I am a PhD student at UFMG, Brazil, and I'm working with source code
metrics. I have a FAMIX model generated by the inFusion tool and I would like to know if the Moose can export source code metrics (LOC, WMC, LCOM, etc) of Java classes to .CSV ou XML files? Is there any plugin of the Moose that have this functionality? Cesar Couto -- http://www.decom.cefetmg.br/cesar _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Not that I am aware of. But which metrics do you want to have? Actually, writing an exporter would be pretty straightforward to do. If nobody put some effort on this, I can give a try.
Alexandre On 28 Jun 2011, at 16:05, César Couto wrote: > I am a PhD student at UFMG, Brazil, and I'm working with source code > metrics. I have a FAMIX model generated by the inFusion tool and I > would like to know if the Moose can export source code metrics (LOC, > WMC, LCOM, etc) of Java classes to .CSV ou XML files? > > Is there any plugin of the Moose that have this functionality? > > Cesar Couto > > -- > http://www.decom.cefetmg.br/cesar > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
In reply to this post by César Couto
Hello Cesar,
I am working on that and I hope next week it will be possible. Then I can tell how to do that. For now it is not automatic.. you should write some scripts. regards,
2011/6/28 César Couto <[hidden email]> I am a PhD student at UFMG, Brazil, and I'm working with source code -- Andre Hora _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Ok
Alexandre On 28 Jun 2011, at 16:20, Andre Hora wrote: > Hello Cesar, > > I am working on that and I hope next week it will be possible. > Then I can tell how to do that. > > For now it is not automatic.. you should write some scripts. > > regards, > > 2011/6/28 César Couto <[hidden email]> > I am a PhD student at UFMG, Brazil, and I'm working with source code > metrics. I have a FAMIX model generated by the inFusion tool and I > would like to know if the Moose can export source code metrics (LOC, > WMC, LCOM, etc) of Java classes to .CSV ou XML files? > > Is there any plugin of the Moose that have this functionality? > > Cesar Couto > > -- > http://www.decom.cefetmg.br/cesar > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > Andre Hora > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Hello Cesar,
By the moment, you can try the following steps to export the metrics: 1) First, run the script below in the workspace: Gofer new squeaksource: 'FameImportExportEx'; package: 'Fame-ImportExport-Extensions'; load. 2) Then, run the script below setting the metrics you want to export and the name of your model. You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). | stream printer visitor model | stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. model := (MooseModel root) entityNamed: 'MyModelName'. printer := FMTabularPrinter new stream: stream. printer separator: $,. visitor := RepositoryTabularVisitor new. visitor printer: printer. visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). visitor model: model allClasses. visitor basicRun. The result is a CSV in the directory: Contents/Resources of your image, like this: entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut Collection,1414,227,20,35 NotFound,40,8,4,4 ArrayedCollection,318,37,18,7 SizeMismatch,8,2,1,1 SequenceableCollection,2023,225,10,24 HashedCollection,167,35,5,5 CollectionIsEmpty,22,5,2,4 regards, On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: Ok -- Andre Hora _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Andre,
thanks for the scripts. I am going to run. César Couto On Tue, Jun 28, 2011 at 12:44 PM, Andre Hora <[hidden email]> wrote: > Hello Cesar, > > By the moment, you can try the following steps to export the metrics: > > 1) First, run the script below in the workspace: > > Gofer new > squeaksource: 'FameImportExportEx'; > package: 'Fame-ImportExport-Extensions'; > load. > > 2) Then, run the script below setting the metrics you want to export and the > name of your model. > You can also change allClasses by others entities such as allModelClasses, > allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). > > | stream printer visitor model | > > stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. > model := (MooseModel root) entityNamed: 'MyModelName'. > > printer := FMTabularPrinter new stream: stream. > printer separator: $,. > > visitor := RepositoryTabularVisitor new. > visitor printer: printer. > > visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). > visitor model: model allClasses. > > visitor basicRun. > > > The result is a CSV in the directory: Contents/Resources of your image, like > this: > > entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut > Collection,1414,227,20,35 > NotFound,40,8,4,4 > ArrayedCollection,318,37,18,7 > SizeMismatch,8,2,1,1 > SequenceableCollection,2023,225,10,24 > HashedCollection,167,35,5,5 > CollectionIsEmpty,22,5,2,4 > > regards, > > On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> > wrote: >> >> Ok >> >> Alexandre >> >> >> On 28 Jun 2011, at 16:20, Andre Hora wrote: >> >> > Hello Cesar, >> > >> > I am working on that and I hope next week it will be possible. >> > Then I can tell how to do that. >> > >> > For now it is not automatic.. you should write some scripts. >> > >> > regards, >> > >> > 2011/6/28 César Couto <[hidden email]> >> > I am a PhD student at UFMG, Brazil, and I'm working with source code >> > metrics. I have a FAMIX model generated by the inFusion tool and I >> > would like to know if the Moose can export source code metrics (LOC, >> > WMC, LCOM, etc) of Java classes to .CSV ou XML files? >> > >> > Is there any plugin of the Moose that have this functionality? >> > >> > Cesar Couto >> > >> > -- >> > http://www.decom.cefetmg.br/cesar >> > _______________________________________________ >> > Moose-dev mailing list >> > [hidden email] >> > https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> > >> > >> > >> > -- >> > Andre Hora >> > >> > _______________________________________________ >> > Moose-dev mailing list >> > [hidden email] >> > https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > Andre Hora > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- http://www.decom.cefetmg.br/cesar _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
In reply to this post by Andre Hora
shouldn't it be part of Moose?
