Newbie on GLASS - Hello world fail

I found I don't have a ConfigurationOfSeaside defined. I searched online and found this and run it to test it:

Gofer new 

        squeaksource: 'MetacelloRepository'; 

        package: 'ConfigurationOfSeaside'; 

        load.

Thanks Ezequiel!

On Tue, Sep 22, 2015 at 7:35 AM, Ezequiel Tolnay <[hidden email]> wrote:

Hi Mariano,

The -a (low caps) was a typo, oops!

Until I get the hang of the smalltallkers lingo, any instructions I write will be confusing!

1. Zinc
   
• edit WAServerAdaptor class>>startOn:

I probably shouldn't have said edit. Copy the method WAServerAdaptor class>>startOn:, and add to it the following extra parameter: 

• add new parameter bindingAddressOn: aBindingAddress
• add the following line before the last line (adaptor start):
• adaptor server bindingAddress: aBindingAddress.
• save (the adaptor must set its bindingAddress prior to starting, and this method creates it and immediately starts it, so it must be configured either here or as part of the adaptor creation or initialisation)
• edit WAGemStoneRunSeasideGems>>startOn:
• add the following at the end as a second parameter to self adaptorClass
• bindingAddressOn: '127.0.0.1'
• save
• tode /home/seaside/webServer --restart

The code is small enough, I reckon it is easier to just write it here haha!

New method WAServerAdaptor class>>startOn: portInteger bindingAddressOn: aBindingAddress

  "Convenience method to start a single adaptor on the specified port. If an existing

adaptor of this type is already registered, it will be restarted on the specified port."

  | adaptor |

  adaptor := self default.

  adaptor isNil

    ifFalse: [ 

      adaptor

        stop;

        port: portInteger ]

    ifTrue: [ adaptor := self port: portInteger ].

  adaptor server bindingAddress: aBindingAddress.

  adaptor start

Update WAGemStoneRunSeasideGems>>startOn: port

  self adaptorClass startOn: port bindingAddressOn: '127.0.0.1'

Cheers!

Ziggy

On 22 September 2015 at 11:54, Mariano Martinez Peck <[hidden email]> wrote:

Hi Ezequiel,

Quick question and then I answer inline. ..Just to know how much I should test this...did you really test it? I mean, with and without the changes and trying to access from outside localhost? 

On Mon, Sep 21, 2015 at 1:43 PM, Ezequiel Tolnay <[hidden email]> wrote:

Limiting access to localhost:

1. GemStone: 
• add the following to $GS_HOME/gemstone/stones/devKit/extents/system.conf
  
• STN_LISTENING_ADDRESSES = "::1";

Cool, easy.

 

1. NetLDI:
• trickier, I couldn't manage to get the parameter injected by the caller, so I replace the binary with a script that injects -A ::1 before all other parameters, as follows:
• sudo mv $GS_HOME/gemstone/products/GemStone64Bit3.2.8.1-x86_64.Linux/bin/startnetldi{,_bin}
  
• sudo sh -c "echo -e '#\x21/bin/bash\n\${0}_bin -a ::1 \$*' > $GS_HOME/gemstone/products/GemStone64Bit3.2.8.1-x86_64.

For me it easy because I start netldi with my custom scripts. BTW... note that the argument is "-A" (uppercase), not "-a" as you show above because that's another argument ("  all processes started by the netldi will belong to this account."). I guess it was an email writing problem and you were using -A instead ?

 

• Linux/bin/startnetldi"
• sudo chmod +x $GS_HOME/gemstone/products/GemStone64Bit3.2.8.1-x86_64.Linux/bin/startnetldi
1. Zinc
• edit WAServerAdaptor class>>startOn:
• add new parameter bindingAddressOn: aBindingAddress
• add the following line before the last line (adaptor start):
• adaptor server bindingAddress: aBindingAddress.
• save (the adaptor must set its bindingAddress prior to starting, and this method creates it and immediately starts it, so it must be configured either here or as part of the adaptor creation or initialisation)
• edit WAGemStoneRunSeasideGems>>startOn:
• add the following at the end as a second parameter to self adaptorClass
• bindingAddressOn: '127.0.0.1'
• save
• tode /home/seaside/webServer --restart

mmmmm I don't have any #bindingAddressOn: method defined anywhere. Maybe it's because of the version of Seaside I am using. Could you please share with me which class implements such a method and which is the source code of such method ?

