Roassal2

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
16 messages Options
Reply | Threaded
Open this post in threaded view
|

Roassal2

Bernhard Höfner-2
Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard

_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Maarten Mostert

If you're on OSX you probably need to load the parcel CairoGraphics-OSXFix

 

Regards,

 

@+Maarten,



> "Bernhard Höfner" <[hidden email]> |

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?
I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".
When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.
Regards, Bernhard

_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
In reply to this post by Bernhard Höfner-2
Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

> On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:
>
> Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?
>
> I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
> I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
> When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".
>
> When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.
>
> Regards, Bernhard
> _______________________________________________
> vwnc mailing list
> [hidden email]
> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Maarten Mostert
Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.

Regards,

@+Maarten,



> Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :
>
> Hi Bernhard,
>
> Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
> -=-=-=-=-=-=-=-=-=
> visualnc.im created at September 26, 2014 10:27:43 AM
> Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
> Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
> -=-=-=-=-=-=-=-=-=
>
> I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?
>
> Cheers,
> Alexandre
>
>> On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:
>>
>> Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?
>>
>> I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
>> I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
>> When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".
>>
>> When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.
>>
>> Regards, Bernhard
>> _______________________________________________
>> vwnc mailing list
>> [hidden email]
>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel  http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
> _______________________________________________
> vwnc mailing list
> [hidden email]
> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

screengraphicscontext-newcairocontextwhile.st (1K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Holger Kleinsorgen
In reply to this post by Bernhard Höfner-2
Bernhard Höfner-2 wrote
Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".
Load Cairo from VW parcel first (it should be version >= 8.0 - 1), instead of loading the old 7.9 - 12 from the public Store repository.
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
In reply to this post by Maarten Mostert
Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc



_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Bernhard Höfner-2
Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
Regards, Bernhard

Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:

Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Bernhard Höfner

Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
Regards, Bernhard

Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:

Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc



_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
In reply to this post by Bernhard Höfner-2
Okay!
Something that may be key here, is to make sure you install Cairo when you install VW.
You have to choose "customized installation” for this.

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:59 PM, Bernhard Höfner <[hidden email]> wrote:

Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
Regards, Bernhard

Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:

Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc



_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Magnus Schwarz
I wonder whether this will be sufficient - we tried it out, too, and there were several classes missing which did not come from VW (the prefix of the class names was not common to VW). We managed to circumvent some of them, but finally gave up.
BTW: We especially tried to get this "maps" example up and running.
May it be that you have some compatibility package preloaded which is missing from the public repository?

Regards,
Magnus Schwarz

Am 30.06.2015 um 23:14 schrieb Alexandre Bergel:
Okay!
Something that may be key here, is to make sure you install Cairo when you install VW.
You have to choose "customized installation” for this.

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:59 PM, Bernhard Höfner <[hidden email]> wrote:

Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
Regards, Bernhard

Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:

Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
Magnus Schwarz * certified Scrum Master / Smalltalk architect * [hidden email]
phone:+49 231 97599-0 * fax:+49 231 97599-20
Georg Heeg eK Dortmund
Handelsregister: Amtsgericht Dortmund  A 12812
---------------------------------------------------
PGP PUBLIC KEY BLOCK via http://www.heeg.de/~magnus 

_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
This is really odd.

Which map example are you referring to? RTMapBuilder? We have no problem on our machines (a windows and a mac). 

Will you be at the Camp Smalltalk?


| b |
b := RTMapBuilder new.

b countries: RTMapBuilder countries.
b cities: #(
#('New York City' 8337000)
#('Washington, D.C.' 632323)
#('Paris' 2211000)
#('Santiago' 6027000)
#('Shanghai' 23710000))
named: [ :c | c at: 1 ].

b cities withPopup.
b cities shape
size: [ :c | (c at: 2)/300000 + 10 ];
color: (Color red alpha: 0.5).

b routes
from: 'Paris' toAll: #('Santiago' 'New York City' 'Washington, D.C.' 'Shanghai');
color: Color blue;
withPopup: #lengthString.

b color: Color veryVeryLightGray.
b open.

Cheers,
Alexandre


On Jul 1, 2015, at 4:00 AM, Magnus Schwarz <[hidden email]> wrote:

I wonder whether this will be sufficient - we tried it out, too, and there were several classes missing which did not come from VW (the prefix of the class names was not common to VW). We managed to circumvent some of them, but finally gave up.
BTW: We especially tried to get this "maps" example up and running.
May it be that you have some compatibility package preloaded which is missing from the public repository?

Regards,
Magnus Schwarz 

Am 30.06.2015 um 23:14 schrieb Alexandre Bergel:
Okay!
Something that may be key here, is to make sure you install Cairo when you install VW.
You have to choose "customized installation” for this.

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:59 PM, Bernhard Höfner <[hidden email]> wrote:

Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
Regards, Bernhard

Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:

Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator. 

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc




_______________________________________________
vwnc mailing list

[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
Magnus Schwarz * certified Scrum Master / Smalltalk architect * 
[hidden email]

phone:+49 231 97599-0 * fax:+49 231 97599-20
Georg Heeg eK Dortmund
Handelsregister: Amtsgericht Dortmund  A 12812
---------------------------------------------------
PGP PUBLIC KEY BLOCK via 
http://www.heeg.de/~magnus 
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Magnus Schwarz
How about:


| v map e paris |
    v := RTView new.
    map := RTOSM new.
    e := map element.


    v add: e.

    paris := 48.8567 @ 2.3508.
   
    v @ RTDraggableView.
   
    v canvas camera translateTo: (map latLonToRoassal: paris).
    v canvas camera noInitializationWhenOpen.
    v canvas camera scale: 20.
     v open.

Am 01.07.2015 um 15:02 schrieb Alexandre Bergel:
This is really odd.

Which map example are you referring to? RTMapBuilder? We have no problem on our machines (a windows and a mac). 

Will you be at the Camp Smalltalk?


| b |
b := RTMapBuilder new.

b countries: RTMapBuilder countries.
b cities: #(
#('New York City' 8337000)
#('Washington, D.C.' 632323)
#('Paris' 2211000)
#('Santiago' 6027000)
#('Shanghai' 23710000))
named: [ :c | c at: 1 ].

b cities withPopup.
b cities shape
size: [ :c | (c at: 2)/300000 + 10 ];
color: (Color red alpha: 0.5).

b routes
from: 'Paris' toAll: #('Santiago' 'New York City' 'Washington, D.C.' 'Shanghai');
color: Color blue;
withPopup: #lengthString.

b color: Color veryVeryLightGray.
b open.

Cheers,
Alexandre


On Jul 1, 2015, at 4:00 AM, Magnus Schwarz <[hidden email]> wrote:

I wonder whether this will be sufficient - we tried it out, too, and there were several classes missing which did not come from VW (the prefix of the class names was not common to VW). We managed to circumvent some of them, but finally gave up.
BTW: We especially tried to get this "maps" example up and running.
May it be that you have some compatibility package preloaded which is missing from the public repository?

Regards,
Magnus Schwarz 

Am 30.06.2015 um 23:14 schrieb Alexandre Bergel:
Okay!
Something that may be key here, is to make sure you install Cairo when you install VW.
You have to choose "customized installation” for this.

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:59 PM, Bernhard Höfner [hidden email] wrote:

Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
Regards, Bernhard

Am 30.06.2015 um 21:58 schrieb Alexandre Bergel [hidden email]:

Hi Maarten,

This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
I am not sure how I can help more. Will you be at esug? 

Cheers,
Alexandre
-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.



On Jun 30, 2015, at 5:20 AM, Maarten Mostert [hidden email] wrote:

Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded

The TRApplicationModel works but that’s about it.

Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator. 

Regards,

@+Maarten,
<screengraphicscontext-newcairocontextwhile.st>

Le 29 juin 2015 à 18:29, Alexandre Bergel [hidden email] a écrit :

Hi Bernhard,

Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
-=-=-=-=-=-=-=-=-=
visualnc.im created at September 26, 2014 10:27:43 AM
Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
-=-=-=-=-=-=-=-=-=

I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?

Cheers,
Alexandre

On Jun 26, 2015, at 5:39 PM, Bernhard Höfner [hidden email] wrote:

Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?

I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".

When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.

Regards, Bernhard
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc




_______________________________________________
vwnc mailing list

[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
Magnus Schwarz * certified Scrum Master / Smalltalk architect * 
[hidden email]

phone:+49 231 97599-0 * fax:+49 231 97599-20
Georg Heeg eK Dortmund
Handelsregister: Amtsgericht Dortmund  A 12812
---------------------------------------------------
PGP PUBLIC KEY BLOCK via 
http://www.heeg.de/~magnus 
_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




-- 
Magnus Schwarz * certified Scrum Master / Smalltalk architect * [hidden email]
phone:+49 231 97599-0 * fax:+49 231 97599-20
Georg Heeg eK Dortmund
Handelsregister: Amtsgericht Dortmund  A 12812
---------------------------------------------------
PGP PUBLIC KEY BLOCK via http://www.heeg.de/~magnus 

_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
Oh, the integration with OpenStreetMap. No, it is supported in VisualWorks.

Cheers,
Alexandre

> On Jul 1, 2015, at 3:10 PM, Magnus Schwarz <[hidden email]> wrote:
>
> How about:
>
>
>  | v map e paris |
>     v := RTView new.
>     map := RTOSM new.
>     e := map element.
>
>
>     v add: e.
>
>     paris := 48.8567 @ 2.3508.
>    
>     v @ RTDraggableView.
>    
>     v canvas camera translateTo: (map latLonToRoassal: paris).
>     v canvas camera noInitializationWhenOpen.
>     v canvas camera scale: 20.
>      v open.
>
> Am 01.07.2015 um 15:02 schrieb Alexandre Bergel:
>> This is really odd.
>>
>> Which map example are you referring to? RTMapBuilder? We have no problem on our machines (a windows and a mac).
>>
>> Will you be at the Camp Smalltalk?
>>
>> <Mail Attachment.png>
>>
>>
>>        
>> | b |
>>  b := RTMapBuilder new.
>>  
>>  b countries: RTMapBuilder countries.
>>  b cities: #(
>>  #('New York City' 8337000)
>>  #('Washington, D.C.' 632323)
>>  #('Paris' 2211000)
>>  #('Santiago' 6027000)
>>  #('Shanghai' 23710000))
>>  named: [ :c | c at: 1 ].
>>  
>>  b cities withPopup.
>>  b cities shape
>>  size: [ :c | (c at: 2)/300000 + 10 ];
>>  color: (Color red alpha: 0.5).
>>  
>>  b routes
>>  from: 'Paris' toAll: #('Santiago' 'New York City' 'Washington, D.C.' 'Shanghai');
>>  color: Color blue;
>>  withPopup: #lengthString.
>>  
>>  b color: Color veryVeryLightGray.
>>  b open.
>>
>> Cheers,
>> Alexandre
>>
>>
>>> On Jul 1, 2015, at 4:00 AM, Magnus Schwarz <[hidden email]> wrote:
>>>
>>> I wonder whether this will be sufficient - we tried it out, too, and there were several classes missing which did not come from VW (the prefix of the class names was not common to VW).           We managed to circumvent some of them, but finally gave up.
>>> BTW: We especially tried to get this "maps" example up and running.
>>> May it be that you have some compatibility package preloaded which is missing from the public repository?
>>>
>>> Regards,
>>> Magnus Schwarz
>>>
>>> Am 30.06.2015 um 23:14 schrieb Alexandre Bergel:
>>>> Okay!
>>>> Something that may be key here, is to make sure you install Cairo when you install VW.
>>>> You have to choose "customized installation” for this.
>>>>
>>>> Cheers,
>>>> Alexandre
>>>> --
>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>> Alexandre Bergel  http://www.bergel.eu
>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>
>>>>
>>>>
>>>>> On Jun 30, 2015, at 5:59 PM, Bernhard Höfner <[hidden email]> wrote:
>>>>>
>>>>> Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
>>>>> Regards, Bernhard
>>>>>
>>>>> Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:
>>>>>
>>>>>> Hi Maarten,
>>>>>>
>>>>>> This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
>>>>>> I am not sure how I can help more. Will you be at esug?
>>>>>>
>>>>>> Cheers,
>>>>>> Alexandre
>>>>>> --
>>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:
>>>>>>>
>>>>>>> Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded
>>>>>>>
>>>>>>> The TRApplicationModel works but that’s about it.
>>>>>>>
>>>>>>> Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> @+Maarten,
>>>>>>> <screengraphicscontext-newcairocontextwhile.st>
>>>>>>>
>>>>>>>> Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :
>>>>>>>>
>>>>>>>> Hi Bernhard,
>>>>>>>>
>>>>>>>> Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
>>>>>>>> -=-=-=-=-=-=-=-=-=
>>>>>>>> visualnc.im created at September 26, 2014 10:27:43 AM
>>>>>>>> Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
>>>>>>>> Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
>>>>>>>> -=-=-=-=-=-=-=-=-=
>>>>>>>>
>>>>>>>> I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?
>>>>>>>>
>>>>>>>> Cheers,
>>>>>>>> Alexandre
>>>>>>>>
>>>>>>>>> On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:
>>>>>>>>>
>>>>>>>>> Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?
>>>>>>>>>
>>>>>>>>> I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
>>>>>>>>> I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
>>>>>>>>> When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".
>>>>>>>>>
>>>>>>>>> When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.
>>>>>>>>>
>>>>>>>>> Regards, Bernhard
>>>>>>>>> _______________________________________________
>>>>>>>>> vwnc mailing list
>>>>>>>>> [hidden email]
>>>>>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>>>>>
>>>>>>>> --
>>>>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> vwnc mailing list
>>>>>>>> [hidden email]
>>>>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> vwnc mailing list
>>>>>> [hidden email]
>>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> vwnc mailing list
>>>>
>>>> [hidden email]
>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>
>>> --
>>> Magnus Schwarz * certified Scrum Master / Smalltalk architect *
>>> mailto:[hidden email]
>>>
>>> phone:+49 231 97599-0 * fax:+49 231 97599-20
>>> Georg Heeg eK Dortmund
>>> Handelsregister: Amtsgericht Dortmund  A 12812
>>> ---------------------------------------------------
>>> PGP PUBLIC KEY BLOCK via
>>> http://www.heeg.de/~magnus 
>>> _______________________________________________
>>> vwnc mailing list
>>> [hidden email]
>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>
>> --
>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>> Alexandre Bergel  http://www.bergel.eu
>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>
>>
>>
>
> --
> Magnus Schwarz * certified Scrum Master / Smalltalk architect *
> mailto:[hidden email]
>
> phone:+49 231 97599-0 * fax:+49 231 97599-20
> Georg Heeg eK Dortmund
> Handelsregister: Amtsgericht Dortmund  A 12812
> ---------------------------------------------------
> PGP PUBLIC KEY BLOCK via
> http://www.heeg.de/~magnus 

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
It is _not_ supported in VW I meant to say.
However, this is important for you, then we should discuss.

Will you be at ESUG? Are you coming to the Roassal CampSmalltalk on Sunday?

Alexandre


> On Jul 3, 2015, at 1:29 PM, Alexandre Bergel <[hidden email]> wrote:
>
> Oh, the integration with OpenStreetMap. No, it is supported in VisualWorks.
>
> Cheers,
> Alexandre
>
>> On Jul 1, 2015, at 3:10 PM, Magnus Schwarz <[hidden email]> wrote:
>>
>> How about:
>>
>>
>> | v map e paris |
>>    v := RTView new.
>>    map := RTOSM new.
>>    e := map element.
>>
>>
>>    v add: e.
>>
>>    paris := 48.8567 @ 2.3508.
>>
>>    v @ RTDraggableView.
>>
>>    v canvas camera translateTo: (map latLonToRoassal: paris).
>>    v canvas camera noInitializationWhenOpen.
>>    v canvas camera scale: 20.
>>     v open.
>>
>> Am 01.07.2015 um 15:02 schrieb Alexandre Bergel:
>>> This is really odd.
>>>
>>> Which map example are you referring to? RTMapBuilder? We have no problem on our machines (a windows and a mac).
>>>
>>> Will you be at the Camp Smalltalk?
>>>
>>> <Mail Attachment.png>
>>>
>>>
>>>
>>> | b |
>>> b := RTMapBuilder new.
>>>
>>> b countries: RTMapBuilder countries.
>>> b cities: #(
>>> #('New York City' 8337000)
>>> #('Washington, D.C.' 632323)
>>> #('Paris' 2211000)
>>> #('Santiago' 6027000)
>>> #('Shanghai' 23710000))
>>> named: [ :c | c at: 1 ].
>>>
>>> b cities withPopup.
>>> b cities shape
>>> size: [ :c | (c at: 2)/300000 + 10 ];
>>> color: (Color red alpha: 0.5).
>>>
>>> b routes
>>> from: 'Paris' toAll: #('Santiago' 'New York City' 'Washington, D.C.' 'Shanghai');
>>> color: Color blue;
>>> withPopup: #lengthString.
>>>
>>> b color: Color veryVeryLightGray.
>>> b open.
>>>
>>> Cheers,
>>> Alexandre
>>>
>>>
>>>> On Jul 1, 2015, at 4:00 AM, Magnus Schwarz <[hidden email]> wrote:
>>>>
>>>> I wonder whether this will be sufficient - we tried it out, too, and there were several classes missing which did not come from VW (the prefix of the class names was not common to VW).           We managed to circumvent some of them, but finally gave up.
>>>> BTW: We especially tried to get this "maps" example up and running.
>>>> May it be that you have some compatibility package preloaded which is missing from the public repository?
>>>>
>>>> Regards,
>>>> Magnus Schwarz
>>>>
>>>> Am 30.06.2015 um 23:14 schrieb Alexandre Bergel:
>>>>> Okay!
>>>>> Something that may be key here, is to make sure you install Cairo when you install VW.
>>>>> You have to choose "customized installation” for this.
>>>>>
>>>>> Cheers,
>>>>> Alexandre
>>>>> --
>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>
>>>>>
>>>>>
>>>>>> On Jun 30, 2015, at 5:59 PM, Bernhard Höfner <[hidden email]> wrote:
>>>>>>
>>>>>> Thank you all for the hints, I will try to install VW 8.01 the next days and will tell the results.
>>>>>> Regards, Bernhard
>>>>>>
>>>>>> Am 30.06.2015 um 21:58 schrieb Alexandre Bergel <[hidden email]>:
>>>>>>
>>>>>>> Hi Maarten,
>>>>>>>
>>>>>>> This is odd. I have just installed VW 8.0.1pul on my mac, and I had no problem to run Roassal. Everything goes smoothly.
>>>>>>> I am not sure how I can help more. Will you be at esug?
>>>>>>>
>>>>>>> Cheers,
>>>>>>> Alexandre
>>>>>>> --
>>>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> On Jun 30, 2015, at 5:20 AM, Maarten Mostert <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> Just loaded Rossla2 full on OS X and 8.01 and OS X fix loaded
>>>>>>>>
>>>>>>>> The TRApplicationModel works but that’s about it.
>>>>>>>>
>>>>>>>> Notice that you might need the additional extra Cairo fix (if you see nothing in a Cairo View), in my work I needed to this of from 8.0 It basically works like an extra initiator.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> @+Maarten,