Alexandre On 28 Jun 2011, at 17:44, Andre Hora wrote: > Hello Cesar, > > By the moment, you can try the following steps to export the metrics: > > 1) First, run the script below in the workspace: > > Gofer new > squeaksource: 'FameImportExportEx'; > package: 'Fame-ImportExport-Extensions'; > load. > > 2) Then, run the script below setting the metrics you want to export and the name of your model. > You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). > > | stream printer visitor model | > > stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. > model := (MooseModel root) entityNamed: 'MyModelName'. > > printer := FMTabularPrinter new stream: stream. > printer separator: $,. > > visitor := RepositoryTabularVisitor new. > visitor printer: printer. > > visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). > visitor model: model allClasses. > > visitor basicRun. > > > The result is a CSV in the directory: Contents/Resources of your image, like this: > > entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut > Collection,1414,227,20,35 > NotFound,40,8,4,4 > ArrayedCollection,318,37,18,7 > SizeMismatch,8,2,1,1 > SequenceableCollection,2023,225,10,24 > HashedCollection,167,35,5,5 > CollectionIsEmpty,22,5,2,4 > > regards, > > On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: > Ok > > Alexandre > > > On 28 Jun 2011, at 16:20, Andre Hora wrote: > > > Hello Cesar, > > > > I am working on that and I hope next week it will be possible. > > Then I can tell how to do that. > > > > For now it is not automatic.. you should write some scripts. > > > > regards, > > > > 2011/6/28 César Couto <[hidden email]> > > I am a PhD student at UFMG, Brazil, and I'm working with source code > > metrics. I have a FAMIX model generated by the inFusion tool and I > > would like to know if the Moose can export source code metrics (LOC, > > WMC, LCOM, etc) of Java classes to .CSV ou XML files? > > > > Is there any plugin of the Moose that have this functionality? > > > > Cesar Couto > > > > -- > > http://www.decom.cefetmg.br/cesar > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > > > > > -- > > Andre Hora > > > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > Andre Hora > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Hello Alex,
Yes, I am still working on that.. and then I could integrate. On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel <[hidden email]> wrote: shouldn't it be part of Moose? -- Andre Hora _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
:)
We want to have an exporter parametrized by a contextImporter + a wizard then we want to select the metrics that should be exported then the format XML or CVS or MSE and get that in Moose Alex if you have some time I still would love to have a window showing me all the time the source code of any entity I look at. Stef On Jun 28, 2011, at 11:52 PM, Andre Hora wrote: > Hello Alex, > Yes, I am still working on that.. and then I could integrate. > > On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel <[hidden email]> wrote: > shouldn't it be part of Moose? > > Alexandre > > > On 28 Jun 2011, at 17:44, Andre Hora wrote: > > > Hello Cesar, > > > > By the moment, you can try the following steps to export the metrics: > > > > 1) First, run the script below in the workspace: > > > > Gofer new > > squeaksource: 'FameImportExportEx'; > > package: 'Fame-ImportExport-Extensions'; > > load. > > > > 2) Then, run the script below setting the metrics you want to export and the name of your model. > > You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). > > > > | stream printer visitor model | > > > > stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. > > model := (MooseModel root) entityNamed: 'MyModelName'. > > > > printer := FMTabularPrinter new stream: stream. > > printer separator: $,. > > > > visitor := RepositoryTabularVisitor new. > > visitor printer: printer. > > > > visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). > > visitor model: model allClasses. > > > > visitor basicRun. > > > > > > The result is a CSV in the directory: Contents/Resources of your image, like this: > > > > entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut > > Collection,1414,227,20,35 > > NotFound,40,8,4,4 > > ArrayedCollection,318,37,18,7 > > SizeMismatch,8,2,1,1 > > SequenceableCollection,2023,225,10,24 > > HashedCollection,167,35,5,5 > > CollectionIsEmpty,22,5,2,4 > > > > regards, > > > > On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: > > Ok > > > > Alexandre > > > > > > On 28 Jun 2011, at 16:20, Andre Hora wrote: > > > > > Hello