Thanks in advance, 

 

Cheers!

Ziggy

On 22 September 2015 at 02:14, Mariano Martinez Peck <[hidden email]> wrote:

Cool!!!

Let me know did you do the zinc thingy to only bind localhost ;)  I would also like to have netldi and Zinc only accepting from localhost!

On Mon, Sep 21, 2015 at 1:12 PM, Ezequiel Tolnay <[hidden email]> wrote:

Good news, I reinstalled the whole thing again from scratch (the latest version in the dev branch) and now it is working!

From Hello World to a full featured website will be a steep uphill, but I finally have a working environment! Stoked :)

Cheers!

Ziggy

On 21 September 2015 at 22:03, Ezequiel Tolnay <[hidden email]> wrote:

Hi Mariano,

Thanks for the feedback!

I don't know which version of seaside gets installed, 3.1x apparently. After running "./installServer devKit 3.2.8.1" from a copy of the dev branch of the tODE devKit, as per Dale's instructions, I mounted Seaside in tODE, installed, and registered it as follows:

• mount @/sys/stone/dirs/gsDevKitHome/projects/seaside31 /home seaside
  
• /home/seaside/install
  
• cd /home/seaside
  
• ./webServer --register=zinc --port=8383
  
• ./webServer --start
  

The stack at the error (continuation from the object log) is the following (the error is in the 15th position):

aTDDebugger

--------------------

1. WAGemStoneProductionErrorHandler(WAErrorHandler)>>saveExceptionContinuation: @10 line 7

2. WAGemStoneProductionErrorHandler>>handleDefault: @2 line 3

3. WAGemStoneProductionErrorHandler(WAErrorHandler)>>handleError: @2 line 2

4. WAGemStoneProductionErrorHandler(WAErrorHandler)>>handleGemStoneException: @4 line 4

5. WAGemStoneProductionErrorHandler(WAHtmlHaltAndErrorHandler)>>handleException: @2 line 2

6. [] in WAGemStoneProductionErrorHandler(WAExceptionHandler)>>handleExceptionsDuring: @2 line 5

7. WAGemStoneProductionErrorHandler(ExecBlock)>>on:do: @3 line 42

8. [] in WAGemStoneProductionErrorHandler(WAExceptionHandler)>>handleExceptionsDuring: @2 line 8

9. [] in ExecBlock>>on:do: @4 line 49

10. MessageNotUnderstood(AbstractException)>>_executeHandler: @3 line 8

11. MessageNotUnderstood(AbstractException)>>_signalWith: @1 line 1

12. MessageNotUnderstood(AbstractException)>>signal @2 line 47

13. Symbol(Object)>>doesNotUnderstand: @9 line 10

14. Symbol(Object)>>_doesNotUnderstand:args:envId:reason: @7 line 12

15. [] in WAInitialRenderLoopContinuation>>createRoot @3 line 3

16. GRSmallDictionary>>at:ifAbsent: @8 line 8

17. WAGemStoneRequestContext(WARequestContext)>>rootComponentIfAbsent: @3 line 3

18. WAInitialRenderLoopContinuation>>createRoot @3 line 3

19. WAInitialRenderLoopContinuation>>basicPerformAction @2 line 3

20. [] in WAInitialRenderLoopContinuation(WAActionPhaseContinuation)>>performAction @2 line 2

21. WAInitialRenderLoopContinuation(ExecBlock)>>onException:do: @2 line 66

22. WAInitialRenderLoopContinuation(ExecBlock)>>on:do: @5 line 47

23. WAGemStoneProductionErrorHandler(WAExceptionHandler)>>handleExceptionsDuring: @2 line 3

24. [] in ExecBlock(WARenderLoopContinuation)>>withNotificationHandlerDo: @2 line 20

