 February 2012 18:35, Norbert Hartl <[hidden email]> wrote:
>> Is there a way to load PetitGui with a smaller set of dependecies? Or is Magritte and Grease and etc. needed for the GUI? Loading PetitParser default loads default of Glamour, too. And that's quite a lot.
>>
>> thanks,
>>
>> Norbert
>> _______________________________________________
>> Moose-dev mailing list
>> [hidden email]
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
>
> --
> Lukas Renggli
> www.lukas-renggli.ch
> _______________________________________________
> Moose-dev mailing list
> [hidden email]
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev

>
> Am 28.02.2012 um 18:55 schrieb Lukas Renggli:
>
>>     https://github.com/renggli/builder/blob/master/scripts/petitparser.st
>>     https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>>
>> Things are mostly independent. To get a minimal setup only load
>> 'PetitParser'. Some parts of the PetitGui use 'PetitAnalizer', so you
>> probably want to load that too, but should not be a strict
>> requirement.
>>
>>
> What image are you using to build?
>
>  I did now a lot of tries with pharo 1.3 13315, 13325 to load via metacello but nothing works. Loading your scripts I get an unresolved PaginatedMorphTreeModel that is used by GLMTreeMorphModel. If I did nothing wrong then it is hard to "just" load petit gui into a 1.3 image.
>
> Norbert
>>
>> On 28 February 2012 18:35, Norbert Hartl <[hidden email]> wrote:
>>> Is there a way to load PetitGui with a smaller set of dependecies? Or is Magritte and Grease and etc. needed for the GUI? Loading PetitParser default loads default of Glamour, too. And that's quite a lot.
>>>
>>> thanks,
>>>
>>> Norbert
>>> _______________________________________________
>>> Moose-dev mailing list
>>> [hidden email]
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>>
>> --
>> Lukas Renggli
>> www.lukas-renggli.ch
>> _______________________________________________
>> Moose-dev mailing list
>> [hidden email]
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
> _______________________________________________
> Moose-dev mailing list
> [hidden email]
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev

>     https://github.com/renggli/builder/blob/master/scripts/petitparser.st
>     https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>
> Things are mostly independent. To get a minimal setup only load
> 'PetitParser'. Some parts of the PetitGui use 'PetitAnalizer', so you
> probably want to load that too, but should not be a strict
> requirement.
>
> Lukas
>
>
> On 28 February 2012 18:35, Norbert Hartl <[hidden email]> wrote:
>> Is there a way to load PetitGui with a smaller set of dependecies? Or is Magritte and Grease and etc. needed for the GUI? Loading PetitParser default loads default of Glamour, too. And that's quite a lot.
>>
>> thanks,
>>
>> Norbert
>> _______________________________________________
>> Moose-dev mailing list
>> [hidden email]
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
>
> --
> Lukas Renggli
> www.lukas-renggli.ch

> Thank you for pointing out. Recent changes in Glamour broke my builds
> too (http://jenkins.lukas-renggli.ch/job/PetitParser/). See the
> updated load script for the fix:
>
>    https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>
> Lukas
>
> On 28 February 2012 18:55, Lukas Renggli <[hidden email]> wrote:
>>     https://github.com/renggli/builder/blob/master/scripts/petitparser.st
>>     https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>>
>> Things are mostly independent. To get a minimal setup only load
>> 'PetitParser'. Some parts of the PetitGui use 'PetitAnalizer', so you
>> probably want to load that too, but should not be a strict
>> requirement.
>>
>> Lukas
>>
>>
>> On 28 February 2012 18:35, Norbert Hartl <[hidden email]> wrote:
>>> Is there a way to load PetitGui with a smaller set of dependecies? Or is Magritte and Grease and etc. needed for the GUI? Loading PetitParser default loads default of Glamour, too. And that's quite a lot.
>>>
>>> thanks,
>>>
>>> Norbert
>>> _______________________________________________
>>> Moose-dev mailing list
>>> [hidden email]
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>>
>> --
>> Lukas Renggli
>> www.lukas-renggli.ch
>
>
>
> --
> Lukas Renggli
> www.lukas-renggli.ch
>
> _______________________________________________
> Moose-dev mailing list
> [hidden email]
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev

> On 28 Feb 2012, at 19:24, Lukas Renggli wrote:
>
>> Thank you for pointing out. Recent changes in Glamour broke my builds
>> too (http://jenkins.lukas-renggli.ch/job/PetitParser/). See the
>> updated load script for the fix:
>>
>>   https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>>
>> Lukas
>>
>> On 28 February 2012 18:55, Lukas Renggli <[hidden email]> wrote:
>>>    https://github.com/renggli/builder/blob/master/scripts/petitparser.st
>>>    https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>>>
>>> Things are mostly independent. To get a minimal setup only load
>>> 'PetitParser'. Some parts of the PetitGui use 'PetitAnalizer', so you
>>> probably want to load that too, but should not be a strict
>>> requirement.
>>>
>>> Lukas
>>>
>>>
>>> On 28 February 2012 18:35, Norbert Hartl <[hidden email]> wrote:
>>>> Is there a way to load PetitGui with a smaller set of dependecies? Or is Magritte and Grease and etc. needed for the GUI? Loading PetitParser default loads default of Glamour, too. And that's quite a lot.
>>>>
>>>> thanks,
>>>>
>>>> Norbert
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> [hidden email]
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>>
>>> --
>>> Lukas Renggli
>>> www.lukas-renggli.ch
>>
>>
>>
>> --
>> Lukas Renggli
>> www.lukas-renggli.ch
>>
>> _______________________________________________
>> Moose-dev mailing list
>> [hidden email]
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
> --
> www.tudorgirba.com
>
> "Being happy is a matter of choice."
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> [hidden email]
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev

>
> Am 28.02.2012 um 20:49 schrieb Tudor Girba:
>
>> I will update the configuration to load Glamour properly for Pharo 1.3, as well.
>>
>>
> thanks,
>
> Norbert
>
>> On 28 Feb 2012, at 19:24, Lukas Renggli wrote:
>>
>>> Thank you for pointing out. Recent changes in Glamour broke my builds
>>> too (http://jenkins.lukas-renggli.ch/job/PetitParser/). See the
>>> updated load script for the fix:
>>>
>>>  https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>>>
>>> Lukas
>>>
>>> On 28 February 2012 18:55, Lukas Renggli <[hidden email]> wrote:
>>>>   https://github.com/renggli/builder/blob/master/scripts/petitparser.st
>>>>   https://github.com/renggli/builder/blob/master/scripts/petitparser-gui.st
>>>>
>>>> Things are mostly independent. To get a minimal setup only load
>>>> 'PetitParser'. Some parts of the PetitGui use 'PetitAnalizer', so you
>>>> probably want to load that too, but should not be a strict
>>>> requirement.
>>>>
>>>> Lukas
>>>>
>>>>
>>>> On 28 February 2012 18:35, Norbert Hartl <[hidden email]> wrote:
>>>>> Is there a way to load PetitGui with a smaller set of dependecies? Or is Magritte and Grease and etc. needed for the GUI? Loading PetitParser default loads default of Glamour, too. And that's quite a lot.
>>>>>
>>>>> thanks,
>>>>>
>>>>> Norbert
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> [hidden email]
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>>
>>>> --
>>>> Lukas Renggli
>>>> www.lukas-renggli.ch
>>>
>>>
>>>
>>> --
>>> Lukas Renggli
>>> www.lukas-renggli.ch
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> [hidden email]
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>> --
>> www.tudorgirba.com
>>
>> "Being happy is a matter of choice."
>>
>>
>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> [hidden email]
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
> _______________________________________________
> Moose-dev mailing list
> [hidden email]
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev

>
> Norbert Hartl wrote
>>
>>> I will update the configuration to load Glamour properly for Pharo 1.3,
>>> as well.
>>
>
> Was this ever handled? I just tried to load Glamour into 1.3 and got the
> same PaginatedMorphTreeModel  dependency warning with:
>        Gofer new
>                squeaksource: 'Glamour';
>                package: 'ConfigurationOfGlamour';
>                load.
>        ((Smalltalk at: #ConfigurationOfGlamour) project version: 'default') load:
> {'Core'. 'Morphic'}.
>
> Thanks.
> Sean
>
> --
> View this message in context: http://forum.world.st/Load-PetitGui-with-minimal-dependency-tp4428888p4510627.html
> Sent from the Moose mailing list archive at Nabble.com.
> _______________________________________________
> Moose-dev mailing list
> [hidden email]
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev