Ciao,
i do some test for use Pier 3.0 into Gemstone 3.1.0.1 environment. I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems loaded properly. I can work with the Pier Admin Setup for create new pier instance: i configured two pier environment based one to Book Template and one to Blank Template. The *instance work fine. If i work with *instance-admin when i do the login the system answer: a Breakpoint occurred (error 6005), Method breakpoint encountered. - G/S[MonvisoGruppi:1 Seaside WalkbackMessageNotUnderstoodRemote Debug Proceed Full Stack Possible Causes
Stack Trace
The relative GemTools Debug record report : WAErrorHandler >> remoteBreakpointMethod (envId 0)
WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0)
WADebugErrorHandler >> debugAndResume: (envId 0)
WADebugErrorHandler >> handleDefault: (envId 0)
WAErrorHandler >> handleError: (envId 0)
WAErrorHandler >> handleGemStoneException: (envId 0)
WAGemStoneWalkbackErrorHandler >> handleException: (envId 0)
[] in WAExceptionHandler >> handleExceptionsDuring: (envId 0)
ExecBlock >> on:do: (envId 0)
[] in WAExceptionHandler >> handleExceptionsDuring: (envId 0)
[] in ExecBlock >> on:do: (envId 0)
AbstractException >> _executeHandler: (envId 0)
AbstractException >> _signalWith: (envId 0)
AbstractException >> signal (envId 0)
Object >> doesNotUnderstand: (envId 0)
Object >> _doesNotUnderstand:args:envId:reason: (envId 0)
Announcer >> subscribe:do: (envId 0)
Announcer >> on:do: (envId 0)
PRAdminNavigator >> announcementRegister (envId 0)
PRAdminAnnouncingComponent >> initialize (envId 0)
GRObject class >> new (envId 0)
PRAdminUIChild class >> contextGetCallback:contextSetCallback: (envId 0)
PRAdminUI >> navigatorComponent (envId 0)
PRAdminUI >> children (envId 0)
WAPresenter >> childrenDo: (envId 0)
WAVisiblePresenterGuide >> visitPresenter: (envId 0)
WAPainterVisitor >> visitComponent: (envId 0)
WAComponent >> accept: (envId 0)
WAVisiblePresenterGuide >> visitDecoration: (envId 0)
WADecoration >> accept: (envId 0)
WAPainterVisitor >> visitDecorationsOfComponent: (envId 0)
WAComponent >> acceptDecorated: (envId 0)
WAPresenterGuide >> visit: (envId 0)
[] in WAVisiblePresenterGuide >> visitPresenter: (envId 0)
[] in WAPresenter >> childrenDo: (envId 0)
Collection >> do: (envId 0)
WAPresenter >> childrenDo: (envId 0)
WAVisiblePresenterGuide >> visitPresenter: (envId 0)
WAPainterVisitor >> visitDecoration: (envId 0)
WAVisiblePresenterGuide >> visitDecoration: (envId 0)
WAPainterVisitor >> visitDelegation: (envId 0)
WADelegation >> accept: (envId 0)
WAPainterVisitor >> visitDecorationsOfComponent: (envId 0)
WAComponent >> acceptDecorated: (envId 0)
WAPresenterGuide >> visit: (envId 0)
WAVisitor >> start: (envId 0) Thanks for any suggestion, Dario _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Dario,
I'm trying to reproduce your issue and I don't know the adm password:( and got hung up ... there are a bunch of places to look, so I'm hoping someone tells me the default password before I eventually track it down... Dale ----- Original Message ----- | From: [hidden email] | To: "magritte-wiki" <[hidden email]> | Sent: Wednesday, September 26, 2012 7:36:16 AM | Subject: Manage Pier in Gemstone environment | | | Ciao, | | | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 environment. | | | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems loaded | properly. | | | | | I can work with the Pier Admin Setup for create new pier instance: | | | | i configured two pier environment based | | | one to Book Template | | | and one to Blank Template. | | The *instance work fine. | | | If i work with *instance-admin when i do the login the system answer: | | | | a Breakpoint occurred (error 6005), Method breakpoint encountered. - | G/S[MonvisoGruppi:1 | | | Seaside Walkback | MessageNotUnderstood | | | Remote Debug Proceed Full Stack Possible Causes | | | * you sent a message this type of object doesn't understand | | Stack Trace | | | 1. thisContext WAGemStoneWalkback >> currentContextForWalkback | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial nil | context nil .t1 GsContext .t2 1 | 2. thisContext WAGemStoneWalkback >> initializeWithException: | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback anException | a MessageNotUnderstood occurred (error 2010), a ExecBlock does | not understand #'receiver' context nil .t1 | aWARemoteDebuggingWalkback | 3. thisContext WARemoteDebuggingWalkback >> | initializeWithException:continuation: (envId 0) @2 line 3 self | aWARemoteDebuggingWalkback anException a MessageNotUnderstood | occurred (error 2010), a ExecBlock does not understand | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | 4. thisContext WARemoteDebuggingWalkback class >> | exception:continuation: (envId 0) @3 line 2 self | WARemoteDebuggingWalkback anException a MessageNotUnderstood | occurred (error 2010), a ExecBlock does not understand | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry nil | continuation GsProcess(oop=249109249, status=debug, priority=4, | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException a | MessageNotUnderstood occurred (error 2010), a ExecBlock does not | understand #'receiver' self | aWARemoteDebuggingWalkbackErrorHandler .t1 | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred | (error 2010), a ExecBlock does not understand #'receiver' .t3 | GsProcess(oop=249109249, status=debug, priority=4, | WARemoteDebuggingWalkbackErrorHandler >> open: ( | | | The relative GemTools Debug record report : | | | | | WAErrorHandler >> remoteBreakpointMethod (envId 0) | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) | WADebugErrorHandler >> debugAndResume: (envId 0) WADebugErrorHandler | >> handleDefault: (envId 0) WAErrorHandler >> handleError: (envId 0) | WAErrorHandler >> handleGemStoneException: (envId 0) | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) [] in | WAExceptionHandler >> handleExceptionsDuring: (envId 0) ExecBlock >> | on:do: (envId 0) [] in WAExceptionHandler >> handleExceptionsDuring: | (envId 0) [] in ExecBlock >> on:do: (envId 0) AbstractException >> | _executeHandler: (envId 0) AbstractException >> _signalWith: (envId | 0) AbstractException >> signal (envId 0) Object >> | doesNotUnderstand: (envId 0) Object >> | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) | PRAdminNavigator >> announcementRegister (envId 0) | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject class >> | new (envId 0) PRAdminUIChild class >> | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: (envId | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide >> | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> visit: | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: (envId 0) | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: (envId | 0) WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> | visitPresenter: (envId 0) WAPainterVisitor >> visitDecoration: | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId 0) | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation >> | accept: (envId 0) WAPainterVisitor >> visitDecorationsOfComponent: | (envId 0) WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide | >> visit: (envId 0) WAVisitor >> start: (envId 0) | | | | | Thanks for any suggestion, | | | | | Dario | | _______________________________________________ | Magritte, Pier and Related Tools ... | https://www.iam.unibe.ch/mailman/listinfo/smallwiki _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Dale, > Dario, > > I'm trying to reproduce your issue and I don't know the adm password: > ( and got hung up ... there are a bunch of places to look, so I'm hoping someone tells me the default password before I eventually track it down... > > Dale > > ----- Original Message ----- > | From: [hidden email] > | To: "magritte-wiki" <[hidden email]> > | Sent: Wednesday, September 26, 2012 7:36:16 AM > | Subject: Manage Pier in Gemstone environment > | > | > | Ciao, > | > | > | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 environment. > | > | > | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems loaded > | properly. > | > | > | > | > | I can work with the Pier Admin Setup for create new pier instance: > | > | > | > | i configured two pier environment based > | > | > | one to Book Template > | > | > | and one to Blank Template. > | > | The *instance work fine. > | > | > | If i work with *instance-admin when i do the login the system answer: > | > | > | > | a Breakpoint occurred (error 6005), Method breakpoint encountered. - > | G/S[MonvisoGruppi:1 > | > | > | Seaside Walkback > | MessageNotUnderstood > | > | > | Remote Debug Proceed Full Stack Possible Causes > | > | > | * you sent a message this type of object doesn't understand > | > | Stack Trace > | > | > | 1. thisContext WAGemStoneWalkback >> currentContextForWalkback > | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial nil > | context nil .t1 GsContext .t2 1 > | 2. thisContext WAGemStoneWalkback >> initializeWithException: > | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback anException > | a MessageNotUnderstood occurred (error 2010), a ExecBlock does > | not understand #'receiver' context nil .t1 > | aWARemoteDebuggingWalkback > | 3. thisContext WARemoteDebuggingWalkback >> > | initializeWithException:continuation: (envId 0) @2 line 3 self > | aWARemoteDebuggingWalkback anException a MessageNotUnderstood > | occurred (error 2010), a ExecBlock does not understand > | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( > | 4. thisContext WARemoteDebuggingWalkback class >> > | exception:continuation: (envId 0) @3 line 2 self > | WARemoteDebuggingWalkback anException a MessageNotUnderstood > | occurred (error 2010), a ExecBlock does not understand > | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( > | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> > | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry nil > | continuation GsProcess(oop=249109249, status=debug, priority=4, > | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException a > | MessageNotUnderstood occurred (error 2010), a ExecBlock does not > | understand #'receiver' self > | aWARemoteDebuggingWalkbackErrorHandler .t1 > | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred > | (error 2010), a ExecBlock does not understand #'receiver' .t3 > | GsProcess(oop=249109249, status=debug, priority=4, > | WARemoteDebuggingWalkbackErrorHandler >> open: ( > | > | > | The relative GemTools Debug record report : > | > | > | > | > | WAErrorHandler >> remoteBreakpointMethod (envId 0) > | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) > | WADebugErrorHandler >> debugAndResume: (envId 0) WADebugErrorHandler > | >> handleDefault: (envId 0) WAErrorHandler >> handleError: (envId 0) > | WAErrorHandler >> handleGemStoneException: (envId 0) > | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) [] in > | WAExceptionHandler >> handleExceptionsDuring: (envId 0) ExecBlock >> > | on:do: (envId 0) [] in WAExceptionHandler >> handleExceptionsDuring: > | (envId 0) [] in ExecBlock >> on:do: (envId 0) AbstractException >> > | _executeHandler: (envId 0) AbstractException >> _signalWith: (envId > | 0) AbstractException >> signal (envId 0) Object >> > | doesNotUnderstand: (envId 0) Object >> > | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> > | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) > | PRAdminNavigator >> announcementRegister (envId 0) > | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject class >> > | new (envId 0) PRAdminUIChild class >> > | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> > | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) > | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> > | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: (envId > | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide >> > | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) > | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) > | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> visit: > | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: (envId 0) > | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: (envId > | 0) WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> > | visitPresenter: (envId 0) WAPainterVisitor >> visitDecoration: > | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId 0) > | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation >> > | accept: (envId 0) WAPainterVisitor >> visitDecorationsOfComponent: > | (envId 0) WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide > | >> visit: (envId 0) WAVisitor >> start: (envId 0) > | > | > | > | > | Thanks for any suggestion, > | > | > | > | > | Dario > | > | _______________________________________________ > | Magritte, Pier and Related Tools ... > | https://www.iam.unibe.ch/mailman/listinfo/smallwiki > _______________________________________________ > Magritte, Pier and Related Tools ... > https://www.iam.unibe.ch/mailman/listinfo/smallwiki _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
In reply to this post by Dale Henrichs
Dale,
> Dario, > > I'm trying to reproduce your issue and I don't know the adm password: What password you need ? ( The default pier user is admin with : pier as password ) The piersetup WAEntry don't required login. > ( and got hung up ... there are a bunch of places to look, so I'm hoping someone tells me the default password before I eventually track it down... > > Dale > > ----- Original Message ----- > | From: [hidden email] > | To: "magritte-wiki" <[hidden email]> > | Sent: Wednesday, September 26, 2012 7:36:16 AM > | Subject: Manage Pier in Gemstone environment > | > | > | Ciao, > | > | > | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 environment. > | > | > | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems loaded > | properly. > | > With it you can : > | > | > | I can work with the Pier Admin Setup for create new pier instance: > | > | > | > | i configured two pier environment based > | > | > | one to Book Template > | > | > | and one to Blank Template. > | > | The *instance work fine. > | > | Following is the problem: > | If i work with *instance-admin when i do the login the system answer: > | > | > | > | a Breakpoint occurred (error 6005), Method breakpoint encountered. - > | G/S[MonvisoGruppi:1 > | > | > | Seaside Walkback > | MessageNotUnderstood > | > | > | Remote Debug Proceed Full Stack Possible Causes > | > | > | * you sent a message this type of object doesn't understand > | > | Stack Trace > | > | > | 1. thisContext WAGemStoneWalkback >> currentContextForWalkback > | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial nil > | context nil .t1 GsContext .t2 1 > | 2. thisContext WAGemStoneWalkback >> initializeWithException: > | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback anException > | a MessageNotUnderstood occurred (error 2010), a ExecBlock does > | not understand #'receiver' context nil .t1 > | aWARemoteDebuggingWalkback > | 3. thisContext WARemoteDebuggingWalkback >> > | initializeWithException:continuation: (envId 0) @2 line 3 self > | aWARemoteDebuggingWalkback anException a MessageNotUnderstood > | occurred (error 2010), a ExecBlock does not understand > | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( > | 4. thisContext WARemoteDebuggingWalkback class >> > | exception:continuation: (envId 0) @3 line 2 self > | WARemoteDebuggingWalkback anException a MessageNotUnderstood > | occurred (error 2010), a ExecBlock does not understand > | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( > | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> > | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry nil > | continuation GsProcess(oop=249109249, status=debug, priority=4, > | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException a > | MessageNotUnderstood occurred (error 2010), a ExecBlock does not > | understand #'receiver' self > | aWARemoteDebuggingWalkbackErrorHandler .t1 > | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred > | (error 2010), a ExecBlock does not understand #'receiver' .t3 > | GsProcess(oop=249109249, status=debug, priority=4, > | WARemoteDebuggingWalkbackErrorHandler >> open: ( > | > | > | The relative GemTools Debug record report : > | > | > | > | > | WAErrorHandler >> remoteBreakpointMethod (envId 0) > | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) > | WADebugErrorHandler >> debugAndResume: (envId 0) WADebugErrorHandler > | >> handleDefault: (envId 0) WAErrorHandler >> handleError: (envId 0) > | WAErrorHandler >> handleGemStoneException: (envId 0) > | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) [] in > | WAExceptionHandler >> handleExceptionsDuring: (envId 0) ExecBlock >> > | on:do: (envId 0) [] in WAExceptionHandler >> handleExceptionsDuring: > | (envId 0) [] in ExecBlock >> on:do: (envId 0) AbstractException >> > | _executeHandler: (envId 0) AbstractException >> _signalWith: (envId > | 0) AbstractException >> signal (envId 0) Object >> > | doesNotUnderstand: (envId 0) Object >> > | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> > | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) > | PRAdminNavigator >> announcementRegister (envId 0) > | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject class >> > | new (envId 0) PRAdminUIChild class >> > | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> > | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) > | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> > | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: (envId > | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide >> > | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) > | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) > | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> visit: > | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: (envId 0) > | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: (envId > | 0) WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> > | visitPresenter: (envId 0) WAPainterVisitor >> visitDecoration: > | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId 0) > | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation >> > | accept: (envId 0) WAPainterVisitor >> visitDecorationsOfComponent: > | (envId 0) WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide > | >> visit: (envId 0) WAVisitor >> start: (envId 0) > | > | > | > | > | Thanks for any suggestion, > | > | > | > | > | Dario > | > | _______________________________________________ > | Magritte, Pier and Related Tools ... > | https://www.iam.unibe.ch/mailman/listinfo/smallwiki > _______________________________________________ > Magritte, Pier and Related Tools ... > https://www.iam.unibe.ch/mailman/listinfo/smallwiki _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
When I tried to use the book template to produce a kernel instance I was prompted for a username/password...I tried the usual suspects (I could swear I tried adm/pier first)...