25. ExecBlock>>on:do: @3 line 42

26. WAInitialRenderLoopContinuation(WARenderLoopContinuation)>>withNotificationHandlerDo: @8 line 21

27. WAInitialRenderLoopContinuation(WAActionPhaseContinuation)>>performAction @2 line 2

28. WAInitialRenderLoopContinuation(WAActionPhaseContinuation)>>handleFiltered: @2 line 2

29. [] in WAInitialRenderLoopContinuation(WARequestHandler)>>handle: @3 line 4

30. WAInitialRenderLoopContinuation(ExecBlock)>>on:do: @3 line 42

31. WACurrentRequestContext class(WADynamicVariable class)>>use:during: @2 line 4

32. [] in WAGemStoneRequestContext(WARequestContext)>>push:during: @2 line 5

33. WAGemStoneRequestContext(ExecBlock)>>ensure: @2 line 12

34. WAGemStoneRequestContext(WARequestContext)>>push:during: @3 line 6

35. WAInitialRenderLoopContinuation(WARequestHandler)>>handle: @2 line 4

36. [] in WAInitialRenderLoopContinuation(WASessionContinuation)>>handle: @2 line 5

37. WAInitialRenderLoopContinuation(ExecBlock)>>on:do: @3 line 42

38. WAInitialRenderLoopContinuation(WASessionContinuation)>>withUnregisteredHandlerDo: @2 line 3

39. WAInitialRenderLoopContinuation(WASessionContinuation)>>handle: @4 line 5

40. WASession>>start @6 line 2

41. [] in WASession>>handleFiltered: @2 line 15

42. WAMergedRequestFields>>at:ifAbsent: @3 line 6

43. WASession>>handleFiltered: @16 line 14

44. [] in WASession(WARequestHandler)>>handle: @3 line 4

45. WASession(ExecBlock)>>on:do: @3 line 42

46. WACurrentRequestContext class(WADynamicVariable class)>>use:during: @2 line 4

47. [] in WAGemStoneRequestContext(WARequestContext)>>push:during: @2 line 5

48. WAGemStoneRequestContext(ExecBlock)>>ensure: @2 line 12

49. WAGemStoneRequestContext(WARequestContext)>>push:during: @3 line 6

50. WASession(WARequestHandler)>>handle: @2 line 4

51. WASession>>handle: @10 line 11

52. WAApplication(WARegistry)>>dispatch:to:key: @4 line 6

53. WAApplication(WARegistry)>>handle:registering: @4 line 7

54. WAApplication>>handleDefault: @3 line 2

55. WAApplication(WARegistry)>>handleFiltered: @7 line 6

56. WAApplication>>handleFiltered: @10 line 8

57. WAExceptionFilter(WARequestFilter)>>handleFiltered: @3 line 4

58. [] in WAExceptionFilter>>handleFiltered: @2 line 7

59. WAExceptionFilter(ExecBlock)>>on:do: @3 line 42

60. WACurrentExceptionHandler class(WADynamicVariable class)>>use:during: @2 line 4

61. [] in WAExceptionFilter>>handleFiltered: @2 line 6

62. WAExceptionFilter(ExecBlock)>>onException:do: @2 line 66

63. WAExceptionFilter(ExecBlock)>>on:do: @5 line 47

64. WAGemStoneProductionErrorHandler(WAExceptionHandler)>>handleExceptionsDuring: @2 line 3

65. WAExceptionFilter>>handleFiltered: @5 line 4

66. [] in WAApplication(WARequestHandler)>>handle: @3 line 4

67. WAApplication(ExecBlock)>>on:do: @3 line 42

68. WACurrentRequestContext class(WADynamicVariable class)>>use:during: @2 line 4

69. [] in WAGemStoneRequestContext(WARequestContext)>>push:during: @2 line 5

70. WAGemStoneRequestContext(ExecBlock)>>ensure: @2 line 12

71. WAGemStoneRequestContext(WARequestContext)>>push:during: @3 line 6

72. WAApplication(WARequestHandler)>>handle: @2 line 4

73. WADispatcher>>handleFiltered:named: @3 line 5

74. WADispatcher>>handleFiltered: @8 line 6

75. [] in WADispatcher(WARequestHandler)>>handle: @3 line 4

76. WADispatcher(ExecBlock)>>on:do: @3 line 42

77. WACurrentRequestContext class(WADynamicVariable class)>>use:during: @2 line 4

78. [] in WAGemStoneRequestContext(WARequestContext)>>push:during: @2 line 5

79. WAGemStoneRequestContext(ExecBlock)>>ensure: @2 line 12

80. WAGemStoneRequestContext(WARequestContext)>>push:during: @3 line 6

81. WADispatcher(WARequestHandler)>>handle: @2 line 4

82. [] in WAGsZincAdaptor(WAServerAdaptor)>>handleRequest: @3 line 4

