Safari on Leopard Apache post problem

> -----Original Message-----
> From: [hidden email] [mailto:seaside-
> [hidden email]] On Behalf Of Roger Whitney
> Sent: Tuesday, November 13, 2007 4:20 PM
> To: Seaside - general discussion
> Subject: [Seaside] Safari on Leopard Apache post problem
>
> I have a problem with the new Safari on Leopard (Mac OS 10.5)
> accessing a Seaside application running behind Apache and hope someone
> can shed some light on it.
>
> I am using Seaside 2.8 on VW 7.5. When I run Seaside as a standalone
> web server in VW (the tiny Web server in VW) Safari in Leopard has no
> problems accessing the Seaside application. When I run the Seaside
> application behind Apache there is no problem with Firefox, Opera and
> older versions of Safari accessing the application.
>
> When I use Safari 3.0.4, which comes on Leopard, there are problems
> with posts from a seaside page. The problem occurs not only on my code
> but in Functional Seaside Test Suite examples. When I click on a
> button to submit a form the bowser says it is contacting the server
> and seems to wait for ever without timing out. On the server side I
> first get the POST request. According to the log file 15 seconds later
> I get a GET request. The server and client are running on the same
> machine (Dual Core), so there is no network delay. A few seconds later
> a second GET request comes from Safari. If I stop the request from
> Safari and then have it reload the page I do get the reply to the

>
> Since Safari 3.0.4 does work when talking directly to the VW web
> server there is some problem with Safari 3.0.4 and Apache. Does anyone
> have any idea how to configure Apache to avoid this? Unfortunately
> some of my users can only access port 80, so I have to run behind
> Apache.
>
>
>
> ----
> Roger Whitney              Department of Computer Science
> [hidden email]        San Diego State University
> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> That's pretty much the same configuration I'm using and we haven't  
> seen
> this problem yet. Could you perhaps post your Apache config so we  
> could
> compare?
>
>
>> -----Original Message-----
>> From: [hidden email] [mailto:seaside-
>> [hidden email]] On Behalf Of Roger Whitney
>> Sent: Tuesday, November 13, 2007 4:20 PM
>> To: Seaside - general discussion
>> Subject: [Seaside] Safari on Leopard Apache post problem
>>
>> I have a problem with the new Safari on Leopard (Mac OS 10.5)
>> accessing a Seaside application running behind Apache and hope  
>> someone
>> can shed some light on it.
>>
>> I am using Seaside 2.8 on VW 7.5. When I run Seaside as a standalone
>> web server in VW (the tiny Web server in VW) Safari in Leopard has no
>> problems accessing the Seaside application. When I run the Seaside
>> application behind Apache there is no problem with Firefox, Opera and
>> older versions of Safari accessing the application.
>>
>> When I use Safari 3.0.4, which comes on Leopard, there are problems
>> with posts from a seaside page. The problem occurs not only on my  
>> code
>> but in Functional Seaside Test Suite examples. When I click on a
>> button to submit a form the bowser says it is contacting the server
>> and seems to wait for ever without timing out. On the server side I
>> first get the POST request. According to the log file 15 seconds  
>> later
>> I get a GET request. The server and client are running on the same
>> machine (Dual Core), so there is no network delay. A few seconds  
>> later
>> a second GET request comes from Safari. If I stop the request from
>> Safari and then have it reload the page I do get the reply to the
> post.
>>
>> Since Safari 3.0.4 does work when talking directly to the VW web
>> server there is some problem with Safari 3.0.4 and Apache. Does  
>> anyone
>> have any idea how to configure Apache to avoid this? Unfortunately
>> some of my users can only access port 80, so I have to run behind
>> Apache.
>>
>>
>>
>> ----
>> Roger Whitney              Department of Computer Science
>> [hidden email]        San Diego State University
>> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>>
>>
>> _______________________________________________
>> seaside mailing list
>> [hidden email]
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>

>
>
> Who would I contact to ask about updating info on the Seaside website?
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>

> Hmm, okay, not quite apples to apples. I've always used a simple  
> proxy to a tiny http server or swazoo, not the nasty perl relay hack  
> to ip listener. Any chance you could give that a try? Its a whole  
> lot simpler to set up, can't remember the exact link to a sample  
> though.
>
> Cheers!
>
> -Boris
> (Sent from a BlackBerry)
>
> ----- Original Message -----
> From: [hidden email] <[hidden email]
> >
> To: Seaside - general discussion <[hidden email]>
> Sent: Tue Nov 13 20:38:03 2007
> Subject: Re: [Seaside] Safari on Leopard Apache post problem
>
> Boris,
>         On the Leopard machine I start with stock Apache config file  
> that
> ships with Leopard (see below) and add in a separate conf file that is
> included in the httpd.conf file:
> ---
> ScriptAlias /scandia/2008/ "/Library/WebServer/CGI-Executables/
> scandia.pl/"
>
> <Directory /Library/WebServer/CGI-Executables/>
>          Options +FollowSymLinks
>          RewriteEngine on
>          RewriteCond %{HTTP:Authorization} ^(.*)
>          RewriteRule .* - [E=HTTP_AUTHORIZATION:%1]
> </Directory>
> ---
>
> (Aside: the rewrite rules above do not work to pass the http
> authorization requests). The scandia.pl file is the perl relay file
> $visualHome/waveserver/waverelays/perl/visualworks.pl.  The /Library/
> WebServer/CGI-Executables is Apple's CGI-bin directory.
>
> The httpd.conf file with some comments removed:
> ---
> ServerRoot "/usr"
>
> Listen 80
>
> LoadModule authn_file_module libexec/apache2/mod_authn_file.so
> LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
> LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
> LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
> LoadModule authn_default_module libexec/apache2/mod_authn_default.so
> LoadModule authz_host_module libexec/apache2/mod_authz_host.so
> LoadModule authz_groupfile_module libexec/apache2/
> mod_authz_groupfile.so
> LoadModule authz_user_module libexec/apache2/mod_authz_user.so
> LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
> LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
> LoadModule authz_default_module libexec/apache2/mod_authz_default.so
> LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
> LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
> LoadModule cache_module libexec/apache2/mod_cache.so
> LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so
> LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so
> LoadModule dbd_module libexec/apache2/mod_dbd.so
> LoadModule dumpio_module libexec/apache2/mod_dumpio.so
> LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
> LoadModule include_module libexec/apache2/mod_include.so
> LoadModule filter_module libexec/apache2/mod_filter.so
> LoadModule deflate_module libexec/apache2/mod_deflate.so
> LoadModule log_config_module libexec/apache2/mod_log_config.so
> LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
> LoadModule logio_module libexec/apache2/mod_logio.so
> LoadModule env_module libexec/apache2/mod_env.so
> LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
> LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so
> LoadModule expires_module libexec/apache2/mod_expires.so
> LoadModule headers_module libexec/apache2/mod_headers.so
> LoadModule ident_module libexec/apache2/mod_ident.so
> LoadModule usertrack_module libexec/apache2/mod_usertrack.so
> #LoadModule unique_id_module libexec/apache2/mod_unique_id.so
> LoadModule setenvif_module libexec/apache2/mod_setenvif.so
> LoadModule version_module libexec/apache2/mod_version.so
> LoadModule proxy_module libexec/apache2/mod_proxy.so
> LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
> LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
> LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
> LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
> LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
> LoadModule ssl_module libexec/apache2/mod_ssl.so
> LoadModule mime_module libexec/apache2/mod_mime.so
> LoadModule dav_module libexec/apache2/mod_dav.so
> LoadModule status_module libexec/apache2/mod_status.so
> LoadModule autoindex_module libexec/apache2/mod_autoindex.so
> LoadModule asis_module libexec/apache2/mod_asis.so
> LoadModule info_module libexec/apache2/mod_info.so
> LoadModule cgi_module libexec/apache2/mod_cgi.so
> LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
> LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
> LoadModule negotiation_module libexec/apache2/mod_negotiation.so
> LoadModule dir_module libexec/apache2/mod_dir.so
> LoadModule imagemap_module libexec/apache2/mod_imagemap.so
> LoadModule actions_module libexec/apache2/mod_actions.so
> LoadModule speling_module libexec/apache2/mod_speling.so
> LoadModule userdir_module libexec/apache2/mod_userdir.so
> LoadModule alias_module libexec/apache2/mod_alias.so
> LoadModule rewrite_module libexec/apache2/mod_rewrite.so
> LoadModule bonjour_module     libexec/apache2/mod_bonjour.so
> #LoadModule php5_module        libexec/apache2/libphp5.so
> #LoadModule fastcgi_module     libexec/apache2/mod_fastcgi.so
>
> <IfModule !mpm_netware_module>
>
> User www
> Group www
> </IfModule>
>
>
> ServerAdmin [hidden email]
>
>
> DocumentRoot "/Library/WebServer/Documents"
>
> <Directory />
>      Options FollowSymLinks
>      AllowOverride None
>      Order deny,allow
>      Deny from all
> </Directory>
>
> <Directory "/Library/WebServer/Documents">
>      Options Indexes FollowSymLinks MultiViews
>      AllowOverride None
>      Order allow,deny
>      Allow from all
>
> </Directory>
>
> <IfModule dir_module>
>      DirectoryIndex index.html
> </IfModule>
>
>
> <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
>      Order allow,deny
>      Deny from all
>      Satisfy All
> </FilesMatch>
>
>
> <Files "rsrc">
>      Order allow,deny
>      Deny from all
>      Satisfy All
> </Files>
> <DirectoryMatch ".*\.\.namedfork">
>      Order allow,deny
>      Deny from all
>      Satisfy All
> </DirectoryMatch>
>
>
> ErrorLog /private/var/log/apache2/error_log
>
> LogLevel warn
>
> <IfModule log_config_module>
>
>      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> Agent}i\"" combined
>      LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
>      <IfModule logio_module>
>        # You need to enable mod_logio.c to use %I and %O
>        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> Agent}i\" %I %O" combinedio
>      </IfModule>
>
>      #
>      # The location and format of the access logfile (Common Logfile
> Format).
>      # If you do not define any access logfiles within a <VirtualHost>
>      # container, they will be logged here.  Contrariwise, if you *do*
>      # define per-<VirtualHost> access logfiles, transactions will be
>      # logged therein and *not* in this file.
>      #
>      CustomLog /private/var/log/apache2/access_log common
>
>      #
>      # If you prefer a logfile with access, agent, and referer
> information
>      # (Combined Logfile Format) you can use the following directive.
>      #
>      #CustomLog /private/var/log/apache2/access_log combined
> </IfModule>
>
> <IfModule alias_module>
>
>      #
>      # ScriptAlias: This controls which directories contain server
> scripts.
>      # ScriptAliases are essentially the same as Aliases, except that
>      # documents in the target directory are treated as applications  
> and
>      # run by the server when requested rather than as documents sent
> to the
>      # client.  The same rules about trailing "/" apply to ScriptAlias
>      # directives as to Alias.
>      #
>      ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/
> WebServer/CGI-Executables/$1"
>
> </IfModule>
>
> <IfModule cgid_module>
>
> </IfModule>
>
> #
> # "/Library/WebServer/CGI-Executables" should be changed to whatever
> your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "/Library/WebServer/CGI-Executables">
>      AllowOverride None
>      Options None
>      Order allow,deny
>      Allow from all
> </Directory>
>
> DefaultType text/plain
>
> <IfModule mime_module>
>
>      TypesConfig /private/etc/apache2/mime.types
>
>      AddType application/x-compress .Z
>      AddType application/x-gzip .gz .tgz
>
>      #
>      # AddHandler allows you to map certain file extensions to
> "handlers":
>      # actions unrelated to filetype. These can be either built into
> the server
>      # or added with the Action directive (see below)
>      #
>      # To use CGI scripts outside of ScriptAliased directories:
>      # (You will also need to add "ExecCGI" to the "Options"  
> directive.)
>      #
>      #AddHandler cgi-script .cgi
>
>      # For type maps (negotiated resources):
>      #AddHandler type-map var
>
>      #
>      # Filters allow you to process content before it is sent to the
> client.
>      #
>      # To parse .shtml files for server-side includes (SSI):
>      # (You will also need to add "Includes" to the "Options"
> directive.)
>      #
>      #AddType text/html .shtml
>      #AddOutputFilter INCLUDES .shtml
> </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints
> from the
> # contents of the file itself to determine its type.  The  
> MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile /private/etc/apache2/magic
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://www.example.com/subscription_info.html
> #
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files.  This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
>
> # Supplemental configuration
> #
> # The configuration files in the /private/etc/apache2/extra/ directory
> can be
> # included to add extra features or to modify the default
> configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
>
> # Server-pool management (MPM specific)
> Include /private/etc/apache2/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> Include /private/etc/apache2/extra/httpd-autoindex.conf
>
> # Language settings
> Include /private/etc/apache2/extra/httpd-languages.conf
>
> # User home directories
> Include /private/etc/apache2/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include /private/etc/apache2/extra/httpd-info.conf
>
> # Virtual hosts
> #Include /private/etc/apache2/extra/httpd-vhosts.conf
>
> # Local access to the Apache HTTP Server Manual
> Include /private/etc/apache2/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include /private/etc/apache2/extra/httpd-dav.conf
>
> # Various default settings
> #Include /private/etc/apache2/extra/httpd-default.conf
>
> # Secure (SSL/TLS) connections
> #Include /private/etc/apache2/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> #       starting without SSL on platforms with no /dev/random  
> equivalent
> #       but a statically compiled-in mod_ssl.
> #
> <IfModule ssl_module>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> </IfModule>
>
> Include /private/etc/apache2/other/*.conf
> On Nov 13, 2007, at 6:22 PM, Boris Popov wrote:
>
> > That's pretty much the same configuration I'm using and we haven't
> > seen
> > this problem yet. Could you perhaps post your Apache config so we
> > could
> > compare?
> >
> >
> >> -----Original Message-----
> >> From: [hidden email] [mailto:seaside-
> >> [hidden email]] On Behalf Of Roger Whitney
> >> Sent: Tuesday, November 13, 2007 4:20 PM
> >> To: Seaside - general discussion
> >> Subject: [Seaside] Safari on Leopard Apache post problem
> >>
> >> I have a problem with the new Safari on Leopard (Mac OS 10.5)
> >> accessing a Seaside application running behind Apache and hope
> >> someone
> >> can shed some light on it.
> >>
> >> I am using Seaside 2.8 on VW 7.5. When I run Seaside as a  
> standalone
> >> web server in VW (the tiny Web server in VW) Safari in Leopard  
> has no
> >> problems accessing the Seaside application. When I run the Seaside
> >> application behind Apache there is no problem with Firefox, Opera  
> and
> >> older versions of Safari accessing the application.
> >>
> >> When I use Safari 3.0.4, which comes on Leopard, there are problems
> >> with posts from a seaside page. The problem occurs not only on my
> >> code
> >> but in Functional Seaside Test Suite examples. When I click on a
> >> button to submit a form the bowser says it is contacting the server
> >> and seems to wait for ever without timing out. On the server side I
> >> first get the POST request. According to the log file 15 seconds
> >> later
> >> I get a GET request. The server and client are running on the same
> >> machine (Dual Core), so there is no network delay. A few seconds
> >> later
> >> a second GET request comes from Safari. If I stop the request from
> >> Safari and then have it reload the page I do get the reply to the
> > post.
> >>
> >> Since Safari 3.0.4 does work when talking directly to the VW web
> >> server there is some problem with Safari 3.0.4 and Apache. Does
> >> anyone
> >> have any idea how to configure Apache to avoid this? Unfortunately
> >> some of my users can only access port 80, so I have to run behind
> >> Apache.
> >>
> >>
> >>
> >> ----
> >> Roger Whitney              Department of Computer Science
> >> [hidden email]        San Diego State University
> >> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
> >>
> >>
> >> _______________________________________________
> >> seaside mailing list
> >> [hidden email]
> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> > _______________________________________________
> > seaside mailing list
> > [hidden email]
> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >
> >
>
>
>
> ----
> Roger Whitney              Department of Computer Science
> [hidden email]        San Diego State University
> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

> Boris,
> I found your blog entry on this. I will give it a try. It sure  
> looks more complex than what I was doing  since I did not have to  
> write the perl relay.
>
> On Nov 14, 2007, at 12:59 AM, Boris Popov wrote:
>
>> Hmm, okay, not quite apples to apples. I've always used a simple  
>> proxy to a tiny http server or swazoo, not the nasty perl relay  
>> hack to ip listener. Any chance you could give that a try? Its a  
>> whole lot simpler to set up, can't remember the exact link to a  
>> sample though.
>>
>> Cheers!
>>
>> -Boris
>> (Sent from a BlackBerry)
>>
>> ----- Original Message -----
>> From: [hidden email] <seaside-
>> [hidden email]>
>> To: Seaside - general discussion <[hidden email]>
>> Sent: Tue Nov 13 20:38:03 2007
>> Subject: Re: [Seaside] Safari on Leopard Apache post problem
>>
>> Boris,
>>         On the Leopard machine I start with stock Apache config  
>> file that
>> ships with Leopard (see below) and add in a separate conf file  
>> that is
>> included in the httpd.conf file:
>> ---
>> ScriptAlias /scandia/2008/ "/Library/WebServer/CGI-Executables/
>> scandia.pl/"
>>
>> <Directory /Library/WebServer/CGI-Executables/>
>>          Options +FollowSymLinks
>>          RewriteEngine on
>>          RewriteCond %{HTTP:Authorization} ^(.*)
>>          RewriteRule .* - [E=HTTP_AUTHORIZATION:%1]
>> </Directory>
>> ---
>>
>> (Aside: the rewrite rules above do not work to pass the http
>> authorization requests). The scandia.pl file is the perl relay file
>> $visualHome/waveserver/waverelays/perl/visualworks.pl.  The /Library/
>> WebServer/CGI-Executables is Apple's CGI-bin directory.
>>
>> The httpd.conf file with some comments removed:
>> ---
>> ServerRoot "/usr"
>>
>> Listen 80
>>
>> LoadModule authn_file_module libexec/apache2/mod_authn_file.so
>> LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
>> LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
>> LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
>> LoadModule authn_default_module libexec/apache2/mod_authn_default.so
>> LoadModule authz_host_module libexec/apache2/mod_authz_host.so
>> LoadModule authz_groupfile_module libexec/apache2/
>> mod_authz_groupfile.so
>> LoadModule authz_user_module libexec/apache2/mod_authz_user.so
>> LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
>> LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
>> LoadModule authz_default_module libexec/apache2/mod_authz_default.so
>> LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
>> LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
>> LoadModule cache_module libexec/apache2/mod_cache.so
>> LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so
>> LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so
>> LoadModule dbd_module libexec/apache2/mod_dbd.so
>> LoadModule dumpio_module libexec/apache2/mod_dumpio.so
>> LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
>> LoadModule include_module libexec/apache2/mod_include.so
>> LoadModule filter_module libexec/apache2/mod_filter.so
>> LoadModule deflate_module libexec/apache2/mod_deflate.so
>> LoadModule log_config_module libexec/apache2/mod_log_config.so
>> LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
>> LoadModule logio_module libexec/apache2/mod_logio.so
>> LoadModule env_module libexec/apache2/mod_env.so
>> LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
>> LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so
>> LoadModule expires_module libexec/apache2/mod_expires.so
>> LoadModule headers_module libexec/apache2/mod_headers.so
>> LoadModule ident_module libexec/apache2/mod_ident.so
>> LoadModule usertrack_module libexec/apache2/mod_usertrack.so
>> #LoadModule unique_id_module libexec/apache2/mod_unique_id.so
>> LoadModule setenvif_module libexec/apache2/mod_setenvif.so
>> LoadModule version_module libexec/apache2/mod_version.so
>> LoadModule proxy_module libexec/apache2/mod_proxy.so
>> LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
>> LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
>> LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
>> LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
>> LoadModule proxy_balancer_module libexec/apache2/
>> mod_proxy_balancer.so
>> LoadModule ssl_module libexec/apache2/mod_ssl.so
>> LoadModule mime_module libexec/apache2/mod_mime.so
>> LoadModule dav_module libexec/apache2/mod_dav.so
>> LoadModule status_module libexec/apache2/mod_status.so
>> LoadModule autoindex_module libexec/apache2/mod_autoindex.so
>> LoadModule asis_module libexec/apache2/mod_asis.so
>> LoadModule info_module libexec/apache2/mod_info.so
>> LoadModule cgi_module libexec/apache2/mod_cgi.so
>> LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
>> LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
>> LoadModule negotiation_module libexec/apache2/mod_negotiation.so
>> LoadModule dir_module libexec/apache2/mod_dir.so
>> LoadModule imagemap_module libexec/apache2/mod_imagemap.so
>> LoadModule actions_module libexec/apache2/mod_actions.so
>> LoadModule speling_module libexec/apache2/mod_speling.so
>> LoadModule userdir_module libexec/apache2/mod_userdir.so
>> LoadModule alias_module libexec/apache2/mod_alias.so
>> LoadModule rewrite_module libexec/apache2/mod_rewrite.so
>> LoadModule bonjour_module     libexec/apache2/mod_bonjour.so
>> #LoadModule php5_module        libexec/apache2/libphp5.so
>> #LoadModule fastcgi_module     libexec/apache2/mod_fastcgi.so
>>
>> <IfModule !mpm_netware_module>
>>
>> User www
>> Group www
>> </IfModule>
>>
>>
>> ServerAdmin [hidden email]
>>
>>
>> DocumentRoot "/Library/WebServer/Documents"
>>
>> <Directory />
>>      Options FollowSymLinks
>>      AllowOverride None
>>      Order deny,allow
>>      Deny from all
>> </Directory>
>>
>> <Directory "/Library/WebServer/Documents">
>>      Options Indexes FollowSymLinks MultiViews
>>      AllowOverride None
>>      Order allow,deny
>>      Allow from all
>>
>> </Directory>
>>
>> <IfModule dir_module>
>>      DirectoryIndex index.html
>> </IfModule>
>>
>>
>> <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
>>      Order allow,deny
>>      Deny from all
>>      Satisfy All
>> </FilesMatch>
>>
>>
>> <Files "rsrc">
>>      Order allow,deny
>>      Deny from all
>>      Satisfy All
>> </Files>
>> <DirectoryMatch ".*\.\.namedfork">
>>      Order allow,deny
>>      Deny from all
>>      Satisfy All
>> </DirectoryMatch>
>>
>>
>> ErrorLog /private/var/log/apache2/error_log
>>
>> LogLevel warn
>>
>> <IfModule log_config_module>
>>
>>      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
>> Agent}i\"" combined
>>      LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>
>>      <IfModule logio_module>
>>        # You need to enable mod_logio.c to use %I and %O
>>        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
>> Agent}i\" %I %O" combinedio
>>      </IfModule>
>>
>>      #
>>      # The location and format of the access logfile (Common Logfile
>> Format).
>>      # If you do not define any access logfiles within a  
>> <VirtualHost>
>>      # container, they will be logged here.  Contrariwise, if you  
>> *do*
>>      # define per-<VirtualHost> access logfiles, transactions will be
>>      # logged therein and *not* in this file.
>>      #
>>      CustomLog /private/var/log/apache2/access_log common
>>
>>      #
>>      # If you prefer a logfile with access, agent, and referer
>> information
>>      # (Combined Logfile Format) you can use the following directive.
>>      #
>>      #CustomLog /private/var/log/apache2/access_log combined
>> </IfModule>
>>
>> <IfModule alias_module>
>>
>>      #
>>      # ScriptAlias: This controls which directories contain server
>> scripts.
>>      # ScriptAliases are essentially the same as Aliases, except that
>>      # documents in the target directory are treated as  
>> applications and
>>      # run by the server when requested rather than as documents sent
>> to the
>>      # client.  The same rules about trailing "/" apply to  
>> ScriptAlias
>>      # directives as to Alias.
>>      #
>>      ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/
>> WebServer/CGI-Executables/$1"
>>
>> </IfModule>
>>
>> <IfModule cgid_module>
>>
>> </IfModule>
>>
>> #
>> # "/Library/WebServer/CGI-Executables" should be changed to whatever
>> your ScriptAliased
>> # CGI directory exists, if you have that configured.
>> #
>> <Directory "/Library/WebServer/CGI-Executables">
>>      AllowOverride None
>>      Options None
>>      Order allow,deny
>>      Allow from all
>> </Directory>
>>
>> DefaultType text/plain
>>
>> <IfModule mime_module>
>>
>>      TypesConfig /private/etc/apache2/mime.types
>>
>>      AddType application/x-compress .Z
>>      AddType application/x-gzip .gz .tgz
>>
>>      #
>>      # AddHandler allows you to map certain file extensions to
>> "handlers":
>>      # actions unrelated to filetype. These can be either built into
>> the server
>>      # or added with the Action directive (see below)
>>      #
>>      # To use CGI scripts outside of ScriptAliased directories:
>>      # (You will also need to add "ExecCGI" to the "Options"  
>> directive.)
>>      #
>>      #AddHandler cgi-script .cgi
>>
>>      # For type maps (negotiated resources):
>>      #AddHandler type-map var
>>
>>      #
>>      # Filters allow you to process content before it is sent to the
>> client.
>>      #
>>      # To parse .shtml files for server-side includes (SSI):
>>      # (You will also need to add "Includes" to the "Options"
>> directive.)
>>      #
>>      #AddType text/html .shtml
>>      #AddOutputFilter INCLUDES .shtml
>> </IfModule>
>>
>> #
>> # The mod_mime_magic module allows the server to use various hints
>> from the
>> # contents of the file itself to determine its type.  The  
>> MIMEMagicFile
>> # directive tells the module where the hint definitions are located.
>> #
>> #MIMEMagicFile /private/etc/apache2/magic
>>
>> #
>> # Customizable error responses come in three flavors:
>> # 1) plain text 2) local redirects 3) external redirects
>> #
>> # Some examples:
>> #ErrorDocument 500 "The server made a boo boo."
>> #ErrorDocument 404 /missing.html
>> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
>> #ErrorDocument 402 http://www.example.com/subscription_info.html
>> #
>>
>> #
>> # EnableMMAP and EnableSendfile: On systems that support it,
>> # memory-mapping or the sendfile syscall is used to deliver
>> # files.  This usually improves server performance, but must
>> # be turned off when serving from networked-mounted
>> # filesystems or if support for these functions is otherwise
>> # broken on your system.
>> #
>> #EnableMMAP off
>> #EnableSendfile off
>>
>> # Supplemental configuration
>> #
>> # The configuration files in the /private/etc/apache2/extra/  
>> directory
>> can be
>> # included to add extra features or to modify the default
>> configuration of
>> # the server, or you may simply copy their contents here and  
>> change as
>> # necessary.
>>
>> # Server-pool management (MPM specific)
>> Include /private/etc/apache2/extra/httpd-mpm.conf
>>
>> # Multi-language error messages
>> #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf
>>
>> # Fancy directory listings
>> Include /private/etc/apache2/extra/httpd-autoindex.conf
>>
>> # Language settings
>> Include /private/etc/apache2/extra/httpd-languages.conf
>>
>> # User home directories
>> Include /private/etc/apache2/extra/httpd-userdir.conf
>>
>> # Real-time info on requests and configuration
>> #Include /private/etc/apache2/extra/httpd-info.conf
>>
>> # Virtual hosts
>> #Include /private/etc/apache2/extra/httpd-vhosts.conf
>>
>> # Local access to the Apache HTTP Server Manual
>> Include /private/etc/apache2/extra/httpd-manual.conf
>>
>> # Distributed authoring and versioning (WebDAV)
>> #Include /private/etc/apache2/extra/httpd-dav.conf
>>
>> # Various default settings
>> #Include /private/etc/apache2/extra/httpd-default.conf
>>
>> # Secure (SSL/TLS) connections
>> #Include /private/etc/apache2/extra/httpd-ssl.conf
>> #
>> # Note: The following must must be present to support
>> #       starting without SSL on platforms with no /dev/random  
>> equivalent
>> #       but a statically compiled-in mod_ssl.
>> #
>> <IfModule ssl_module>
>> SSLRandomSeed startup builtin
>> SSLRandomSeed connect builtin
>> </IfModule>
>>
>> Include /private/etc/apache2/other/*.conf
>> On Nov 13, 2007, at 6:22 PM, Boris Popov wrote:
>>
>> > That's pretty much the same configuration I'm using and we haven't
>> > seen
>> > this problem yet. Could you perhaps post your Apache config so we
>> > could
>> > compare?
>> >
>> >
>> >> -----Original Message-----
>> >> From: [hidden email] [mailto:seaside-
>> >> [hidden email]] On Behalf Of Roger Whitney
>> >> Sent: Tuesday, November 13, 2007 4:20 PM
>> >> To: Seaside - general discussion
>> >> Subject: [Seaside] Safari on Leopard Apache post problem
>> >>
>> >> I have a problem with the new Safari on Leopard (Mac OS 10.5)
>> >> accessing a Seaside application running behind Apache and hope
>> >> someone
>> >> can shed some light on it.
>> >>
>> >> I am using Seaside 2.8 on VW 7.5. When I run Seaside as a  
>> standalone
>> >> web server in VW (the tiny Web server in VW) Safari in Leopard  
>> has no
>> >> problems accessing the Seaside application. When I run the Seaside
>> >> application behind Apache there is no problem with Firefox,  
>> Opera and
>> >> older versions of Safari accessing the application.
>> >>
>> >> When I use Safari 3.0.4, which comes on Leopard, there are  
>> problems
>> >> with posts from a seaside page. The problem occurs not only on my
>> >> code
>> >> but in Functional Seaside Test Suite examples. When I click on a
>> >> button to submit a form the bowser says it is contacting the  
>> server
>> >> and seems to wait for ever without timing out. On the server  
>> side I
>> >> first get the POST request. According to the log file 15 seconds
>> >> later
>> >> I get a GET request. The server and client are running on the same
>> >> machine (Dual Core), so there is no network delay. A few seconds
>> >> later
>> >> a second GET request comes from Safari. If I stop the request from
>> >> Safari and then have it reload the page I do get the reply to the
>> > post.
>> >>
>> >> Since Safari 3.0.4 does work when talking directly to the VW web
>> >> server there is some problem with Safari 3.0.4 and Apache. Does
>> >> anyone
>> >> have any idea how to configure Apache to avoid this? Unfortunately
>> >> some of my users can only access port 80, so I have to run behind
>> >> Apache.
>> >>
>> >>
>> >>
>> >> ----
>> >> Roger Whitney              Department of Computer Science
>> >> [hidden email]        San Diego State University
>> >> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>> >>
>> >>
>> >> _______________________________________________
>> >> seaside mailing list
>> >> [hidden email]
>> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>> > _______________________________________________
>> > seaside mailing list
>> > [hidden email]
>> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>> >
>> >
>>
>>
>>
>> ----
>> Roger Whitney              Department of Computer Science
>> [hidden email]        San Diego State University
>> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>>
>>
>> _______________________________________________
>> seaside mailing list
>> [hidden email]
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>> _______________________________________________
>> seaside mailing list
>> [hidden email]
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>
>
> ----
> Roger Whitney              Department of Computer Science
> [hidden email]        San Diego State University
> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>

> -----Original Message-----
> From: [hidden email] [mailto:seaside-
> [hidden email]] On Behalf Of Roger Whitney
> Sent: Wednesday, November 14, 2007 2:00 PM
> To: Seaside - general discussion
> Subject: Re: [Seaside] Safari on Leopard Apache post problem
>
> I can report that using the proxy does work - no more problems with
> Safari on Leopard. I ended up using two set of proxy rules. One for
> the seaside applications and another for the VW web server
> configuration pages (see below).
>
> <IfModule mod_proxy.c>
> ProxyRequests Off
> ProxyPreserveHost On
> <Proxy *>
> Order deny,allow
> Allow from all
> </Proxy>
> ProxyPass /registration/configure

> </IfModule>
>
> On Nov 14, 2007, at 9:29 AM, Roger Whitney wrote:
>
> > Boris,
> > I found your blog entry on this. I will give it a try. It sure
> > looks more complex than what I was doing  since I did not have to
> > write the perl relay.