I guess the next question is "What code do I execute to reset the password?"...It's been quite a while since I've spelunked around in the Pier code...I guess that's what I will have to do to figure this out ... Dale ----- Original Message ----- | From: [hidden email] | To: "Pier and Related Tools Magritte ..." <[hidden email]> | Sent: Friday, September 28, 2012 2:05:51 AM | Subject: Re: Manage Pier in Gemstone environment | | Dale, | | | > Dario, | > | > I'm trying to reproduce your issue and I don't know the adm | > password: | | What password you need ? | | ( The default pier user is admin with : pier as password ) | | The piersetup WAEntry don't required login. | | | > ( and got hung up ... there are a bunch of places to look, so I'm | > hoping someone tells me the default password before I eventually | > track it down... | > | > Dale | > | > ----- Original Message ----- | > | From: [hidden email] | > | To: "magritte-wiki" <[hidden email]> | > | Sent: Wednesday, September 26, 2012 7:36:16 AM | > | Subject: Manage Pier in Gemstone environment | > | | > | | > | Ciao, | > | | > | | > | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 | > | environment. | > | | > | | > | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems | > | loaded | > | properly. | > | | > | | With it you can : | | > | | > | | > | I can work with the Pier Admin Setup for create new pier | > | instance: | > | | > | | > | | > | i configured two pier environment based | > | | > | | > | one to Book Template | > | | > | | > | and one to Blank Template. | > | | > | The *instance work fine. | > | | > | | | Following is the problem: | | | > | If i work with *instance-admin when i do the login the system | > | answer: | > | | > | | > | | > | a Breakpoint occurred (error 6005), Method breakpoint | > | encountered. - | > | G/S[MonvisoGruppi:1 | > | | > | | > | Seaside Walkback | > | MessageNotUnderstood | > | | > | | > | Remote Debug Proceed Full Stack Possible Causes | > | | > | | > | * you sent a message this type of object doesn't understand | > | | > | Stack Trace | > | | > | | > | 1. thisContext WAGemStoneWalkback >> | > | currentContextForWalkback | > | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial | > | nil | > | context nil .t1 GsContext .t2 1 | > | 2. thisContext WAGemStoneWalkback >> initializeWithException: | > | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback | > | anException | > | a MessageNotUnderstood occurred (error 2010), a ExecBlock | > | does | > | not understand #'receiver' context nil .t1 | > | aWARemoteDebuggingWalkback | > | 3. thisContext WARemoteDebuggingWalkback >> | > | initializeWithException:continuation: (envId 0) @2 line 3 | > | self | > | aWARemoteDebuggingWalkback anException a MessageNotUnderstood | > | occurred (error 2010), a ExecBlock does not understand | > | #'receiver' aContinuation GsProcess(oop=249109249, | > | status=debug, | > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | > | 4. thisContext WARemoteDebuggingWalkback class >> | > | exception:continuation: (envId 0) @3 line 2 self | > | WARemoteDebuggingWalkback anException a MessageNotUnderstood | > | occurred (error 2010), a ExecBlock does not understand | > | #'receiver' aContinuation GsProcess(oop=249109249, | > | status=debug, | > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | > | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> | > | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry | > | nil | > | continuation GsProcess(oop=249109249, status=debug, | > | priority=4, | > | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException | > | a | > | MessageNotUnderstood occurred (error 2010), a ExecBlock does | > | not | > | understand #'receiver' self | > | aWARemoteDebuggingWalkbackErrorHandler .t1 | > | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred | > | (error 2010), a ExecBlock does not understand #'receiver' .t3 | > | GsProcess(oop=249109249, status=debug, priority=4, | > | WARemoteDebuggingWalkbackErrorHandler >> open: ( | > | | > | | > | The relative GemTools Debug record report : | > | | > | | > | | > | | > | WAErrorHandler >> remoteBreakpointMethod (envId 0) | > | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) | > | WADebugErrorHandler >> debugAndResume: (envId 0) | > | WADebugErrorHandler | > | >> handleDefault: (envId 0) WAErrorHandler >> handleError: (envId | > | >> 0) | > | WAErrorHandler >> handleGemStoneException: (envId 0) | > | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) [] | > | in | > | WAExceptionHandler >> handleExceptionsDuring: (envId 0) ExecBlock | > | >> | > | on:do: (envId 0) [] in WAExceptionHandler >> | > | handleExceptionsDuring: | > | (envId 0) [] in ExecBlock >> on:do: (envId 0) AbstractException | > | >> | > | _executeHandler: (envId 0) AbstractException >> _signalWith: | > | (envId | > | 0) AbstractException >> signal (envId 0) Object >> | > | doesNotUnderstand: (envId 0) Object >> | > | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> | > | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) | > | PRAdminNavigator >> announcementRegister (envId 0) | > | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject class | > | >> | > | new (envId 0) PRAdminUIChild class >> | > | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> | > | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) | > | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> | > | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: | > | (envId | > | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide >> | > | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) | > | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) | > | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> | > | visit: | > | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: (envId | > | 0) | > | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: | > | (envId | > | 0) WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide | > | >> | > | visitPresenter: (envId 0) WAPainterVisitor >> visitDecoration: | > | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId 0) | > | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation >> | > | accept: (envId 0) WAPainterVisitor >> | > | visitDecorationsOfComponent: | > | (envId 0) WAComponent >> acceptDecorated: (envId 0) | > | WAPresenterGuide | > | >> visit: (envId 0) WAVisitor >> start: (envId 0) | > | | > | | > | | > | | > | Thanks for any suggestion, | > | | > | | > | | > | | > | Dario | > | | > | _______________________________________________ | > | Magritte, Pier and Related Tools ... | > | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | > _______________________________________________ | > Magritte, Pier and Related Tools ... | > https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | _______________________________________________ | Magritte, Pier and Related Tools ... | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Dale,
a this time: Create kernel from template with my system i can define my personal user. The system display You have selected: Blog Template What your system display ? Thank, Dario
_______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Hi Dale,
As Dario indicates, Pier-Admin-Setup allows you to create your own username/password pair - there is no default username password - that is if you browse to /piersetup I've been away for a week so am just catching up with my emails - apologies for the delay in replying
Cheers Nick
On 28 September 2012 17:15, [hidden email] <[hidden email]> wrote:
_______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Dale,Â
For the forgotten password, you can inspect the PUUser and *change* the password using password := GRPlatform current secureHashFor: yourNewPassword.
I have had to do that a time or two =) On Sun, Sep 30, 2012 at 4:09 PM, Nick Ager <[hidden email]> wrote: Hi Dale, jmck.seasidehosting.st _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Hello. If you have more than one kernel instance in the image (blog, book, ...), you can have more than one user admin in the image. For that, you can ask the kernel instance the admin user directly (I guess that is the purpose) using #adminUser :
(PRKernel instanceNamed: 'Blog Template') adminUser password: 'newPass'. I not only forget the password, the name of kernel instance too!! To see them inspected first: PRKernel instances. My 2c. Regards. 2012/9/30 John McKeon <[hidden email]> Dale, _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
In reply to this post by Nick
I can only say that I was _prevented_ from adding the template because I didn't supply the correct password...
