Morph wont delete in pharo, cant select it...
Locked
Morph wont delete in pharo, cant select it...
 
|
am i doing something obviously wrong?: i have downloaded Pharo 1.1.1 (single click) for Mac OSX bring up the image then: Morph new openInWorld, do it. (get a nice blue square, perfect) click to pick it up and move it around, all is well control click, brings up menu for morph here is where the problems start delete menu option, Blue square wont go away... add halos menu option gives halos but they are on the PasteupMorph (the desktop i think). i cant find any way to get rid of this morph, will i have a blue friend forever? im sure im doing something obviously wrong, just dont know what it is... |
Re: Morph wont delete in pharo, cant select it...
|
|
Try shift-mid-click on morph for halo.
Regards, Gary ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> To: <[hidden email]> Sent: Wednesday, December 08, 2010 7:16 PM Subject: [Pharo-project] Morph wont delete in pharo, cant select it... am i doing something obviously wrong?: i have downloaded Pharo 1.1.1 (single click) for Mac OSX bring up the image then: Morph new openInWorld, do it. (get a nice blue square, perfect) click to pick it up and move it around, all is well control click, brings up menu for morph here is where the problems start delete menu option, Blue square wont go away... add halos menu option gives halos but they are on the PasteupMorph (the desktop i think). i cant find any way to get rid of this morph, will i have a blue friend forever? im sure im doing something obviously wrong, just dont know what it is... |
Re: Morph wont delete in pharo, cant select it...
|
|
anyway to get that on a mac with a 2 button mouse? im on a laptop, i have 2 buttons, but not three. is there some preference that can be set to give me access to that? On Dec 8, 2010, at 2:28 PM, Gary Chambers wrote: > Try shift-mid-click on morph for halo. > > Regards, Gary > > ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> > To: <[hidden email]> > Sent: Wednesday, December 08, 2010 7:16 PM > Subject: [Pharo-project] Morph wont delete in pharo, cant select it... > > > > am i doing something obviously wrong?: > > i have downloaded Pharo 1.1.1 (single click) for Mac OSX > > bring up the image then: > > Morph new openInWorld, do it. (get a nice blue square, perfect) > > click to pick it up and move it around, all is well > > control click, brings up menu for morph > > here is where the problems start > > delete menu option, Blue square wont go away... > > add halos menu option gives halos but they are on the PasteupMorph (the desktop i think). > > i cant find any way to get rid of this morph, will i have a blue friend forever? > > im sure im doing something obviously wrong, just dont know what it is... > > > |
Re: Morph wont delete in pharo, cant select it...
|
|
Not sure, having no Mac (only iPad etc...)
Try opt-shift clicks perhaps? Shift is a definite component of the magic combination! Regards, Gary ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> To: <[hidden email]> Sent: Wednesday, December 08, 2010 7:36 PM Subject: Re: [Pharo-project] Morph wont delete in pharo, cant select it... anyway to get that on a mac with a 2 button mouse? im on a laptop, i have 2 buttons, but not three. is there some preference that can be set to give me access to that? On Dec 8, 2010, at 2:28 PM, Gary Chambers wrote: > Try shift-mid-click on morph for halo. > > Regards, Gary > > ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> > To: <[hidden email]> > Sent: Wednesday, December 08, 2010 7:16 PM > Subject: [Pharo-project] Morph wont delete in pharo, cant select it... > > > > am i doing something obviously wrong?: > > i have downloaded Pharo 1.1.1 (single click) for Mac OSX > > bring up the image then: > > Morph new openInWorld, do it. (get a nice blue square, perfect) > > click to pick it up and move it around, all is well > > control click, brings up menu for morph > > here is where the problems start > > delete menu option, Blue square wont go away... > > add halos menu option gives halos but they are on the PasteupMorph (the > desktop i think). > > i cant find any way to get rid of this morph, will i have a blue friend > forever? > > im sure im doing something obviously wrong, just dont know what it is... > > > |
Re: Morph wont delete in pharo, cant select it...
|
|
ive had my fingers in knots over here trying what seems like every control/alt/shift left button/right button combination. control is usually the way to get the alternate click on a mac with one button but this is the third button. im having no luck. On Dec 8, 2010, at 2:52 PM, Gary Chambers wrote: > Not sure, having no Mac (only iPad etc...) > Try opt-shift clicks perhaps? > Shift is a definite component of the magic combination! > > Regards, Gary > > ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> > To: <[hidden email]> > Sent: Wednesday, December 08, 2010 7:36 PM > Subject: Re: [Pharo-project] Morph wont delete in pharo, cant select it... > > > > anyway to get that on a mac with a 2 button mouse? im on a laptop, i have 2 buttons, but not three. is there some preference that can be set to give me access to that? > > > On Dec 8, 2010, at 2:28 PM, Gary Chambers wrote: > >> Try shift-mid-click on morph for halo. >> >> Regards, Gary >> >> ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> >> To: <[hidden email]> >> Sent: Wednesday, December 08, 2010 7:16 PM >> Subject: [Pharo-project] Morph wont delete in pharo, cant select it... >> >> >> >> am i doing something obviously wrong?: >> >> i have downloaded Pharo 1.1.1 (single click) for Mac OSX >> >> bring up the image then: >> >> Morph new openInWorld, do it. (get a nice blue square, perfect) >> >> click to pick it up and move it around, all is well >> >> control click, brings up menu for morph >> >> here is where the problems start >> >> delete menu option, Blue square wont go away... >> >> add halos menu option gives halos but they are on the PasteupMorph (the desktop i think). >> >> i cant find any way to get rid of this morph, will i have a blue friend forever? >> >> im sure im doing something obviously wrong, just dont know what it is... >> >> >> > > > |
Re: Morph wont delete in pharo, cant select it...
|
|
In reply to this post by Joseph T. Bore
Hi,
first try Inspect on the control click menu, pick the morph and an inspector should show up. On the right side of the inspector write "self delete" and execute it.
Cheers,
Francisco On Wed, Dec 8, 2010 at 5:36 PM, Joseph T. Bore <[hidden email]> wrote:
|
Re: Morph wont delete in pharo, cant select it...
|
|
In reply to this post by Joseph T. Bore
don't cry...
Try alt + shift + click to bring the halos. We did it like that else the halos gets really in your way all the time. Stef On Dec 8, 2010, at 8:55 PM, Joseph T. Bore wrote: > > ive had my fingers in knots over here trying what seems like every control/alt/shift left button/right button combination. > > control is usually the way to get the alternate click on a mac with one button but this is the third button. im having no luck. > > > > > On Dec 8, 2010, at 2:52 PM, Gary Chambers wrote: > >> Not sure, having no Mac (only iPad etc...) >> Try opt-shift clicks perhaps? >> Shift is a definite component of the magic combination! >> >> Regards, Gary >> >> ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> >> To: <[hidden email]> >> Sent: Wednesday, December 08, 2010 7:36 PM >> Subject: Re: [Pharo-project] Morph wont delete in pharo, cant select it... >> >> >> >> anyway to get that on a mac with a 2 button mouse? im on a laptop, i have 2 buttons, but not three. is there some preference that can be set to give me access to that? >> >> >> On Dec 8, 2010, at 2:28 PM, Gary Chambers wrote: >> >>> Try shift-mid-click on morph for halo. >>> >>> Regards, Gary >>> >>> ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> >>> To: <[hidden email]> >>> Sent: Wednesday, December 08, 2010 7:16 PM >>> Subject: [Pharo-project] Morph wont delete in pharo, cant select it... >>> >>> >>> >>> am i doing something obviously wrong?: >>> >>> i have downloaded Pharo 1.1.1 (single click) for Mac OSX >>> >>> bring up the image then: >>> >>> Morph new openInWorld, do it. (get a nice blue square, perfect) >>> >>> click to pick it up and move it around, all is well >>> >>> control click, brings up menu for morph >>> >>> here is where the problems start >>> >>> delete menu option, Blue square wont go away... >>> >>> add halos menu option gives halos but they are on the PasteupMorph (the desktop i think). >>> >>> i cant find any way to get rid of this morph, will i have a blue friend forever? >>> >>> im sure im doing something obviously wrong, just dont know what it is... >>> >>> >>> >> >> >> > > |
|
|
In reply to this post by Francisco Ortiz Peñaloza
I have downloaded the 1.1.1 Pharo "One Click" image and I am trying to load the ODBC package from squeaksource. FFI stuff is obviously missing... What happened to the ScriptLoader>>#loadFFI method? How should I load ODBC ? Am I missing something? Thanks! Benoit St-Jean Yahoo! Messenger: bstjean A standpoint is an intellectual horizon of radius zero. (Albert Einstein) |
|
|
Hi Benoit,
FFI is an external package that you should load. Mariano explained how to do it in a previous message here: http://forum.world.st/Is-FFI-installation-broken-td3061587.html#a3061643
#Luc 2010/12/8 Benoit St-Jean <[hidden email]>
|
Re: Morph wont delete in pharo, cant select it...
|
|
In reply to this post by Stéphane Ducasse
This worked great, thanks. I have an osx machine running on non apple hardware where the solution was less obvious but on my Mac it worked great, thanks everyone! jb On Dec 8, 2010, at 3:01 PM, Stéphane Ducasse <[hidden email]> wrote: > don't cry... > > Try alt + shift + click to bring the halos. > > We did it like that else the halos gets really in your way all the time. > > Stef > > > On Dec 8, 2010, at 8:55 PM, Joseph T. Bore wrote: > >> >> ive had my fingers in knots over here trying what seems like every control/alt/shift left button/right button combination. >> >> control is usually the way to get the alternate click on a mac with one button but this is the third button. im having no luck. >> >> >> >> >> On Dec 8, 2010, at 2:52 PM, Gary Chambers wrote: >> >>> Not sure, having no Mac (only iPad etc...) >>> Try opt-shift clicks perhaps? >>> Shift is a definite component of the magic combination! >>> >>> Regards, Gary >>> >>> ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> >>> To: <[hidden email]> >>> Sent: Wednesday, December 08, 2010 7:36 PM >>> Subject: Re: [Pharo-project] Morph wont delete in pharo, cant select it... >>> >>> >>> >>> anyway to get that on a mac with a 2 button mouse? im on a laptop, i have 2 buttons, but not three. is there some preference that can be set to give me access to that? >>> >>> >>> On Dec 8, 2010, at 2:28 PM, Gary Chambers wrote: >>> >>>> Try shift-mid-click on morph for halo. >>>> >>>> Regards, Gary >>>> >>>> ----- Original Message ----- From: "Joseph T. Bore" <[hidden email]> >>>> To: <[hidden email]> >>>> Sent: Wednesday, December 08, 2010 7:16 PM >>>> Subject: [Pharo-project] Morph wont delete in pharo, cant select it... >>>> >>>> >>>> >>>> am i doing something obviously wrong?: >>>> >>>> i have downloaded Pharo 1.1.1 (single click) for Mac OSX >>>> >>>> bring up the image then: >>>> >>>> Morph new openInWorld, do it. (get a nice blue square, perfect) >>>> >>>> click to pick it up and move it around, all is well >>>> >>>> control click, brings up menu for morph >>>> >>>> here is where the problems start >>>> >>>> delete menu option, Blue square wont go away... >>>> >>>> add halos menu option gives halos but they are on the PasteupMorph (the desktop i think). >>>> >>>> i cant find any way to get rid of this morph, will i have a blue friend forever? >>>> >>>> im sure im doing something obviously wrong, just dont know what it is... >>>> >>>> >>>> >>> >>> >>> >> >> > > |
Re: ODBC, loadFFI and friends!
|
|
In reply to this post by Luc Fabresse
And once torsten said:
Hi there, there is work going on for further development of the ODBC package (the one that was original developed by Diego Gomez Deck) in http://squeaksource.com/ODBC/ For easier access from within Pharo/Squeak I wrote a Metacello configuration: ------------------------------ ------------------------------- Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfODBC'; load. (Smalltalk at: #ConfigurationOfODBC) load ------------------------------------------------------------- Have fun Torsten On Wed, Dec 8, 2010 at 9:18 PM, Luc Fabresse <[hidden email]> wrote: Hi Benoit, |
Re: ODBC, loadFFI and friends!
|
|
Torsten,
Please have a look at http://www.squeaksource.com/PharoInbox/DolphinCompatibility-ODBC-BillSchwab.3.mcz It adds a few methods that I missed (one could argue that I should package some of this separately) and gives access to table and field names. Bill ________________________________________ From: [hidden email] [[hidden email]] On Behalf Of Mariano Martinez Peck [[hidden email]] Sent: Thursday, December 09, 2010 5:16 AM To: [hidden email] Subject: Re: [Pharo-project] ODBC, loadFFI and friends! And once torsten said: Hi there, there is work going on for further development of the ODBC package (the one that was original developed by Diego Gomez Deck) in http://squeaksource.com/ODBC/ For easier access from within Pharo/Squeak I wrote a Metacello configuration: ------------------------------ ------------------------------- Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfODBC'; load. (Smalltalk at: #ConfigurationOfODBC) load ------------------------------------------------------------- Have fun Torsten On Wed, Dec 8, 2010 at 9:18 PM, Luc Fabresse <[hidden email]<mailto:[hidden email]>> wrote: Hi Benoit, FFI is an external package that you should load. Mariano explained how to do it in a previous message here: http://forum.world.st/Is-FFI-installation-broken-td3061587.html#a3061643 #Luc 2010/12/8 Benoit St-Jean <[hidden email]<mailto:[hidden email]>> I have downloaded the 1.1.1 Pharo "One Click" image and I am trying to load the ODBC package from squeaksource. FFI stuff is obviously missing... What happened to the ScriptLoader>>#loadFFI method? How should I load ODBC ? Am I missing something? Thanks! ----------------- Benoit St-Jean Yahoo! Messenger: bstjean A standpoint is an intellectual horizon of radius zero. (Albert Einstein) |
«
Return to Pharo Smalltalk Developers
|
1 view|%1 views
| Free forum by Nabble | Edit this page |