Cesar, > > > > > > I am working on that and I hope next week it will be possible. > > > Then I can tell how to do that. > > > > > > For now it is not automatic.. you should write some scripts. > > > > > > regards, > > > > > > 2011/6/28 César Couto <[hidden email]> > > > I am a PhD student at UFMG, Brazil, and I'm working with source code > > > metrics. I have a FAMIX model generated by the inFusion tool and I > > > would like to know if the Moose can export source code metrics (LOC, > > > WMC, LCOM, etc) of Java classes to .CSV ou XML files? > > > > > > Is there any plugin of the Moose that have this functionality? > > > > > > Cesar Couto > > > > > > -- > > > http://www.decom.cefetmg.br/cesar > > > _______________________________________________ > > > Moose-dev mailing list > > > [hidden email] > > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > > > > > > > > > -- > > > Andre Hora > > > > > > _______________________________________________ > > > Moose-dev mailing list > > > [hidden email] > > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > > Alexandre Bergel http://www.bergel.eu > > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > > > > > > > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > > > > > -- > > Andre Hora > > > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > Andre Hora > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
> Alex if you have some time I still would love to have a window showing me all the time the source code of any entity I look at.
I also feel such a need. This is something I will work on Cheers, Alexandre > > > > On Jun 28, 2011, at 11:52 PM, Andre Hora wrote: > >> Hello Alex, >> Yes, I am still working on that.. and then I could integrate. >> >> On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel <[hidden email]> wrote: >> shouldn't it be part of Moose? >> >> Alexandre >> >> >> On 28 Jun 2011, at 17:44, Andre Hora wrote: >> >>> Hello Cesar, >>> >>> By the moment, you can try the following steps to export the metrics: >>> >>> 1) First, run the script below in the workspace: >>> >>> Gofer new >>> squeaksource: 'FameImportExportEx'; >>> package: 'Fame-ImportExport-Extensions'; >>> load. >>> >>> 2) Then, run the script below setting the metrics you want to export and the name of your model. >>> You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). >>> >>> | stream printer visitor model | >>> >>> stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. >>> model := (MooseModel root) entityNamed: 'MyModelName'. >>> >>> printer := FMTabularPrinter new stream: stream. >>> printer separator: $,. >>> >>> visitor := RepositoryTabularVisitor new. >>> visitor printer: printer. >>> >>> visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). >>> visitor model: model allClasses. >>> >>> visitor basicRun. >>> >>> >>> The result is a CSV in the directory: Contents/Resources of your image, like this: >>> >>> entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut >>> Collection,1414,227,20,35 >>> NotFound,40,8,4,4 >>> ArrayedCollection,318,37,18,7 >>> SizeMismatch,8,2,1,1 >>> SequenceableCollection,2023,225,10,24 >>> HashedCollection,167,35,5,5 >>> CollectionIsEmpty,22,5,2,4 >>> >>> regards, >>> >>> On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: >>> Ok >>> >>> Alexandre >>> >>> >>> On 28 Jun 2011, at 16:20, Andre Hora wrote: >>> >>>> Hello Cesar, >>>> >>>> I am working on that and I hope next week it will be possible. >>>> Then I can tell how to do that. >>>> >>>> For now it is not automatic.. you should write some scripts. >>>> >>>> regards, >>>> >>>> 2011/6/28 César Couto <[hidden email]> >>>> I am a PhD student at UFMG, Brazil, and I'm working with source code >>>> metrics. I have a FAMIX model generated by the inFusion tool and I >>>> would like to know if the Moose can export source code metrics (LOC, >>>> WMC, LCOM, etc) of Java classes to .CSV ou XML files? >>>> >>>> Is there any plugin of the Moose that have this functionality? >>>> >>>> Cesar Couto >>>> >>>> -- >>>> http://www.decom.cefetmg.br/cesar >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>>> >>>> >>>> -- >>>> Andre Hora >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> -- >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>> Alexandre Bergel http://www.bergel.eu >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> >>> >>> -- >>> Andre Hora >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> >> >> >> -- >> Andre Hora >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
+1 for AspectMaps. Although it should be the Java code so I dont know how this might be achieved ... On 29 Jun 2011, at 02:38, Alexandre Bergel wrote: >> Alex if you have some time I still would love to have a window showing me all the time the source code of any entity I look at. > > I also feel such a need. > This is something I will work on > > Cheers, > Alexandre > >> >> >> >> On Jun 28, 2011, at 11:52 PM, Andre Hora wrote: >> >>> Hello Alex, >>> Yes, I am still working on that.. and then I could integrate. >>> >>> On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel <[hidden email]> wrote: >>> shouldn't it be part of Moose? >>> >>> Alexandre >>> >>> >>> On 28 Jun 2011, at 17:44, Andre Hora wrote: >>> >>>> Hello Cesar, >>>> >>>> By the moment, you can try the following steps to export the metrics: >>>> >>>> 1) First, run the script below in the workspace: >>>> >>>> Gofer new >>>> squeaksource: 'FameImportExportEx'; >>>> package: 'Fame-ImportExport-Extensions'; >>>> load. >>>> >>>> 2) Then, run the script below setting the metrics you want to export and the name of your model. >>>> You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). >>>> >>>> | stream printer visitor model | >>>> >>>> stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. >>>> model := (MooseModel root) entityNamed: 'MyModelName'. >>>> >>>> printer := FMTabularPrinter new stream: stream. >>>> printer separator: $,. >>>> >>>> visitor := RepositoryTabularVisitor new. >>>> visitor printer: printer. >>>> >>>> visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). >>>> visitor model: model allClasses. >>>> >>>> visitor basicRun. >>>> >>>> >>>> The result is a CSV in the directory: Contents/Resources of your image, like this: >>>> >>>> entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut >>>> Collection,1414,227,20,35 >>>> NotFound,40,8,4,4 >>>> ArrayedCollection,318,37,18,7 >>>> SizeMismatch,8,2,1,1 >>>> SequenceableCollection,2023,225,10,24 >>>> HashedCollection,167,35,5,5 >>>> CollectionIsEmpty,22,5,2,4 >>>> >>>> regards, >>>> >>>> On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: >>>> Ok >>>> >>>> Alexandre >>>> >>>> >>>> On 28 Jun 2011, at 16:20, Andre Hora wrote: >>>> >>>>> Hello Cesar, >>>>> >>>>> I am working on that and I hope next week it will be possible. >>>>> Then I can tell how to do that. >>>>> >>>>> For now it is not automatic.. you should write some scripts. >>>>> >>>>> regards, >>>>> >>>>> 2011/6/28 César Couto <[hidden email]> >>>>> I am a PhD student at UFMG, Brazil, and I'm working with source code >>>>> metrics. I have a FAMIX model generated by the inFusion tool and I >>>>> would like to know if the Moose can export source code metrics (LOC, >>>>> WMC, LCOM, etc) of Java classes to .CSV ou XML files? >>>>> >>>>> Is there any plugin of the Moose that have this functionality? >>>>> >>>>> Cesar Couto >>>>> >>>>> -- >>>>> http://www.decom.cefetmg.br/cesar >>>>> _______________________________________________ >>>>> Moose-dev mailing list >>>>> [hidden email] >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>>> >>>>> >>>>> >>>>> -- >>>>> Andre Hora >>>>> >>>>> _______________________________________________ >>>>> Moose-dev mailing list >>>>> [hidden email] >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>>> -- >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>> Alexandre Bergel http://www.bergel.eu >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>>> >>>> >>>> -- >>>> Andre Hora >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> -- >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>> Alexandre Bergel http://www.bergel.eu >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> >>> >>> -- >>> Andre Hora >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- Johan Fabry [hidden email] - http://dcc.uchile.cl/~jfabry PLEIAD Lab - Computer Science Department (DCC) - University of Chile _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Hello,
If you want to try an automatic way to export the properties (metrics), run the script below: Gofer new squeaksource: 'FameImportExportEx'; package: 'Fame-ImportExport-Extensions';
load. Then, right-click on an entity, Utilities -> Export properties, and select the metrics to export. If you export clicking on the MooseModel, several files can be generated, for each group. Export clicking on others entities generates one file. The results (now, just CSV) are in the directory: Contents/Resources. regards, On Wed, Jun 29, 2011 at 8:16 PM, Johan Fabry <[hidden email]> wrote:
-- Andre Hora _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
In reply to this post by abergel
excellent
On Jun 29, 2011, at 8:38 AM, Alexandre Bergel wrote: >> Alex if you have some time I still would love to have a window showing me all the time the source code of any entity I look at. > > I also feel such a need. > This is something I will work on > > Cheers, > Alexandre > >> >> >> >> On Jun 28, 2011, at 11:52 PM, Andre Hora wrote: >> >>> Hello Alex, >>> Yes, I am still working on that.. and then I could integrate. >>> >>> On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel <[hidden email]> wrote: >>> shouldn't it be part of Moose? >>> >>> Alexandre >>> >>> >>> On 28 Jun 2011, at 17:44, Andre Hora wrote: >>> >>>> Hello Cesar, >>>> >>>> By the moment, you can try the following steps to export the metrics: >>>> >>>> 1) First, run the script below in the workspace: >>>> >>>> Gofer new >>>> squeaksource: 'FameImportExportEx'; >>>> package: 'Fame-ImportExport-Extensions'; >>>> load. >>>> >>>> 2) Then, run the script below setting the metrics you want to export and the name of your model. >>>> You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). >>>> >>>> | stream printer visitor model | >>>> >>>> stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. >>>> model := (MooseModel root) entityNamed: 'MyModelName'. >>>> >>>> printer := FMTabularPrinter new stream: stream. >>>> printer separator: $,. >>>> >>>> visitor := RepositoryTabularVisitor new. >>>> visitor printer: printer. >>>> >>>> visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). >>>> visitor model: model allClasses. >>>> >>>> visitor basicRun. >>>> >>>> >>>> The result is a CSV in the directory: Contents/Resources of your image, like this: >>>> >>>> entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut >>>> Collection,1414,227,20,35 >>>> NotFound,40,8,4,4 >>>> ArrayedCollection,318,37,18,7 >>>> SizeMismatch,8,2,1,1 >>>> SequenceableCollection,2023,225,10,24 >>>> HashedCollection,167,35,5,5 >>>> CollectionIsEmpty,22,5,2,4 >>>> >>>> regards, >>>> >>>> On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: >>>> Ok >>>> >>>> Alexandre >>>> >>>> >>>> On 28 Jun 2011, at 16:20, Andre Hora wrote: >>>> >>>>> Hello Cesar, >>>>> >>>>> I am working on that and I hope next week it will be possible. >>>>> Then I can tell how to do that. >>>>> >>>>> For now it is not automatic.. you should write some scripts. >>>>> >>>>> regards, >>>>> >>>>> 2011/6/28 César Couto <[hidden email]> >>>>> I am a PhD student at UFMG, Brazil, and I'm working with source code >>>>> metrics. I have a FAMIX model generated by the inFusion tool and I >>>>> would like to know if the Moose can export source code metrics (LOC, >>>>> WMC, LCOM, etc) of Java classes to .CSV ou XML files? >>>>> >>>>> Is there any plugin of the Moose that have this functionality? >>>>> >>>>> Cesar Couto >>>>> >>>>> -- >>>>> http://www.decom.cefetmg.br/cesar >>>>> _______________________________________________ >>>>> Moose-dev mailing list >>>>> [hidden email] >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>>> >>>>> >>>>> >>>>> -- >>>>> Andre Hora >>>>> >>>>> _______________________________________________ >>>>> Moose-dev mailing list >>>>> [hidden email] >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>>> -- >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>> Alexandre Bergel http://www.bergel.eu >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>>> >>>> >>>> >>>> -- >>>> Andre Hora >>>> >>>> _______________________________________________ >>>> Moose-dev mailing list >>>> [hidden email] >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> -- >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>> Alexandre Bergel http://www.bergel.eu >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >>> >>> >>> >>> -- >>> Andre Hora >>> >>> _______________________________________________ >>> Moose-dev mailing list >>> [hidden email] >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev >> >> >> _______________________________________________ >> Moose-dev mailing list >> [hidden email] >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
In reply to this post by Andre Hora
Thanks andre