Dale ----- Original Message ----- | From: "Nick Ager" <[hidden email]> | To: "Pier and Related Tools Magritte ..." <[hidden email]> | Sent: Sunday, September 30, 2012 1:09:39 PM | Subject: Re: Manage Pier in Gemstone environment | | | Hi Dale, | | | As Dario indicates, Pier-Admin-Setup allows you to create your own | username/password pair - there is no default username password - | that is if you browse to /piersetup | | | I've been away for a week so am just catching up with my emails - | apologies for the delay in replying | | | Cheers | | | Nick | | | On 28 September 2012 17:15, [hidden email] < | [hidden email] > wrote: | | | | Dale, | | | | | | | | | | When I tried to use the book template to produce a kernel instance I | was prompted for a username/password...I tried the usual suspects (I | could swear I tried adm/pier first)... | | | | | | a this time: Create kernel from template | | | with my system i can define my personal user. | | | The system display | | | | You have selected: Blog Template | Create an admin user | Name: | | Password: | | | Input is required but no input given | Register admin user | What your system display ? | | | Thank, | | | Dario | | | | | | | | | I guess the next question is "What code do I execute to reset the | password?"...It's been quite a while since I've spelunked around in | the Pier code...I guess that's what I will have to do to figure this | out ... | | Dale | | ----- Original Message ----- | | From: [hidden email] | | To: "Pier and Related Tools Magritte ..." < [hidden email] | | > | | Sent: Friday, September 28, 2012 2:05:51 AM | | Subject: Re: Manage Pier in Gemstone environment | | | | Dale, | | | | | | > Dario, | | > | | > I'm trying to reproduce your issue and I don't know the adm | | > password: | | | | What password you need ? | | | | ( The default pier user is admin with : pier as password ) | | | | The piersetup WAEntry don't required login. | | | | | | > ( and got hung up ... there are a bunch of places to look, so I'm | | > hoping someone tells me the default password before I eventually | | > track it down... | | > | | > Dale | | > | | > ----- Original Message ----- | | > | From: [hidden email] | | > | To: "magritte-wiki" < [hidden email] > | | > | Sent: Wednesday, September 26, 2012 7:36:16 AM | | > | Subject: Manage Pier in Gemstone environment | | > | | | > | | | > | Ciao, | | > | | | > | | | > | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 | | > | environment. | | > | | | > | | | > | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems | | > | loaded | | > | properly. | | > | | | > | | | | With it you can : | | | | > | | | > | | | > | I can work with the Pier Admin Setup for create new pier | | > | instance: | | > | | | > | | | > | | | > | i configured two pier environment based | | > | | | > | | | > | one to Book Template | | > | | | > | | | > | and one to Blank Template. | | > | | | > | The *instance work fine. | | > | | | > | | | | | Following is the problem: | | | | | | > | If i work with *instance-admin when i do the login the system | | > | answer: | | > | | | > | | | > | | | > | a Breakpoint occurred (error 6005), Method breakpoint | | > | encountered. - | | > | G/S[MonvisoGruppi:1 | | > | | | > | | | > | Seaside Walkback | | > | MessageNotUnderstood | | > | | | > | | | > | Remote Debug Proceed Full Stack Possible Causes | | > | | | > | | | > | * you sent a message this type of object doesn't understand | | > | | | > | Stack Trace | | > | | | > | | | > | 1. thisContext WAGemStoneWalkback >> | | > | currentContextForWalkback | | > | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial | | > | nil | | > | context nil .t1 GsContext .t2 1 | | > | 2. thisContext WAGemStoneWalkback >> initializeWithException: | | > | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback | | > | anException | | > | a MessageNotUnderstood occurred (error 2010), a ExecBlock | | > | does | | > | not understand #'receiver' context nil .t1 | | > | aWARemoteDebuggingWalkback | | > | 3. thisContext WARemoteDebuggingWalkback >> | | > | initializeWithException:continuation: (envId 0) @2 line 3 | | > | self | | > | aWARemoteDebuggingWalkback anException a MessageNotUnderstood | | > | occurred (error 2010), a ExecBlock does not understand | | > | #'receiver' aContinuation GsProcess(oop=249109249, | | > | status=debug, | | > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | | > | 4. thisContext WARemoteDebuggingWalkback class >> | | > | exception:continuation: (envId 0) @3 line 2 self | | > | WARemoteDebuggingWalkback anException a MessageNotUnderstood | | > | occurred (error 2010), a ExecBlock does not understand | | > | #'receiver' aContinuation GsProcess(oop=249109249, | | > | status=debug, | | > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | | > | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> | | > | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry | | > | nil | | > | continuation GsProcess(oop=249109249, status=debug, | | > | priority=4, | | > | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException | | > | a | | > | MessageNotUnderstood occurred (error 2010), a ExecBlock does | | > | not | | > | understand #'receiver' self | | > | aWARemoteDebuggingWalkbackErrorHandler .t1 | | > | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred | | > | (error 2010), a ExecBlock does not understand #'receiver' .t3 | | > | GsProcess(oop=249109249, status=debug, priority=4, | | > | WARemoteDebuggingWalkbackErrorHandler >> open: ( | | > | | | > | | | > | The relative GemTools Debug record report : | | > | | | > | | | > | | | > | | | > | WAErrorHandler >> remoteBreakpointMethod (envId 0) | | > | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) | | > | WADebugErrorHandler >> debugAndResume: (envId 0) | | > | WADebugErrorHandler | | > | >> handleDefault: (envId 0) WAErrorHandler >> handleError: | | > | >> (envId | | > | >> 0) | | > | WAErrorHandler >> handleGemStoneException: (envId 0) | | > | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) [] | | > | in | | > | WAExceptionHandler >> handleExceptionsDuring: (envId 0) | | > | ExecBlock | | > | >> | | > | on:do: (envId 0) [] in WAExceptionHandler >> | | > | handleExceptionsDuring: | | > | (envId 0) [] in ExecBlock >> on:do: (envId 0) AbstractException | | > | >> | | > | _executeHandler: (envId 0) AbstractException >> _signalWith: | | > | (envId | | > | 0) AbstractException >> signal (envId 0) Object >> | | > | doesNotUnderstand: (envId 0) Object >> | | > | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> | | > | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) | | > | PRAdminNavigator >> announcementRegister (envId 0) | | > | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject | | > | class | | > | >> | | > | new (envId 0) PRAdminUIChild class >> | | > | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> | | > | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) | | > | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> | | > | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: | | > | (envId | | > | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide >> | | > | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) | | > | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) | | > | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> | | > | visit: | | > | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: | | > | (envId | | > | 0) | | > | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: | | > | (envId | | > | 0) WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide | | > | >> | | > | visitPresenter: (envId 0) WAPainterVisitor >> visitDecoration: | | > | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId 0) | | > | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation >> | | > | accept: (envId 0) WAPainterVisitor >> | | > | visitDecorationsOfComponent: | | > | (envId 0) WAComponent >> acceptDecorated: (envId 0) | | > | WAPresenterGuide | | > | >> visit: (envId 0) WAVisitor >> start: (envId 0) | | > | | | > | | | > | | | > | | | > | Thanks for any suggestion, | | > | | | > | | | > | | | > | | | > | Dario | | > | | | > | _______________________________________________ | | > | Magritte, Pier and Related Tools ... | | > | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | > _______________________________________________ | | > Magritte, Pier and Related Tools ... | | > https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | | | | _______________________________________________ | | Magritte, Pier and Related Tools ... | | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | _______________________________________________ | Magritte, Pier and Related Tools ... | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | _______________________________________________ | Magritte, Pier and Related Tools ... | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | _______________________________________________ | Magritte, Pier and Related Tools ... | https://www.iam.unibe.ch/mailman/listinfo/smallwiki _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Now that I come back to the problem ... I interpretted the "Your passwords do not match" as being denied a login ... and I thought I needed to login to create the user ...
Ah well, at least now I'm past that problem:) Dale ----- Original Message ----- | From: "Dale Henrichs" <[hidden email]> | To: "Pier and Related Tools Magritte ..." <[hidden email]> | Sent: Monday, October 1, 2012 2:45:28 PM | Subject: Re: Manage Pier in Gemstone environment | | I can only say that I was _prevented_ from adding the template | because I didn't supply the correct password... | | Dale | | ----- Original Message ----- | | From: "Nick Ager" <[hidden email]> | | To: "Pier and Related Tools Magritte ..." <[hidden email]> | | Sent: Sunday, September 30, 2012 1:09:39 PM | | Subject: Re: Manage Pier in Gemstone environment | | | | | | Hi Dale, | | | | | | As Dario indicates, Pier-Admin-Setup allows you to create your own | | username/password pair - there is no default username password - | | that is if you browse to /piersetup | | | | | | I've been away for a week so am just catching up with my emails - | | apologies for the delay in replying | | | | | | Cheers | | | | | | Nick | | | | | | On 28 September 2012 17:15, [hidden email] < | | [hidden email] > wrote: | | | | | | | | Dale, | | | | | | | | | | | | | | | | | | | | When I tried to use the book template to produce a kernel instance | | I | | was prompted for a username/password...I tried the usual suspects | | (I | | could swear I tried adm/pier first)... | | | | | | | | | | | | a this time: Create kernel from template | | | | | | with my system i can define my personal user. | | | | | | The system display | | | | | | | | You have selected: Blog Template | | Create an admin user | | Name: | | | | Password: | | | | | | Input is required but no input given | | Register admin user | | What your system display ? | | | | | | Thank, | | | | | | Dario | | | | | | | | | | | | | | | | | | I guess the next question is "What code do I execute to reset the | | password?"...It's been quite a while since I've spelunked around in | | the Pier code...I guess that's what I will have to do to figure | | this | | out ... | | | | Dale | | | | ----- Original Message ----- | | | From: [hidden email] | | | To: "Pier and Related Tools Magritte ..." < | | | [hidden email] | | | > | | | Sent: Friday, September 28, 2012 2:05:51 AM | | | Subject: Re: Manage Pier in Gemstone environment | | | | | | Dale, | | | | | | | | | > Dario, | | | > | | | > I'm trying to reproduce your issue and I don't know the adm | | | > password: | | | | | | What password you need ? | | | | | | ( The default pier user is admin with : pier as password ) | | | | | | The piersetup WAEntry don't required login. | | | | | | | | | > ( and got hung up ... there are a bunch of places to look, so | | | > I'm | | | > hoping someone tells me the default password before I | | | > eventually | | | > track it down... | | | > | | | > Dale | | | > | | | > ----- Original Message ----- | | | > | From: [hidden email] | | | > | To: "magritte-wiki" < [hidden email] > | | | > | Sent: Wednesday, September 26, 2012 7:36:16 AM | | | > | Subject: Manage Pier in Gemstone environment | | | > | | | | > | | | | > | Ciao, | | | > | | | | > | | | | > | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 | | | > | environment. | | | > | | | | > | | | | > | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems | | | > | loaded | | | > | properly. | | | > | | | | > | | | | | | With it you can : | | | | | | > | | | | > | | | | > | I can work with the Pier Admin Setup for create new pier | | | > | instance: | | | > | | | | > | | | | > | | | | > | i configured two pier environment based | | | > | | | | > | | | | > | one to Book Template | | | > | | | | > | | | | > | and one to Blank Template. | | | > | | | | > | The *instance work fine. | | | > | | | | > | | | | | | | Following is the problem: | | | | | | | | | > | If i work with *instance-admin when i do the login the system | | | > | answer: | | | > | | | | > | | | | > | | | | > | a Breakpoint occurred (error 6005), Method breakpoint | | | > | encountered. - | | | > | G/S[MonvisoGruppi:1 | | | > | | | | > | | | | > | Seaside Walkback | | | > | MessageNotUnderstood | | | > | | | | > | | | | > | Remote Debug Proceed Full Stack Possible Causes | | | > | | | | > | | | | > | * you sent a message this type of object doesn't understand | | | > | | | | > | Stack Trace | | | > | | | | > | | | | > | 1. thisContext WAGemStoneWalkback >> | | | > | currentContextForWalkback | | | > | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial | | | > | nil | | | > | context nil .t1 GsContext .t2 1 | | | > | 2. thisContext WAGemStoneWalkback >> initializeWithException: | | | > | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback | | | > | anException | | | > | a MessageNotUnderstood occurred (error 2010), a ExecBlock | | | > | does | | | > | not understand #'receiver' context nil .t1 | | | > | aWARemoteDebuggingWalkback | | | > | 3. thisContext WARemoteDebuggingWalkback >> | | | > | initializeWithException:continuation: (envId 0) @2 line 3 | | | > | self | | | > | aWARemoteDebuggingWalkback anException a MessageNotUnderstood | | | > | occurred (error 2010), a ExecBlock does not understand | | | > | #'receiver' aContinuation GsProcess(oop=249109249, | | | > | status=debug, | | | > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | | | > | 4. thisContext WARemoteDebuggingWalkback class >> | | | > | exception:continuation: (envId 0) @3 line 2 self | | | > | WARemoteDebuggingWalkback anException a MessageNotUnderstood | | | > | occurred (error 2010), a ExecBlock does not understand | | | > | #'receiver' aContinuation GsProcess(oop=249109249, | | | > | status=debug, | | | > | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | | | > | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> | | | > | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry | | | > | nil | | | > | continuation GsProcess(oop=249109249, status=debug, | | | > | priority=4, | | | > | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException | | | > | a | | | > | MessageNotUnderstood occurred (error 2010), a ExecBlock does | | | > | not | | | > | understand #'receiver' self | | | > | aWARemoteDebuggingWalkbackErrorHandler .t1 | | | > | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred | | | > | (error 2010), a ExecBlock does not understand #'receiver' .t3 | | | > | GsProcess(oop=249109249, status=debug, priority=4, | | | > | WARemoteDebuggingWalkbackErrorHandler >> open: ( | | | > | | | | > | | | | > | The relative GemTools Debug record report : | | | > | | | | > | | | | > | | | | > | | | | > | WAErrorHandler >> remoteBreakpointMethod (envId 0) | | | > | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) | | | > | WADebugErrorHandler >> debugAndResume: (envId 0) | | | > | WADebugErrorHandler | | | > | >> handleDefault: (envId 0) WAErrorHandler >> handleError: | | | > | >> (envId | | | > | >> 0) | | | > | WAErrorHandler >> handleGemStoneException: (envId 0) | | | > | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) | | | > | [] | | | > | in | | | > | WAExceptionHandler >> handleExceptionsDuring: (envId 0) | | | > | ExecBlock | | | > | >> | | | > | on:do: (envId 0) [] in WAExceptionHandler >> | | | > | handleExceptionsDuring: | | | > | (envId 0) [] in ExecBlock >> on:do: (envId 0) | | | > | AbstractException | | | > | >> | | | > | _executeHandler: (envId 0) AbstractException >> _signalWith: | | | > | (envId | | | > | 0) AbstractException >> signal (envId 0) Object >> | | | > | doesNotUnderstand: (envId 0) Object >> | | | > | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> | | | > | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) | | | > | PRAdminNavigator >> announcementRegister (envId 0) | | | > | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject | | | > | class | | | > | >> | | | > | new (envId 0) PRAdminUIChild class >> | | | > | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> | | | > | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) | | | > | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide | | | > | >> | | | > | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: | | | > | (envId | | | > | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide | | | > | >> | | | > | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) | | | > | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) | | | > | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> | | | > | visit: | | | > | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: | | | > | (envId | | | > | 0) | | | > | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: | | | > | (envId | | | > | 0) WAPresenter >> childrenDo: (envId 0) | | | > | WAVisiblePresenterGuide | | | > | >> | | | > | visitPresenter: (envId 0) WAPainterVisitor >> | | | > | visitDecoration: | | | > | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId | | | > | 0) | | | > | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation | | | > | >> | | | > | accept: (envId 0) WAPainterVisitor >> | | | > | visitDecorationsOfComponent: | | | > | (envId 0) WAComponent >> acceptDecorated: (envId 0) | | | > | WAPresenterGuide | | | > | >> visit: (envId 0) WAVisitor >> start: (envId 0) | | | > | | | | > | | | | > | | | | > | | | | > | Thanks for any suggestion, | | | > | | | | > | | | | > | | | | > | | | | > | Dario | | | > | | | | > | _______________________________________________ | | | > | Magritte, Pier and Related Tools ... | | | > | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | > _______________________________________________ | | | > Magritte, Pier and Related Tools ... | | | > https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | | | | | | | _______________________________________________ | | | Magritte, Pier and Related Tools ... | | | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | | | _______________________________________________ | | Magritte, Pier and Related Tools ... | | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | | | | _______________________________________________ | | Magritte, Pier and Related Tools ... | | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | | | | | | _______________________________________________ | | Magritte, Pier and Related Tools ... | | https://www.iam.unibe.ch/mailman/listinfo/smallwiki | _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