83. WAGsZincAdaptor(ExecBlock)>>on:do: @3 line 42

84. WAGsZincAdaptor(WAServerAdaptor)>>handleRequest: @2 line 5

85. WAGsZincAdaptor(WAServerAdaptor)>>handle: @2 line 4

86. [] in WAGsZincAdaptor(WAServerAdaptor)>>process: @2 line 6

87. WAGsZincAdaptor(ExecBlock)>>ensure: @2 line 12

88. WAGsZincAdaptor(WAServerAdaptor)>>process: @4 line 7

89. [] in WAGsZincAdaptor>>process: @2 line 6

90. [] in GRGemStonePlatform>>seasideProcessRequestWithRetry:resultBlock: @2 line 12

91. GRGemStonePlatform(ExecBlock)>>on:do: @3 line 42

92. [] in GRGemStonePlatform>>seasideProcessRequestWithRetry:resultBlock: @11 line 13

93. GRGemStonePlatform(ExecBlock)>>ensure: @2 line 12

94. TransientRecursionLock>>critical: @11 line 12

95. GRGemStonePlatform>>seasideProcessRequestWithRetry:resultBlock: @3 line 6

96. [] in GRGemStonePlatform>>seasideProcessRequest:adaptor:resultBlock: @2 line 6

97. Array(Collection)>>do: @5 line 10

98. [] in GRGemStonePlatform>>seasideProcessRequest:adaptor:resultBlock: @3 line 5

99. GRGemStonePlatform(ExecBlock)>>on:do: @3 line 42

100. GRGemStonePlatform>>seasideProcessRequest:adaptor:resultBlock: @2 line 12

101. WAGsZincAdaptor>>process: @3 line 4

102. ZnSeasideServerAdaptorDelegate>>handleRequest: @3 line 4

103. [] in ZnManagingMultiThreadedServer(ZnSingleThreadedServer)>>authenticateAndDelegateRequest: @7 line 12

104. ZnManagingMultiThreadedServer(ZnSingleThreadedServer)>>authenticateRequest:do: @4 line 6

105. ZnManagingMultiThreadedServer(ZnSingleThreadedServer)>>authenticateAndDelegateRequest: @2 line 8

106. [] in ZnManagingMultiThreadedServer(ZnSingleThreadedServer)>>handleRequestProtected: @2 line 5

107. ZnManagingMultiThreadedServer(ExecBlock)>>on:do: @3 line 42

108. ZnManagingMultiThreadedServer(ZnSingleThreadedServer)>>handleRequestProtected: @2 line 6

109. ZnManagingMultiThreadedServer(ZnSingleThreadedServer)>>handleRequest: @5 line 9

110. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>executeOneRequestResponseOn: @2 line 11

111. ZnManagingMultiThreadedServer(ExecBlock)>>on:do: @3 line 42

112. ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>executeOneRequestResponseOn: @6 line 15

113. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>executeRequestResponseLoopOn: @2 line 10

114. [] in ZnCurrentServer class(DynamicVariable class)>>value:during: @3 line 9

115. ZnCurrentServer class(ExecBlock)>>ensure: @2 line 12

116. ZnCurrentServer class(DynamicVariable class)>>value:during: @6 line 10

117. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>executeRequestResponseLoopOn: @4 line 9

118. ZnManagingMultiThreadedServer(ExecBlock)>>on:do: @3 line 42

119. ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>executeRequestResponseLoopOn: @4 line 11

120. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>serveConnectionsOn: @2 line 17

121. ZnManagingMultiThreadedServer(ExecBlock)>>on:do: @3 line 42

122. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>serveConnectionsOn: @2 line 18

123. ZnManagingMultiThreadedServer(ExecBlock)>>ensure: @2 line 12

124. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>serveConnectionsOn: @2 line 20

125. [] in ExecBlock>>ifCurtailed: @2 line 6

126. ExecBlock>>ensure: @2 line 12

127. ZnManagingMultiThreadedServer(ExecBlock)>>ifCurtailed: @3 line 8

128. [] in ZnManagingMultiThreadedServer(ZnMultiThreadedServer)>>serveConnectionsOn: @2 line 23

129. GsProcess>>_start @7 line 16

130. GsNMethod class>>_gsReturnToC @1 line 1

About NetLDI port, I found what the problem is. gs64ldi is the default ldi service name and port, but in devKit the ldi is called devKit_ldi. I added a devKit_ldi to /etc/services and now it works well.