I think that it would be nice to have a standard place to by default save results. it should be something like ProjectZXCSS/ project path code/ ocde of the application under analysis scripts/ possible scripts export/ xml csv" models/ "famix models would be saved here" On Jun 29, 2011, at 10:55 PM, Andre Hora wrote: > Hello, > > If you want to try an automatic way to export the properties (metrics), run the script below: > > Gofer new > squeaksource: 'FameImportExportEx'; > package: 'Fame-ImportExport-Extensions'; > load. > > Then, right-click on an entity, Utilities -> Export properties, and select the metrics to export. If you export clicking on the MooseModel, several files can be generated, for each group. Export clicking on others entities generates one file. > The results (now, just CSV) are in the directory: Contents/Resources. > > regards, > > > On Wed, Jun 29, 2011 at 8:16 PM, Johan Fabry <[hidden email]> wrote: > > +1 for AspectMaps. Although it should be the Java code so I dont know how this might be achieved ... > > On 29 Jun 2011, at 02:38, Alexandre Bergel wrote: > > >> Alex if you have some time I still would love to have a window showing me all the time the source code of any entity I look at. > > > > I also feel such a need. > > This is something I will work on > > > > Cheers, > > Alexandre > > > >> > >> > >> > >> On Jun 28, 2011, at 11:52 PM, Andre Hora wrote: > >> > >>> Hello Alex, > >>> Yes, I am still working on that.. and then I could integrate. > >>> > >>> On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel <[hidden email]> wrote: > >>> shouldn't it be part of Moose? > >>> > >>> Alexandre > >>> > >>> > >>> On 28 Jun 2011, at 17:44, Andre Hora wrote: > >>> > >>>> Hello Cesar, > >>>> > >>>> By the moment, you can try the following steps to export the metrics: > >>>> > >>>> 1) First, run the script below in the workspace: > >>>> > >>>> Gofer new > >>>> squeaksource: 'FameImportExportEx'; > >>>> package: 'Fame-ImportExport-Extensions'; > >>>> load. > >>>> > >>>> 2) Then, run the script below setting the metrics you want to export and the name of your model. > >>>> You can also change allClasses by others entities such as allModelClasses, allMethods, allNamespaces, and so on.. (see the class MooseAbstractGroup). > >>>> > >>>> | stream printer visitor model | > >>>> > >>>> stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. > >>>> model := (MooseModel root) entityNamed: 'MyModelName'. > >>>> > >>>> printer := FMTabularPrinter new stream: stream. > >>>> printer separator: $,. > >>>> > >>>> visitor := RepositoryTabularVisitor new. > >>>> visitor printer: printer. > >>>> > >>>> visitor selectors: #(#numberOfLinesOfCode #numberOfMethods #fanIn #fanOut). > >>>> visitor model: model allClasses. > >>>> > >>>> visitor basicRun. > >>>> > >>>> > >>>> The result is a CSV in the directory: Contents/Resources of your image, like this: > >>>> > >>>> entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut > >>>> Collection,1414,227,20,35 > >>>> NotFound,40,8,4,4 > >>>> ArrayedCollection,318,37,18,7 > >>>> SizeMismatch,8,2,1,1 > >>>> SequenceableCollection,2023,225,10,24 > >>>> HashedCollection,167,35,5,5 > >>>> CollectionIsEmpty,22,5,2,4 > >>>> > >>>> regards, > >>>> > >>>> On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel <[hidden email]> wrote: > >>>> Ok > >>>> > >>>> Alexandre > >>>> > >>>> > >>>> On 28 Jun 2011, at 16:20, Andre Hora wrote: > >>>> > >>>>> Hello Cesar, > >>>>> > >>>>> I am working on that and I hope next week it will be possible. > >>>>> Then I can tell how to do that. > >>>>> > >>>>> For now it is not automatic.. you should write some scripts. > >>>>> > >>>>> regards, > >>>>> > >>>>> 2011/6/28 César Couto <[hidden email]> > >>>>> I am a PhD student at UFMG, Brazil, and I'm working with source code > >>>>> metrics. I have a FAMIX model generated by the inFusion tool and I > >>>>> would like to know if the Moose can export source code metrics (LOC, > >>>>> WMC, LCOM, etc) of Java classes to .CSV ou XML files? > >>>>> > >>>>> Is there any plugin of the Moose that have this functionality? > >>>>> > >>>>> Cesar Couto > >>>>> > >>>>> -- > >>>>> http://www.decom.cefetmg.br/cesar > >>>>> _______________________________________________ > >>>>> Moose-dev mailing list > >>>>> [hidden email] > >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > >>>>> > >>>>> > >>>>> > >>>>> -- > >>>>> Andre Hora > >>>>> > >>>>> _______________________________________________ > >>>>> Moose-dev mailing list > >>>>> [hidden email] > >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > >>>> > >>>> -- > >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > >>>> Alexandre Bergel http://www.bergel.eu > >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> Moose-dev mailing list > >>>> [hidden email] > >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > >>>> > >>>> > >>>> > >>>> -- > >>>> Andre Hora > >>>> > >>>> _______________________________________________ > >>>> Moose-dev mailing list > >>>> [hidden email] > >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > >>> > >>> -- > >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > >>> Alexandre