In reply to this post by dtrussardi@tiscali.it
Dario,
This issue[1] is now fixed ... The fix will be included in the upcoming GLASS 1.0-beta.9 release, butit should be safe to load Announcements.v3-dkh.18 from http://seaside.gemstone.com/ss/announcements... Dale [1] http://code.google.com/p/glassdb/issues/detail?id=351 ----- Original Message ----- | From: [hidden email] | To: "magritte-wiki" <[hidden email]> | Sent: Wednesday, September 26, 2012 7:36:16 AM | Subject: Manage Pier in Gemstone environment | | | Ciao, | | | i do some test for use Pier 3.0 into Gemstone 3.1.0.1 environment. | | | I load the 3.0.3 [ConfigurationOfPier3AddOns] and all seems loaded | properly. | | | | | I can work with the Pier Admin Setup for create new pier instance: | | | | i configured two pier environment based | | | one to Book Template | | | and one to Blank Template. | | The *instance work fine. | | | If i work with *instance-admin when i do the login the system answer: | | | | a Breakpoint occurred (error 6005), Method breakpoint encountered. - | G/S[MonvisoGruppi:1 | | | Seaside Walkback | MessageNotUnderstood | | | Remote Debug Proceed Full Stack Possible Causes | | | * you sent a message this type of object doesn't understand | | Stack Trace | | | 1. thisContext WAGemStoneWalkback >> currentContextForWalkback | (envId 0) @2 line 3 self aWARemoteDebuggingWalkback initial nil | context nil .t1 GsContext .t2 1 | 2. thisContext WAGemStoneWalkback >> initializeWithException: | (envId 0) @3 line 4 self aWARemoteDebuggingWalkback anException | a MessageNotUnderstood occurred (error 2010), a ExecBlock does | not understand #'receiver' context nil .t1 | aWARemoteDebuggingWalkback | 3. thisContext WARemoteDebuggingWalkback >> | initializeWithException:continuation: (envId 0) @2 line 3 self | aWARemoteDebuggingWalkback anException a MessageNotUnderstood | occurred (error 2010), a ExecBlock does not understand | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | 4. thisContext WARemoteDebuggingWalkback class >> | exception:continuation: (envId 0) @3 line 2 self | WARemoteDebuggingWalkback anException a MessageNotUnderstood | occurred (error 2010), a ExecBlock does not understand | #'receiver' aContinuation GsProcess(oop=249109249, status=debug, | priority=4, WARemoteDebuggingWalkbackErrorHandler >> open: ( | 5. thisContext [] in WARemoteDebuggingWalkbackErrorHandler >> | open: (envId 0) @18 line 27 self anExecBlock wb nil logEntry nil | continuation GsProcess(oop=249109249, status=debug, priority=4, | WARemoteDebuggingWalkbackErrorHandler >> open: ( anException a | MessageNotUnderstood occurred (error 2010), a ExecBlock does not | understand #'receiver' self | aWARemoteDebuggingWalkbackErrorHandler .t1 | WARemoteDebuggingWalkback .t2 a MessageNotUnderstood occurred | (error 2010), a ExecBlock does not understand #'receiver' .t3 | GsProcess(oop=249109249, status=debug, priority=4, | WARemoteDebuggingWalkbackErrorHandler >> open: ( | | | The relative GemTools Debug record report : | | | | | WAErrorHandler >> remoteBreakpointMethod (envId 0) | WARemoteDebuggingWalkbackErrorHandler >> open: (envId 0) | WADebugErrorHandler >> debugAndResume: (envId 0) WADebugErrorHandler | >> handleDefault: (envId 0) WAErrorHandler >> handleError: (envId 0) | WAErrorHandler >> handleGemStoneException: (envId 0) | WAGemStoneWalkbackErrorHandler >> handleException: (envId 0) [] in | WAExceptionHandler >> handleExceptionsDuring: (envId 0) ExecBlock >> | on:do: (envId 0) [] in WAExceptionHandler >> handleExceptionsDuring: | (envId 0) [] in ExecBlock >> on:do: (envId 0) AbstractException >> | _executeHandler: (envId 0) AbstractException >> _signalWith: (envId | 0) AbstractException >> signal (envId 0) Object >> | doesNotUnderstand: (envId 0) Object >> | _doesNotUnderstand:args:envId:reason: (envId 0) Announcer >> | subscribe:do: (envId 0) Announcer >> on:do: (envId 0) | PRAdminNavigator >> announcementRegister (envId 0) | PRAdminAnnouncingComponent >> initialize (envId 0) GRObject class >> | new (envId 0) PRAdminUIChild class >> | contextGetCallback:contextSetCallback: (envId 0) PRAdminUI >> | navigatorComponent (envId 0) PRAdminUI >> children (envId 0) | WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> | visitPresenter: (envId 0) WAPainterVisitor >> visitComponent: (envId | 0) WAComponent >> accept: (envId 0) WAVisiblePresenterGuide >> | visitDecoration: (envId 0) WADecoration >> accept: (envId 0) | WAPainterVisitor >> visitDecorationsOfComponent: (envId 0) | WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide >> visit: | (envId 0) [] in WAVisiblePresenterGuide >> visitPresenter: (envId 0) | [] in WAPresenter >> childrenDo: (envId 0) Collection >> do: (envId | 0) WAPresenter >> childrenDo: (envId 0) WAVisiblePresenterGuide >> | visitPresenter: (envId 0) WAPainterVisitor >> visitDecoration: | (envId 0) WAVisiblePresenterGuide >> visitDecoration: (envId 0) | WAPainterVisitor >> visitDelegation: (envId 0) WADelegation >> | accept: (envId 0) WAPainterVisitor >> visitDecorationsOfComponent: | (envId 0) WAComponent >> acceptDecorated: (envId 0) WAPresenterGuide | >> visit: (envId 0) WAVisitor >> start: (envId 0) | | | | | Thanks for any suggestion, | | | | | Dario | | _______________________________________________ | Magritte, Pier and Related Tools ... | https://www.iam.unibe.ch/mailman/listinfo/smallwiki _______________________________________________ Magritte, Pier and Related Tools ... https://www.iam.unibe.ch/mailman/listinfo/smallwiki |
Free forum by Nabble | Edit this page |