According to $GS_HOME/projects/seaside31/install.ston, it looks like it is installing seaside3.1.3.1.

I found I don't have a ConfigurationOfSeaside defined. I searched online and found this and run it to test it:

Gofer new 

        squeaksource: 'MetacelloRepository'; 

        package: 'ConfigurationOfSeaside'; 

        load.

ConfigurationOfSeaside now is there, "ConfigurationOfSeaside project" works well, but "ConfigurationOfSeaside project latestVersion" crashes (name not found: Pier tests):

aTDDebugger

--------------------

1. UserDefinedError(AbstractException)>>_signalWith: @5 line 25

2. UserDefinedError(AbstractException)>>signal @2 line 47

3. MetacelloMCVersionSpec(Object)>>error: @6 line 7

4. [] in MetacelloMCVersionSpec(MetacelloVersionSpec)>>resolveToLoadableSpec:forLoad:forMap:packages: @3 line 7

5. [] in MetacelloMCVersionSpec(MetacelloVersionSpec)>>packageNamed:forLoad:forMap:ifAbsent: @33 line 35

6. Dictionary>>at:ifAbsent: @7 line 10

7. MetacelloMCVersionSpec(MetacelloVersionSpec)>>packageNamed:forLoad:forMap:ifAbsent: @2 line 9

8. MetacelloMCVersionSpec(MetacelloVersionSpec)>>resolveToLoadableSpec:forLoad:forMap:packages: @2 line 4

9. [] in MetacelloMCVersionSpec(MetacelloVersionSpec)>>resolveToLoadableSpecs:forLoad:map: @2 line 12

10. [] in ExecBlock1(Set)>>do: @2 line 11

11. [] in ExecBlock2(KeyValueDictionary)>>keysDo: @2 line 7

12. KeyValueDictionary>>keysAndValuesDo: @18 line 15

13. KeyValueDictionary>>keysDo: @2 line 6

14. Set>>do: @3 line 11

15. MetacelloMCVersionSpec(MetacelloVersionSpec)>>resolveToLoadableSpecs:forLoad:map: @13 line 10

16. MetacelloMCVersionSpec(MetacelloVersionSpec)>>resolveToLoadableSpecs: @4 line 12

17. [] in MetacelloMCVersionSpec(MetacelloVersionSpec)>>expandToLoadableSpecNames: @2 line 9

18. [] in ExecBlock1(MetacelloPlatform)>>stackCacheFor:cacheClass:at:doing: @13 line 14

19. [] in ExecBlock0(MetacelloPlatform)>>useStackCacheDuring:defaultDictionary: @2 line 9

20. ExecBlock0(ExecBlock)>>on:do: @3 line 42

21. MetacelloGemStonePlatform(MetacelloPlatform)>>useStackCacheDuring:defaultDictionary: @9 line 10

22. MetacelloGemStonePlatform(MetacelloPlatform)>>stackCacheFor:cacheClass:at:doing: @2 line 4

23. MetacelloGemStonePlatform(MetacelloPlatform)>>stackCacheFor:at:doing: @2 line 3

24. MetacelloMCVersionSpec(MetacelloVersionSpec)>>expandToLoadableSpecNames: @6 line 6

25. MetacelloMCVersionSpec>>computeVersionStatus: @2 line 2

26. MetacelloMCVersion>>computeVersionStatus @3 line 9

27. MetacelloMCVersion(MetacelloVersion)>>versionStatus @3 line 3

28. MetacelloMCVersion(MetacelloVersion)>>printOn: @6 line 5

29. MetacelloMCVersion(Object)>>printString @6 line 14

30. TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>printItMenuAction:selectedText: @5 line 7

31. TDWorkspaceClientElementBuilder(TDWindowBuilder)>>handleMenuActions:listElement:actionArg: @12 line 10

32. [] in TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>menuActionBlock @6 line 8

33. TDWorkspaceClientElementBuilder(ExecBlock)>>value:value:value:value:value: @2 line 11

34. GsNMethod class>>_gsReturnToC @1 line 1

Cheers!

Ziggy

On 21 September 2015 at 00:13, Mariano Martinez Peck <[hidden email]> wrote:

On Sun, Sep 20, 2015 at 9:48 AM, Ezequiel Tolnay via Glass <[hidden email]> wrote:

Hi all!