>>>>>>>> <screengraphicscontext-newcairocontextwhile.st>
>>>>>>>>
>>>>>>>>> Le 29 juin 2015 à 18:29, Alexandre Bergel <[hidden email]> a écrit :
>>>>>>>>>
>>>>>>>>> Hi Bernhard,
>>>>>>>>>
>>>>>>>>> Strange. I have just tried with 8.0pul, and no windows appear. In case it helps, the transcript shows the following:
>>>>>>>>> -=-=-=-=-=-=-=-=-=
>>>>>>>>> visualnc.im created at September 26, 2014 10:27:43 AM
>>>>>>>>> Autoloading CairoGraphics from $(VISUALWORKS)/preview/cairo/CairoGraphics.pcl
>>>>>>>>> Autoloading Weaklings from $(VISUALWORKS)/contributed/Weaklings.pcl
>>>>>>>>> -=-=-=-=-=-=-=-=-=
>>>>>>>>>
>>>>>>>>> I am running on OSX. And I selected Cairo when installing VisualWorks. Which setting do you have?
>>>>>>>>>
>>>>>>>>> Cheers,
>>>>>>>>> Alexandre
>>>>>>>>>
>>>>>>>>>> On Jun 26, 2015, at 5:39 PM, Bernhard Höfner <[hidden email]> wrote:
>>>>>>>>>>
>>>>>>>>>> Is there anyone who can give a dummy like me a short recipe to start the Roassal examples as shown in the video  https://www.youtube.com/watch?v=OpzoPOdLMMY?
>>>>>>>>>>
>>>>>>>>>> I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
>>>>>>>>>> I choosed the newest version 2.21. When it ask for loading cairo, I coosed the newest Version 7.9 - 12.
>>>>>>>>>> When opening the example2015 as shown in the video, the system answers an "unhandled exception: Message not understood: #nsBitmap".
>>>>>>>>>>
>>>>>>>>>> When pre loading RBSUnitExtension (8.0 - 5) parcel as proposed at the cincom page, an "unhandled exception: Message not understood: #invalidateIntrinsicContentSize" occurs as soon I try to open a System browser.
>>>>>>>>>>
>>>>>>>>>> Regards, Bernhard
>>>>>>>>>> _______________________________________________
>>>>>>>>>> vwnc mailing list
>>>>>>>>>> [hidden email]
>>>>>>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> vwnc mailing list
>>>>>>>>> [hidden email]
>>>>>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> vwnc mailing list
>>>>>>> [hidden email]
>>>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> vwnc mailing list
>>>>>
>>>>> [hidden email]
>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>>
>>>> --
>>>> Magnus Schwarz * certified Scrum Master / Smalltalk architect *
>>>> mailto:[hidden email]
>>>>
>>>> phone:+49 231 97599-0 * fax:+49 231 97599-20
>>>> Georg Heeg eK Dortmund
>>>> Handelsregister: Amtsgericht Dortmund  A 12812
>>>> ---------------------------------------------------
>>>> PGP PUBLIC KEY BLOCK via
>>>> http://www.heeg.de/~magnus 
>>>> _______________________________________________
>>>> vwnc mailing list
>>>> [hidden email]
>>>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>>>
>>> --
>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>> Alexandre Bergel  http://www.bergel.eu
>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>
>>>
>>>
>>
>> --
>> Magnus Schwarz * certified Scrum Master / Smalltalk architect *
>> mailto:[hidden email]
>>
>> phone:+49 231 97599-0 * fax:+49 231 97599-20
>> Georg Heeg eK Dortmund
>> Handelsregister: Amtsgericht Dortmund  A 12812
>> ---------------------------------------------------
>> PGP PUBLIC KEY BLOCK via
>> http://www.heeg.de/~magnus 
>
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel  http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
> _______________________________________________
> vwnc mailing list
> [hidden email]
> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

Bernhard Höfner
In reply to this post by Holger Kleinsorgen
ok, I got it and it was my mistake! I installed vwnc 8.01 custom installation (including Cairo) and everything is fine now. I think, the main mistake was, that I used before the same "Visual Works Project.app" as with my version 7.10 and the system started the 7.10 image instead of the 8.0 and I did not realize it because I deleted the welcome window before reading it. I am sorry for my mistake. Thank you all.
Regards, Bernhard

Am 30.06.2015 um 12:49 schrieb Holger Kleinsorgen <[hidden email]>:

> Bernhard Höfner-2 wrote
>> Is there anyone who can give a dummy like me a short recipe to start the
>> Roassal examples as shown in the video
>> https://www.youtube.com/watch?v=OpzoPOdLMMY?
>>
>> I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
>> I choosed the newest version 2.21. When it ask for loading cairo, I coosed
>> the newest Version 7.9 - 12.
>> When opening the example2015 as shown in the video, the system answers an
>> "unhandled exception: Message not understood: #nsBitmap".
>
> Load Cairo from VW parcel first (it should be version >= 8.0 - 1), instead
> of loading the old 7.9 - 12 from the public Store repository.
>
>
>
> --
> View this message in context: http://forum.world.st/Roassal2-tp4834349p4834833.html
> Sent from the VisualWorks mailing list archive at Nabble.com.
>
> _______________________________________________
> vwnc mailing list
> [hidden email]
> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc


_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
Reply | Threaded
Open this post in threaded view
|

Re: Roassal2

abergel
No problem at all.
Happy to see the problem solved :-)

See you this sunday!

Alexandre


> On Jul 6, 2015, at 10:01 PM, Bernhard Höfner <[hidden email]> wrote:
>
> ok, I got it and it was my mistake! I installed vwnc 8.01 custom installation (including Cairo) and everything is fine now. I think, the main mistake was, that I used before the same "Visual Works Project.app" as with my version 7.10 and the system started the 7.10 image instead of the 8.0 and I did not realize it because I deleted the welcome window before reading it. I am sorry for my mistake. Thank you all.
> Regards, Bernhard
>
> Am 30.06.2015 um 12:49 schrieb Holger Kleinsorgen <[hidden email]>:
>
>> Bernhard Höfner-2 wrote
>>> Is there anyone who can give a dummy like me a short recipe to start the
>>> Roassal examples as shown in the video
>>> https://www.youtube.com/watch?v=OpzoPOdLMMY?
>>>
>>> I tried to start Roassal2 on Visualworks 8.0 as shown in the video.
>>> I choosed the newest version 2.21. When it ask for loading cairo, I coosed
>>> the newest Version 7.9 - 12.
>>> When opening the example2015 as shown in the video, the system answers an
>>> "unhandled exception: Message not understood: #nsBitmap".
>>
>> Load Cairo from VW parcel first (it should be version >= 8.0 - 1), instead
>> of loading the old 7.9 - 12 from the public Store repository.
>>
>>
>>
>> --
>> View this message in context: http://forum.world.st/Roassal2-tp4834349p4834833.html
>> Sent from the VisualWorks mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> vwnc mailing list
>> [hidden email]
>> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc
>
>
> _______________________________________________
> vwnc mailing list
> [hidden email]
> http://lists.cs.uiuc.edu/mailman/listinfo/vwnc

--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.




_______________________________________________
vwnc mailing list
[hidden email]
http://lists.cs.uiuc.edu/mailman/listinfo/vwnc