Smalltalk › Pharo › Pharo Smalltalk Users

QCMagritte on Github

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

15 messages Options

laurent laffont

QCMagritte on Github

Hi,

my team starts to use QCMagritte. For our needs we have imported
SmalltalkHub repository to Github here:
https://github.com/Afibre/QCMagritte

I don't know if you (Diego, Stephan, Tobias) plan to use Github
instead of SmalltalkHub. At least Github allows branches & pull
request.

Regards,

Laurent Laffont

hernanmd

Re: QCMagritte on Github

Nice to know Laurent,

Could you please comment or share how to install this version uploaded
to GitHub?
Any way to check the installed or current QCMagritte version?

Cheers,

Hernán

2017-10-27 7:39 GMT-03:00 laurent laffont <[hidden email]>:

> Hi,
>
> my team starts to use QCMagritte. For our needs we have imported
> SmalltalkHub repository to Github here:
> https://github.com/Afibre/QCMagritte
>
> I don't know if you (Diego, Stephan, Tobias) plan to use Github
> instead of SmalltalkHub. At least Github allows branches & pull
> request.
>
> Regards,
>
> Laurent Laffont
>

laurent laffont

Re: QCMagritte on Github

I've added loading instructions in README:

Metacello new
githubUser: 'Afibre' project: 'QCMagritte' commitish: 'master' path: 'src';
baseline: 'QCMagritte';
load.

For the QCMagritte version, there's actually one branch master. If you
need a previous version, I suppose the right way is to create a github
branch from the desired commit in git history and adapt the
BaselineOf...

Laurent

On Fri, Oct 27, 2017 at 2:12 PM, Hernán Morales Durand
<[hidden email]> wrote:

> Nice to know Laurent,
>
> Could you please comment or share how to install this version uploaded
> to GitHub?
> Any way to check the installed or current QCMagritte version?
>
> Cheers,
>
> Hernán
>
>
>
>
> 2017-10-27 7:39 GMT-03:00 laurent laffont <[hidden email]>:
>> Hi,
>>
>> my team starts to use QCMagritte. For our needs we have imported
>> SmalltalkHub repository to Github here:
>> https://github.com/Afibre/QCMagritte
>>
>> I don't know if you (Diego, Stephan, Tobias) plan to use Github
>> instead of SmalltalkHub. At least Github allows branches & pull
>> request.
>>
>> Regards,
>>
>> Laurent Laffont
>>
>

DiegoLont

Re: QCMagritte on Github

Hi,

It was somewhere on my todo list to migrate to Github, but not very high…

but I guess if someone else does this for me, I should be happy about this.

So thank you, I will look up my gut hub account and also change the job. I hope to do this somewhere next week.

I know there a different configurations for different versions of pharo, so did you import only one version, or should there be made branches for the different pharo version?

Regards,
Diego

> On 27 Oct 2017, at 16:50, laurent laffont <[hidden email]> wrote:
>
> I've added loading instructions in README:
>
> Metacello new
> githubUser: 'Afibre' project: 'QCMagritte' commitish: 'master' path: 'src';
> baseline: 'QCMagritte';
> load.
>
>
> For the QCMagritte version, there's actually one branch master. If you
> need a previous version, I suppose the right way is to create a github
> branch from the desired commit in git history and adapt the
> BaselineOf...
>
> Laurent
>
> On Fri, Oct 27, 2017 at 2:12 PM, Hernán Morales Durand
> <[hidden email]> wrote:
>> Nice to know Laurent,
>>
>> Could you please comment or share how to install this version uploaded
>> to GitHub?
>> Any way to check the installed or current QCMagritte version?
>>
>> Cheers,
>>
>> Hernán
>>
>>
>>
>>
>> 2017-10-27 7:39 GMT-03:00 laurent laffont <[hidden email]>:
>>> Hi,
>>>
>>> my team starts to use QCMagritte. For our needs we have imported
>>> SmalltalkHub repository to Github here:
>>> https://github.com/Afibre/QCMagritte
>>>
>>> I don't know if you (Diego, Stephan, Tobias) plan to use Github
>>> instead of SmalltalkHub. At least Github allows branches & pull
>>> request.
>>>
>>> Regards,
>>>
>>> Laurent Laffont
>>>
>>
>

laurent laffont

Re: QCMagritte on Github

Hi Diego,

we used this process to migrate: https://github.com/peteruhnak/git-migration. So we have all history of QCMagritte (including ConfigurationOf). We created the BaselineOf but it only loads latest packages (see https://github.com/Afibre/QCMagritte/blob/master/src/BaselineOfQCMagritte.package/BaselineOfQCMagritte.class/instance/baseline..st ).

