Smalltalk › Usenets › Dolphin Smalltalk

No Execution Incompatibility of D5 and D6 + Workaround

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

5 messages Options

Carsten Haerle

No Execution Incompatibility of D5 and D6 + Workaround

Dolphin XP 5.1 and Dolphin X6 are both incompatible with hardware DEP
(Data Execution Protection) of Windows XP2 and Windows 2003 Server (32
and 64 bit). AMD Opteron and newer Intel processors have hardware
support for DEP.

If you install Dolphin on a Windows 2003 Opteron system and start it
the first time, it immediately crashes with the following Windows
exception:

Dolphin XP5.1: Invalid Access to memory location. Writing 0x76B5BA4,
IP0x76B5BA4
Dolphin X6: Invalid Access to memory location. Writing 0xA4170F0,
IP0xA4170F0

A workaround is to disable DEP unter Control Panel/System but please
fix this Andy.

Regards

Carsten Härle

Andy Bower-3

Re: No Execution Incompatibility of D5 and D6 + Workaround

Carsten,

> Dolphin XP 5.1 and Dolphin X6 are both incompatible with hardware DEP
> (Data Execution Protection) of Windows XP2 and Windows 2003 Server (32
> and 64 bit). AMD Opteron and newer Intel processors have hardware
> support for DEP.
>
> If you install Dolphin on a Windows 2003 Opteron system and start it
> the first time, it immediately crashes with the following Windows
> exception:
>
> Dolphin XP5.1: Invalid Access to memory location. Writing 0x76B5BA4,
> IP0x76B5BA4
> Dolphin X6: Invalid Access to memory location. Writing 0xA4170F0,
> IP0xA4170F0
>
> A workaround is to disable DEP unter Control Panel/System but please
> fix this Andy.

This should be fixed in Dolphin 6.02; which version are you running?
We don't have any intention of retrofitting the fix to D5.1, I'm afraid.

Best regards,

--
Andy Bower
Dolphin Support
www.object-arts.com

Steve Alan Waring

Re: No Execution Incompatibility of D5 and D6 + Workaround

Hi Andy,

> We don't have any intention of retrofitting the fix to D5.1, I'm afraid.

Can you give an estimate of how many support hours it would take for a
D5 fix?

Thanks,
Steve
--
Steve Waring

Carsten Haerle

Re: No Execution Incompatibility of D5 and D6 + Workaround

In reply to this post by Andy Bower-3

In 6.02 the problem has been fixed.

Blair McGlashan-4

Re: No Execution Incompatibility of D5 and D6 + Workaround

In reply to this post by Steve Alan Waring

<[hidden email]> wrote in message
news:[hidden email]...
> Hi Andy,
>
>> We don't have any intention of retrofitting the fix to D5.1, I'm afraid.
>
> Can you give an estimate of how many support hours it would take for a
> D5 fix?
>

Around 1 day. It might be as little as four or five hours, but that depends
on whether a VM change is needed. The main problem is actually in the
ExternalCallback class and can be fixed entirely in Smalltalk, although it's
a bit low level.

Regards

Blair