Bergel http://www.bergel.eu > >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > >>> > >>> > >>> > >>> > >>> > >>> > >>> _______________________________________________ > >>> Moose-dev mailing list > >>> [hidden email] > >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > >>> > >>> > >>> > >>> -- > >>> Andre Hora > >>> > >>> _______________________________________________ > >>> Moose-dev mailing list > >>> [hidden email] > >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > >> > >> > >> _______________________________________________ > >> Moose-dev mailing list > >> [hidden email] > >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > > Alexandre Bergel http://www.bergel.eu > > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > > > > > > > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > -- > Johan Fabry > [hidden email] - http://dcc.uchile.cl/~jfabry > PLEIAD Lab - Computer Science Department (DCC) - University of Chile > > > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > Andre Hora > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
nice, except that often it could be difficult to relocate the code as it is preexisting, not "controled" by moose, and possibly subject to other constraints by other tools (config.management, compilation, access rigths, ...) So we could look for a way for "code" to contain a pointer to the code instead of the code itself. It could simply be links, but it seems smalltalk has some issues with links (at least on linux). It cold also be a file with the path(s) to the code ... ----- Mail original ----- > De: "Stéphane Ducasse" <[hidden email]> > À: "Moose-related development" <[hidden email]> > Envoyé: Jeudi 30 Juin 2011 14:07:22 > Objet: [Moose-dev] Re: Question about export metrics from Moose > Thanks andre > > I think that it would be nice to have a standard place to by default > save results. > it should be something like > ProjectZXCSS/ project path > code/ ocde of the application under analysis > scripts/ possible scripts > export/ xml csv" > models/ "famix models would be saved here" > > On Jun 29, 2011, at 10:55 PM, Andre Hora wrote: > > > Hello, > > > > If you want to try an automatic way to export the properties > > (metrics), run the script below: > > > > Gofer new > > squeaksource: 'FameImportExportEx'; > > package: 'Fame-ImportExport-Extensions'; > > load. > > > > Then, right-click on an entity, Utilities -> Export properties, and > > select the metrics to export. If you export clicking on the > > MooseModel, several files can be generated, for each group. Export > > clicking on others entities generates one file. > > The results (now, just CSV) are in the directory: > > Contents/Resources. > > > > regards, > > > > > > On Wed, Jun 29, 2011 at 8:16 PM, Johan Fabry <[hidden email]> > > wrote: > > > > +1 for AspectMaps. Although it should be the Java code so I dont > > know how this might be achieved ... > > > > On 29 Jun 2011, at 02:38, Alexandre Bergel wrote: > > > > >> Alex if you have some time I still would love to have a window > > >> showing me all the time the source code of any entity I look at. > > > > > > I also feel such a need. > > > This is something I will work on > > > > > > Cheers, > > > Alexandre > > > > > >> > > >> > > >> > > >> On Jun 28, 2011, at 11:52 PM, Andre Hora wrote: > > >> > > >>> Hello Alex, > > >>> Yes, I am still working on that.. and then I could integrate. > > >>> > > >>> On Tue, Jun 28, 2011 at 11:18 PM, Alexandre Bergel > > >>> <[hidden email]> wrote: > > >>> shouldn't it be part of Moose? > > >>> > > >>> Alexandre > > >>> > > >>> > > >>> On 28 Jun 2011, at 17:44, Andre Hora wrote: > > >>> > > >>>> Hello Cesar, > > >>>> > > >>>> By the moment, you can try the following steps to export the > > >>>> metrics: > > >>>> > > >>>> 1) First, run the script below in the workspace: > > >>>> > > >>>> Gofer new > > >>>> squeaksource: 'FameImportExportEx'; > > >>>> package: 'Fame-ImportExport-Extensions'; > > >>>> load. > > >>>> > > >>>> 2) Then, run the script below setting the metrics you want to > > >>>> export and the name of your model. > > >>>> You can also change allClasses by others entities such as > > >>>> allModelClasses, allMethods, allNamespaces, and so on.. (see > > >>>> the class MooseAbstractGroup). > > >>>> > > >>>> | stream printer visitor model | > > >>>> > > >>>> stream := MultiByteFileStream newFileNamed: 'my-metrics.csv'. > > >>>> model := (MooseModel root) entityNamed: 'MyModelName'. > > >>>> > > >>>> printer := FMTabularPrinter new stream: stream. > > >>>> printer separator: $,. > > >>>> > > >>>> visitor := RepositoryTabularVisitor new. > > >>>> visitor printer: printer. > > >>>> > > >>>> visitor selectors: #(#numberOfLinesOfCode #numberOfMethods > > >>>> #fanIn #fanOut). > > >>>> visitor model: model allClasses. > > >>>> > > >>>> visitor basicRun. > > >>>> > > >>>> > > >>>> The result is a CSV in the directory: Contents/Resources of > > >>>> your image, like this: > > >>>> > > >>>> entityName,numberOfLinesOfCode,numberOfMethods,fanIn,fanOut > > >>>> Collection,1414,227,20,35 > > >>>> NotFound,40,8,4,4 > > >>>> ArrayedCollection,318,37,18,7 > > >>>> SizeMismatch,8,2,1,1 > > >>>> SequenceableCollection,2023,225,10,24 > > >>>> HashedCollection,167,35,5,5 > > >>>> CollectionIsEmpty,22,5,2,4 > > >>>> > > >>>> regards, > > >>>> > > >>>> On Tue, Jun 28, 2011 at 4:23 PM, Alexandre Bergel > > >>>> <[hidden email]> wrote: > > >>>> Ok > > >>>> > > >>>> Alexandre > > >>>> > > >>>> > > >>>> On 28 Jun 2011, at 16:20, Andre Hora wrote: > > >>>> > > >>>>> Hello Cesar, > > >>>>> > > >>>>> I am working on that and I hope next week it will be possible. > > >>>>> Then I can tell how to do that. > > >>>>> > > >>>>> For now it is not automatic.. you should write some scripts. > > >>>>> > > >>>>> regards, > > >>>>> > > >>>>> 2011/6/28 César Couto <[hidden email]> > > >>>>> I am a PhD student at UFMG, Brazil, and I'm working with > > >>>>> source code > > >>>>> metrics. I have a FAMIX model generated by the inFusion tool > > >>>>> and I > > >>>>> would like to know if the Moose can export source code metrics > > >>>>> (LOC, > > >>>>> WMC, LCOM, etc) of Java classes to .CSV ou XML files? > > >>>>> > > >>>>> Is there any plugin of the Moose that have this functionality? > > >>>>> > > >>>>> Cesar Couto > > >>>>> > > >>>>> -- > > >>>>> http://www.decom.cefetmg.br/cesar > > >>>>> _______________________________________________ > > >>>>> Moose-dev mailing list > > >>>>> [hidden email] > > >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > >>>>> > > >>>>> > > >>>>> > > >>>>> -- > > >>>>> Andre Hora > > >>>>> > > >>>>> _______________________________________________ > > >>>>> Moose-dev mailing list > > >>>>> [hidden email] > > >>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > >>>> > > >>>> -- > > >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > > >>>> Alexandre Bergel http://www.bergel.eu > > >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > >>>> > > >>>> > > >>>> > > >>>> > > >>>> > > >>>> > > >>>> _______________________________________________ > > >>>> Moose-dev mailing list > > >>>> [hidden email] > > >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > >>>> > > >>>> > > >>>> > > >>>> -- > > >>>> Andre Hora > > >>>> > > >>>> _______________________________________________ > > >>>> Moose-dev mailing list > > >>>> [hidden email] > > >>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > >>> > > >>> -- > > >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > > >>> Alexandre Bergel http://www.bergel.eu > > >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> _______________________________________________ > > >>> Moose-dev mailing list > > >>> [hidden email] > > >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > >>> > > >>> > > >>> > > >>> -- > > >>> Andre Hora > > >>> > > >>> _______________________________________________ > > >>> Moose-dev mailing list > > >>> [hidden email] > > >>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > >> > > >> > > >> _______________________________________________ > > >> Moose-dev mailing list > > >> [hidden email] > > >> https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > > > -- > > > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > > > Alexandre Bergel http://www.bergel.eu > > > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Moose-dev mailing list > > > [hidden email] > > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > -- > > Johan Fabry > > [hidden email] - http://dcc.uchile.cl/~jfabry > > PLEIAD Lab - Computer Science Department (DCC) - University of Chile > > > > > > > > > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > > > > > > -- > > Andre Hora > > > > _______________________________________________ > > Moose-dev mailing list > > [hidden email] > > https://www.iam.unibe.ch/mailman/listinfo/moose-dev > > > _______________________________________________ > Moose-dev mailing list > [hidden email] > https://www.iam.unibe.ch/mailman/listinfo/moose-dev _______________________________________________ Moose-dev mailing list [hidden email] https://www.iam.unibe.ch/mailman/listinfo/moose-dev |
Free forum by Nabble | Edit this page |