So there should be made branches for the different Pharo versions.

If you give me your github I can give you write access to the github repository.

Laurent

Le dim. 29 oct. 2017 à 13:42, Diego Lont <[hidden email]> a écrit :

Hi, It was somewhere on my todo list to migrate to Github, but not very high… but I guess if someone else does this for me, I should be happy about this. So thank you, I will look up my gut hub account and also change the job. I hope to do this somewhere next week. I know there a different configurations for different versions of pharo, so did you import only one version, or should there be made branches for the different pharo version? Regards, Diego
On 27 Oct 2017, at 16:50, laurent laffont <[hidden email]> wrote: I've added loading instructions in README: Metacello new githubUser: 'Afibre' project: 'QCMagritte' commitish: 'master' path: 'src'; baseline: 'QCMagritte'; load. For the QCMagritte version, there's actually one branch master. If you need a previous version, I suppose the right way is to create a github branch from the desired commit in git history and adapt the BaselineOf... Laurent On Fri, Oct 27, 2017 at 2:12 PM, Hernán Morales Durand <[hidden email]> wrote:
Nice to know Laurent, Could you please comment or share how to install this version uploaded to GitHub? Any way to check the installed or current QCMagritte version? Cheers, Hernán 2017-10-27 7:39 GMT-03:00 laurent laffont <[hidden email]>:
Hi, my team starts to use QCMagritte. For our needs we have imported SmalltalkHub repository to Github here: https://github.com/Afibre/QCMagritte I don't know if you (Diego, Stephan, Tobias) plan to use Github instead of SmalltalkHub. At least Github allows branches & pull request. Regards, Laurent Laffont

Stephan Eggermont-3

Re: QCMagritte on Github

In reply to this post by laurent laffont

On 27-10-17 12:39, laurent laffont wrote:
> Hi,
>
> my team starts to use QCMagritte. For our needs we have imported
> SmalltalkHub repository to Github here:
> https://github.com/Afibre/QCMagritte
>
> I don't know if you (Diego, Stephan, Tobias) plan to use Github
> instead of SmalltalkHub. At least Github allows branches & pull
> request.

Definitely, and I'm still struggling a bit with Iceberg. I would
definitely favor a setup where the whole open source part is build on
each commit using travis and images are put on (e.g.) bitbucket.
The current jenkins builds are waiting for Diego to finish some changes,
and he is a bit distracted with plans for a new house.

Tobias told me he's also interested, so I assume he'll provide a
modified baseline for other platforms.

At a certain point we might want to fold all of QCMagritte back into
Magritte, but that is a discussion for later I think.

Stephan

Tobias Pape

Re: QCMagritte on Github

> On 08.11.2017, at 08:15, stephan <[hidden email]> wrote:
>
>
> Tobias told me he's also interested, so I assume he'll provide a modified baseline for other platforms.

Modulo time, as always.
If the convex hull of the dependencies need too much changes for other platforms, I might have to drop that endeavor :/

-t

Stephan Eggermont-3

Re: QCMagritte on Github

On 08-11-17 20:53, Tobias Pape wrote:
> Modulo time, as always. If the convex hull of the dependencies need
> too much changes for other platforms, I might have to drop that
> endeavor :/

And I trust you'll complain about our lack of responsible dependency
management in that case

Stephan

laurent laffont

Re: QCMagritte on Github

In reply to this post by Stephan Eggermont-3

Hi,

Le mer. 8 nov. 2017 à 8:15, stephan <[hidden email]> a écrit :

Definitely, and I'm still struggling a bit with Iceberg. I would definitely favor a setup where the whole open source part is build on each commit using travis and images are put on (e.g.) bitbucket.

Now a QCMagritte image (vm 64) is built by Travis on each commit, see

https://github.com/Afibre/QCMagritte/releases

and

https://travis-ci.org/Afibre/QCMagritte

Laurent

Sean P. DeNigris

Re: QCMagritte on Github

Administrator

In reply to this post by Stephan Eggermont-3

Stephan Eggermont-3 wrote
> At a certain point we might want to fold all of QCMagritte back into
> Magritte, but that is a discussion for later I think.