I've installed the DevKit [dev branch, thanks Dale for your guidence so far] in both my server (Debian Wheezy) and my desktop (OSX), and connect via SSH port forwarding. The seaside gem is now working, the "counter" examples work well, and I tested introducing a divide by zero error to debug via continuation and all went well there. So far so good (with a few hiccups that I managed to resolve on the way).

I'm now attempting the same Seaside tutorial that I did a while ago on Pharo (boquitas). I'm stuck now in the simplest Hello World. I get an error in WAInitialRenderLoopContinuation>>createRoot: 

(error 2010), a Symbol does not understand #'new'".

In the freshly installed devKit, the error raises by doing the following:

1. In tODE workspace:
   
•      WAComponent subclass: #HelloWorld
           instanceVariableNames: '' classVariableNames: ''
           poolDictionaries: '' category: 'GLASS'.
  
2. Browse to HelloWorld in tODE, and add for it a new protocol called "test" (without protocols, adding a new method fails, is this a bug?).
3. Add new method:
   
•      renderContentOn: html
           html heading: 'Hello world!'.
4. Register the class running this in the tODE workspace:
   
•      WAAdmin register: HelloWorld asApplicationAt: 'hello'.
  
5. Open seaside on the Internet browser (http://localhost:8383), "hello" application is there.
6. Click on "hello" raises a "does not understand #new" error.

You may want to copy the stack of the error? (CMD+Shift+P from the tODE debugger will open the stack in a printable way so that you can copy paste) Also..which version of Seaside did you install?

 

A couple more questions:

1. after installing via "./installServer devKit 3.2.8.1" netLDI listens in different random ports each time it starts. How do I get it to listen on the one in the default gs64ldi port 50377 always instead?
   

I am not sure if  the script startNetldi allows you to do that. But, what I can tell you for sure is that dealing directly to netldi, DOES allow you to choose ports. For example, this is how I start netldi in my scripts:

GEMSTONE_USER -n -P $NETLDI_PORT -p`expr $NETLDI_PORT + 1`:`expr $NETLDI_PORT + 2` -l $APPLICATION_LOG_DIR/netldi$APPLICATION_NAME.log netldi$APPLICATION_NAME > $GEMSTONE_LOGDIR/netldiStartup.log 2>&1'

 

Note the arguments -P and -p .. so you maybe need to have you custom script to start/stop netldi (based on startNetldi script) 

https://github.com/GsDevKit/gsDevKitHome/blob/master/bin/startNetldi

Or you can convince Dale to add some arguments to #startNetldi   :)

1. I managed to get GemStone and netLDI to listen in localhost

Uhhhh this is a very good idea!!! This is for security reasons right?

 

1. only via the config option "STN_LISTENING_ADDRESSES = "::1";" on $GS_HOME/gemstone/stones/devKit/extents/system.conf, but couldn't figure out how to configure zinc to listen only on localhost. I modified WAGemStoneRunSeasideGems>>startOn: to "self adaptorClass startOn: port bindingAddressOn: '127.0.0.1'", and created WAServerAdaptor class>>startOn:bindingAddressOn: as a copy of >>startOn:, but with "adaptor server bindingAddress: aBindingAddress." right before "adaptor start". Is there a more appropriate way to do this?

Good idea. Which kind of socket address object are you instantiating and how do you get an instance out of a string like 'localhost'? 

 

1. The standard Seaside landing page on this installation goes straight to the "browse" page, and does not include several of the examples that I remember from the default Seaside installation in Pharo, like the ones that use make use of JQuery. Is this expected in Gemstone's version or is indicative of a partial/failed install?
   

This is very likely because you installed a newer Seaside version whose "ConfigurationOfSeaside" brings different packages by default than what it used to load default. You should simply install the packages/groups you want (like jQuery for example) that are not in the default load. 

For example, this is what I load:

 #('Core' 'Zinc-Seaside' 'Javascript' 'JQuery' 'JSON' 'FastCGI' 'Email')

 

1. 
   

Thanks!

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

--

Mariano
http://marianopeck.wordpress.com

--

Mariano
http://marianopeck.wordpress.com

--

Mariano
http://marianopeck.wordpress.com

--

Mariano
http://marianopeck.wordpress.com

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass