Smalltalk › Frameworks & Tools › Magritte, Pier and Related Tools

Pier CMS status for Pharo 4.0

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

8 messages Options

dtrussardi@tiscali.it

Pier CMS status for Pharo 4.0

Ciao,

i have a Pharo4.0 Latest update: #40625

where i install, from Configuration Browser, the stable version of :

Pier3 (JohnCBorden.52)

Pier3Addons (StephanEggermont.95)

Now when i open the relative web application:

pier and piersetup

i found some problematic and errors.

Can anyone help me to understand the status of these applications?

How i can load them into Pharo 4.0 ?

Thanks for considerations,

Dario
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

John Borden

Re: Pier CMS status for Pharo 4.0

Pier3Addons version 95 uses the stable version of Pillar, which has removed embedded links from PRReference, version 99 and newer of Pier3Addons is hard-coded to Pillar 1.1.2, which still has the embedded present. Try using the newer version of Pier3Addon configuration.
Thanks,
John

> On Dec 2, 2015, at 5:16 AM, [hidden email] wrote:
>
> Ciao,
>
> i have a Pharo4.0 Latest update: #40625
>
> where i install, from Configuration Browser, the stable version of :
>
> Pier3 (JohnCBorden.52)
>
> Pier3Addons (StephanEggermont.95)
>
>
> Now when i open the relative web application:
>
> pier and piersetup
>
> i found some problematic and errors.
>
>
>
> Can anyone help me to understand the status of these applications?
>
> How i can load them into Pharo 4.0 ?
>
> Thanks for considerations,
>
> Dario
> _______________________________________________
> Magritte, Pier and Related Tools ...
> https://www.list.inf.unibe.ch/listinfo/smallwiki

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

dtrussardi@tiscali.it

Re: Pier CMS status for Pharo 4.0

Ciao,

thanks,

> Pier3Addons version 95 uses the stable version of Pillar, which has removed embedded links from PRReference, version 99 and newer of Pier3Addons is hard-coded to Pillar 1.1.2, which still has the embedded present. Try using the newer version of Pier3Addon configuration.

but into MetaRepoForPharo40

i found only the ConfigurationOfPier3AddOns-StephanEggermont.95.

Where i found the newer version of Pier3Addon configurations ?

Or you intend to load the last version: version311: spec

from ConfigurationOfPier3AddOns-StephanEggermont.95.?

P.S. When into a new Pharo 4.0 image i load the Pier3 (JohnCBorden.52) stable version

the system erase the error:

Character(Object)>>doesNotUnderstand: #greaseInteger
WAUrlEncoder class>>encode:on:
WAUrlEncoder class>>initializeTable
WAUrlEncoder class>>initialize
MCMethodDefinition>>postloadOver:
[ :each | each postloadOver: (self obsoletionFor: each) ] in

What i need to load before ?......

Thanks,

Dario

> Thanks,
> John
>
>> On Dec 2, 2015, at 5:16 AM, [hidden email] wrote:
>>
>> Ciao,
>>
>> i have a Pharo4.0 Latest update: #40625
>>
>> where i install, from Configuration Browser, the stable version of :
>>
>> Pier3 (JohnCBorden.52)
>>
>> Pier3Addons (StephanEggermont.95)
>>
>>
>> Now when i open the relative web application:
>>
>> pier and piersetup
>>
>> i found some problematic and errors.
>>
>>
>>
>> Can anyone help me to understand the status of these applications?
>>
>> How i can load them into Pharo 4.0 ?
>>
>> Thanks for considerations,
>>
>> Dario
>> _______________________________________________
>> Magritte, Pier and Related Tools ...
>> https://www.list.inf.unibe.ch/listinfo/smallwiki
>
> _______________________________________________
> Magritte, Pier and Related Tools ...
> https://www.list.inf.unibe.ch/listinfo/smallwiki

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

Stephan Eggermont-3

Re: Pier CMS status for Pharo 4.0

Hi Dario,

The way we are dealing with metarepos is somewhat problematic.
The creation of a new repo for each new pharo version is wrong. The result
is that the latest version of configurations is often not in all metarepos.

Stephan

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

dtrussardi@tiscali.it

Re: Pier CMS status for Pharo 4.0

Ciao,

> Hi Dario,
>
> The way we are dealing with metarepos is somewhat problematic.
> The creation of a new repo for each new pharo version is wrong. The result
> is that the latest version of configurations is often not in all metarepos.
>

OK..... from: http://www.smalltalkhub.com/mc/Pier/Pier3Addons/main

i load ( ConfigurationOfPier3AddOns project version: #'stable' )

without error!!! ( But i need to load #'development' version ?)

But for example any Magritte package was uploaded,

and the ZnZincServerAdaptor too......

What is the right package sequence to load and which the relative version ?

Thanks for any considerations,

Dario

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

dtrussardi@tiscali.it

Re: Pier CMS status for Pharo 4.0

Ciao,

Ciao,

Hi Dario,

The way we are dealing with metarepos is somewhat problematic.
The creation of a new repo for each new pharo version is wrong. The result
is that the latest version of configurations is often not in all metarepos.

OK..... from: http://www.smalltalkhub.com/mc/Pier/Pier3Addons/main

i load ( ConfigurationOfPier3AddOns project version: #'stable' )

without error!!! ( But i need to load #'development' version ?)

But for example any Magritte package was uploaded,

and the ZnZincServerAdaptor too......

What is the right package sequence to load and which the relative version ?

Into Pharo 4.0 i load:

( ConfigurationOfSeaside3 project version: #'release3.1' ) load. ( ConfigurationOfMagritte3 project version: #'stable' ) load. ( ConfigurationOfMagritte3AddOns project version: #'release3.1' ) load.

with this exception :

This package depends on the following classes:

SAXParserDriver
XMLWellFormedParserTokenizer
You must resolve these dependencies before you will be able to load these definitions:
SAXPositionParserDriver
decodesCharacters
handleEndCDataPosition:
handleEndCommentPosition:
handleEndDeclaration:
handleEndDoctypeDeclarationPosition:
handleEndEntityReferencePosition:
handleEndPIPosition:
handleEndQuotedStringValuePosition:
handleEndTagPosition:
handleEndXMLDeclarationPosition:
handleStartCDataPosition:
handleStartCommentPosition:
handleStartDeclaration:
handleStartDoctypeDeclarationPosition:
handleStartEntityReferencePosition:
handleStartPIPosition:
handleStartQuotedStringValuePosition:
handleStartTagPosition:
handleStartXMLDeclarationPosition:
isValidating
tokenizerClass
XMLPositionWellFormedParserTokenizer
currentPosition
nextAttributeValue
nextCDataSection
nextCharacterReferenceOnWriteStream
nextComment
nextDoctypeDeclaration
nextEndDoctypeDeclaration
nextEntityValue
nextGeneralEntityReferenceOnWriteStream
nextPIWithTarget:
nextParameterEntityReference
nextParameterEntityReferenceInDeclaration
nextParameterEntityReferenceOnWriteStream
nextSubsetDeclaration
nextTag
nextXMLDeclaration
setDriver:stream:readLimit:

( ConfigurationOfPier3 project version: #'release3.1' ) load. ( ConfigurationOfPier3AddOns project version: #'release3.1' ) load

with this exception:

A) XML-Parser have unsaved change in the image

B) PRAdminSetup initialize

| piersetup |

piersetup := (WAAdmin register: self asApplicationAt: 'piersetup')

preferenceAt: #useCookies put: false; ****** useCookies is not configured *******

NOW when i open the: pier and the: pier-setup applications the system report some errors

and is not operating.

Some Considerations?

Thanks,

Dario

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

dtrussardi@tiscali.it

Re: Pier CMS status for Pharo 4.0

Ciao,

at the end these are my conclusions:

A) into Pharo 4.0 i load:

( ConfigurationOfSeaside3 project version: #'release3.1' )

( ConfigurationOfMagritte3 project version: #'release3.5' )

( ConfigurationOfPier3 project version: #'release3.0' )

With these the pier web applications work fine.

B) I don't load:

( ConfigurationOfMagritte3AddOns project version: #'release3.1' )

what it implemented ? ( i don't remember )

( ConfigurationOfPier3AddOns project version: #'release3.X' )

if i right understand it's not port - supported into the new ' Pier release' .

Someone is working on it ?

Thanks,

Dario

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

John Borden

Re: Pier CMS status for Pharo 4.0

Hi Dario - Below is the script I’ve used to test the configuration:

#!/usr/bin/env ksh

export VERSION=release3.1
# export JOB_NAME=`dirname $PWD`
export JOB_NAME=$PWD/pier_addons

curl get.pharo.org/50+vm | bash

./pharo Pharo.image save $JOB_NAME --delete-old
./pharo $JOB_NAME.image --version > version.txt

REPO=http://smalltalkhub.com/mc/Pier/Pier3Addons/main
# not all add ons have tests yet. We list here the projects that do not get loaded with tests.
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Pier-Blog'
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Pier-EditorEnh'
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Pier-Shout'
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Pier-TagCloud'
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Pier-Google'
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Pier-Setup'
# Load the tests, and the add ons with tests
./pharo $JOB_NAME.image config $REPO ConfigurationOfPier3AddOns --install=$VERSION --group='Tests'

./pharo $JOB_NAME.image test --junit-xml-output "Pier.*"

To run it, create a new directory, update the 3.1 to 3.0 if you want the stable version. Change 50 to 40 for Pharo version 4, and run it. Thanks to Stephan Eggermont for this. Let me know if you have trouble with this.

Thanks,

John

On Dec 3, 2015, at 9:03 AM, [hidden email] wrote:

Ciao,

at the end these are my conclusions:

A) into Pharo 4.0 i load:

( ConfigurationOfSeaside3 project version: #'release3.1' )

( ConfigurationOfMagritte3 project version: #'release3.5' )

( ConfigurationOfPier3 project version: #'release3.0' )

With these the pier web applications work fine.

B) I don't load:

( ConfigurationOfMagritte3AddOns project version: #'release3.1' )

what it implemented ? ( i don't remember )

( ConfigurationOfPier3AddOns project version: #'release3.X' )

if i right understand it's not port - supported into the new ' Pier release' .

Someone is working on it ?

Thanks,

Dario

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki

_______________________________________________
Magritte, Pier and Related Tools ...
https://www.list.inf.unibe.ch/listinfo/smallwiki