If you get around to that, also feel free to steal anything you might find
interesting from https://github.com/seandenigris/Magritte3 where I've been
actively developing. I forked because I was developing on the fly for myself
and I was worried about cross platform compatibility (I always use stable
Pharo) and sometimes breaking CI. At this point there are a few hundred
commits from simple cleanups to brand new features.

-----
Cheers,
Sean
--
Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html

Cheers,
Sean

Stephan Eggermont-3

Re: QCMagritte on Github

In reply to this post by laurent laffont

On 10-11-17 15:59, laurent wrote:

> Now a QCMagritte image (vm 64) is built by Travis on each commit, see
>
> https://github.com/Afibre/QCMagritte/releases
>
> and
>
> https://travis-ci.org/Afibre/QCMagritte

Thanks, Laurent,

good to see progress being made.

Stephan

Stephane Ducasse-3

Re: QCMagritte on Github

In reply to this post by Stephan Eggermont-3

For your information.
We got some problem with travis (what a bad idea to have a syntax like
yaml - our industry is looping , even xml is better).
we spent more than 30 min trying with Guille and Andrew to use bash in
a script section (while this is working in some guille project)
it does not in other just because yaml does not know who to find the
end of a line....

Terrible!

Stef

On Wed, Nov 8, 2017 at 8:15 AM, stephan <[hidden email]> wrote:

> On 27-10-17 12:39, laurent laffont wrote:
>>
>> Hi,
>>
>> my team starts to use QCMagritte. For our needs we have imported
>> SmalltalkHub repository to Github here:
>> https://github.com/Afibre/QCMagritte
>>
>> I don't know if you (Diego, Stephan, Tobias) plan to use Github
>> instead of SmalltalkHub. At least Github allows branches & pull
>> request.
>
>
> Definitely, and I'm still struggling a bit with Iceberg. I would definitely
> favor a setup where the whole open source part is build on each commit using
> travis and images are put on (e.g.) bitbucket.
> The current jenkins builds are waiting for Diego to finish some changes, and
> he is a bit distracted with plans for a new house.
>
> Tobias told me he's also interested, so I assume he'll provide a modified
> baseline for other platforms.
>
> At a certain point we might want to fold all of QCMagritte back into
> Magritte, but that is a discussion for later I think.
>
> Stephan
>
>

aglynn42

Re: QCMagritte on Github

YAML is what it says, lol.

I still prefer using SGML and outputting whatever markup I need, although I have to use US army software (that only works on Windows) to do it since Adobe gouges for FrameMaker.

Probably a long lasting hangover from working for IBM years ago. Sure was a headache, so a hangover isn’t that surprising.

Looking for the latest version of that software for a new Win 10 install I came across one of the best quotes on Windows, especially considering the source, though the quote must’ve been written about an old version.

“With luck, this will start Windows, and a dialogue box will appear and tell you the default drive into which IADS will be installed (C:).

If Windows doesn't start up, you could always try launching Windows manually.”

Andrew

From: [hidden email]
Sent: Friday, November 10, 2017 1:21 PM
To: [hidden email]
Subject: Re: [Pharo-users] QCMagritte on Github

For your information.

We got some problem with travis (what a bad idea to have a syntax like

yaml - our industry is looping , even xml is better).

we spent more than 30 min trying with Guille and Andrew to use bash in

a script section (while this is working in some guille project)

it does not in other just because yaml does not know who to find the

end of a line....

Terrible!

Stef

On Wed, Nov 8, 2017 at 8:15 AM, stephan <[hidden email]> wrote:

> On 27-10-17 12:39, laurent laffont wrote:

>> Hi,

>> my team starts to use QCMagritte. For our needs we have imported

>> SmalltalkHub repository to Github here:

>> https://github.com/Afibre/QCMagritte

>> I don't know if you (Diego, Stephan, Tobias) plan to use Github

>> instead of SmalltalkHub. At least Github allows branches & pull

>> request.

> Definitely, and I'm still struggling a bit with Iceberg. I would definitely

> favor a setup where the whole open source part is build on each commit using

> travis and images are put on (e.g.) bitbucket.

> The current jenkins builds are waiting for Diego to finish some changes, and

> he is a bit distracted with plans for a new house.

> Tobias told me he's also interested, so I assume he'll provide a modified

> baseline for other platforms.

> At a certain point we might want to fold all of QCMagritte back into

> Magritte, but that is a discussion for later I think.

> Stephan

Tim Mackinnon

Re: QCMagritte on Github

In reply to this post by Stephane Ducasse-3

I’ll agree that YAML is not an ideal syntax - but I have to also add that I wasn’t that impressed with Travis either, and reading between the lines its the combo of both that might be catching you out.

Even with a few glitches, I’ve been impressed with GitLab although the team I worked with recently found that CircleCI was more to their liking. In both cases you have much more control about what is going on. It may be that you need something a bit more heavy duty - and it might be worth checking out some of the alternatives.

Tim

> On 10 Nov 2017, at 18:20, Stephane Ducasse <[hidden email]> wrote:
>
> For your information.
> We got some problem with travis (what a bad idea to have a syntax like
> yaml - our industry is looping , even xml is better).
> we spent more than 30 min trying with Guille and Andrew to use bash in
> a script section (while this is working in some guille project)
> it does not in other just because yaml does not know who to find the
> end of a line....
>
> Terrible!
>
> Stef
>
> On Wed, Nov 8, 2017 at 8:15 AM, stephan <[hidden email]> wrote:
>> On 27-10-17 12:39, laurent laffont wrote:
>>>
>>> Hi,
>>>
>>> my team starts to use QCMagritte. For our needs we have imported
>>> SmalltalkHub repository to Github here:
>>> https://github.com/Afibre/QCMagritte
>>>
>>> I don't know if you (Diego, Stephan, Tobias) plan to use Github
>>> instead of SmalltalkHub. At least Github allows branches & pull
>>> request.
>>
>>
>> Definitely, and I'm still struggling a bit with Iceberg. I would definitely
>> favor a setup where the whole open source part is build on each commit using
>> travis and images are put on (e.g.) bitbucket.
>> The current jenkins builds are waiting for Diego to finish some changes, and
>> he is a bit distracted with plans for a new house.
>>
>> Tobias told me he's also interested, so I assume he'll provide a modified
>> baseline for other platforms.
>>
>> At a certain point we might want to fold all of QCMagritte back into
>> Magritte, but that is a discussion for later I think.
>>
>> Stephan
>>
>>
>

tblanchard

Re: QCMagritte on Github

In reply to this post by aglynn42

Found this on /r/programming today. Seemed relevant. Gist is that YAML spec is ambiguous and implementations seem to disagree widely on proper interpretation.

https://github.com/cblp/yaml-sucks

On Nov 10, 2017, at 10:37 AM, Andrew Glynn <[hidden email]> wrote:

YAML is what it says, lol.

I still prefer using SGML and outputting whatever markup I need, although I have to use US army software (that only works on Windows) to do it since Adobe gouges for FrameMaker.

Probably a long lasting hangover from working for IBM years ago. Sure was a headache, so a hangover isn’t that surprising.

Looking for the latest version of that software for a new Win 10 install I came across one of the best quotes on Windows, especially considering the source, though the quote must’ve been written about an old version.

“With luck, this will start Windows, and a dialogue box will appear and tell you the default drive into which IADS will be installed (C:).

If Windows doesn't start up, you could always try launching Windows manually.”

Andrew

From: [hidden email]
Sent: Friday, November 10, 2017 1:21 PM
To: [hidden email]
Subject: Re: [Pharo-users] QCMagritte on Github

For your information.
We got some problem with travis (what a bad idea to have a syntax like
yaml - our industry is looping , even xml is better).
we spent more than 30 min trying with Guille and Andrew to use bash in
a script section (while this is working in some guille project)
it does not in other just because yaml does not know who to find the
end of a line....

Terrible!

Stef

On Wed, Nov 8, 2017 at 8:15 AM, stephan <[hidden email]> wrote:
> On 27-10-17 12:39, laurent laffont wrote:
>>
>> Hi,
>>
>> my team starts to use QCMagritte. For our needs we have imported
>> SmalltalkHub repository to Github here:
>> https://github.com/Afibre/QCMagritte
>>
>> I don't know if you (Diego, Stephan, Tobias) plan to use Github
>> instead of SmalltalkHub. At least Github allows branches & pull
>> request.
>
>
> Definitely, and I'm still struggling a bit with Iceberg. I would definitely
> favor a setup where the whole open source part is build on each commit using
> travis and images are put on (e.g.) bitbucket.
> The current jenkins builds are waiting for Diego to finish some changes, and
> he is a bit distracted with plans for a new house.
>
> Tobias told me he's also interested, so I assume he'll provide a modified
> baseline for other platforms.
>
> At a certain point we might want to fold all of QCMagritte back into
> Magritte, but that is a discussion for later I think.
>
> Stephan
>
>