> >
> > On Nov 14, 2007, at 12:59 AM, Boris Popov wrote:
> >
> >> Hmm, okay, not quite apples to apples. I've always used a simple
> >> proxy to a tiny http server or swazoo, not the nasty perl relay
> >> hack to ip listener. Any chance you could give that a try? Its a
> >> whole lot simpler to set up, can't remember the exact link to a
> >> sample though.
> >>
> >> Cheers!
> >>
> >> -Boris
> >> (Sent from a BlackBerry)
> >>
> >> ----- Original Message -----
> >> From: [hidden email] <seaside-
> >> [hidden email]>
> >> To: Seaside - general discussion

> >> Sent: Tue Nov 13 20:38:03 2007
> >> Subject: Re: [Seaside] Safari on Leopard Apache post problem
> >>
> >> Boris,
> >>         On the Leopard machine I start with stock Apache config
> >> file that
> >> ships with Leopard (see below) and add in a separate conf file
> >> that is
> >> included in the httpd.conf file:
> >> ---
> >> ScriptAlias /scandia/2008/ "/Library/WebServer/CGI-Executables/
> >> scandia.pl/"
> >>
> >> <Directory /Library/WebServer/CGI-Executables/>
> >>          Options +FollowSymLinks
> >>          RewriteEngine on
> >>          RewriteCond %{HTTP:Authorization} ^(.*)
> >>          RewriteRule .* - [E=HTTP_AUTHORIZATION:%1]
> >> </Directory>
> >> ---
> >>
> >> (Aside: the rewrite rules above do not work to pass the http
> >> authorization requests). The scandia.pl file is the perl relay file
> >> $visualHome/waveserver/waverelays/perl/visualworks.pl.  The

> >> WebServer/CGI-Executables is Apple's CGI-bin directory.
> >>
> >> The httpd.conf file with some comments removed:
> >> ---
> >> ServerRoot "/usr"
> >>
> >> Listen 80
> >>
> >> LoadModule authn_file_module libexec/apache2/mod_authn_file.so
> >> LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
> >> LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
> >> LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
> >> LoadModule authn_default_module

> >> LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
> >> LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
> >> LoadModule cache_module libexec/apache2/mod_cache.so
> >> LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so
> >> LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so
> >> LoadModule dbd_module libexec/apache2/mod_dbd.so
> >> LoadModule dumpio_module libexec/apache2/mod_dumpio.so
> >> LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
> >> LoadModule include_module libexec/apache2/mod_include.so
> >> LoadModule filter_module libexec/apache2/mod_filter.so
> >> LoadModule deflate_module libexec/apache2/mod_deflate.so
> >> LoadModule log_config_module libexec/apache2/mod_log_config.so
> >> LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
> >> LoadModule logio_module libexec/apache2/mod_logio.so
> >> LoadModule env_module libexec/apache2/mod_env.so
> >> LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
> >> LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so
> >> LoadModule expires_module libexec/apache2/mod_expires.so
> >> LoadModule headers_module libexec/apache2/mod_headers.so
> >> LoadModule ident_module libexec/apache2/mod_ident.so
> >> LoadModule usertrack_module libexec/apache2/mod_usertrack.so
> >> #LoadModule unique_id_module libexec/apache2/mod_unique_id.so
> >> LoadModule setenvif_module libexec/apache2/mod_setenvif.so
> >> LoadModule version_module libexec/apache2/mod_version.so
> >> LoadModule proxy_module libexec/apache2/mod_proxy.so
> >> LoadModule proxy_connect_module

> >> LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
> >> LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
> >> LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
> >> LoadModule proxy_balancer_module libexec/apache2/
> >> mod_proxy_balancer.so
> >> LoadModule ssl_module libexec/apache2/mod_ssl.so
> >> LoadModule mime_module libexec/apache2/mod_mime.so
> >> LoadModule dav_module libexec/apache2/mod_dav.so
> >> LoadModule status_module libexec/apache2/mod_status.so
> >> LoadModule autoindex_module libexec/apache2/mod_autoindex.so
> >> LoadModule asis_module libexec/apache2/mod_asis.so
> >> LoadModule info_module libexec/apache2/mod_info.so
> >> LoadModule cgi_module libexec/apache2/mod_cgi.so
> >> LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
> >> LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
> >> LoadModule negotiation_module libexec/apache2/mod_negotiation.so
> >> LoadModule dir_module libexec/apache2/mod_dir.so
> >> LoadModule imagemap_module libexec/apache2/mod_imagemap.so
> >> LoadModule actions_module libexec/apache2/mod_actions.so
> >> LoadModule speling_module libexec/apache2/mod_speling.so
> >> LoadModule userdir_module libexec/apache2/mod_userdir.so
> >> LoadModule alias_module libexec/apache2/mod_alias.so
> >> LoadModule rewrite_module libexec/apache2/mod_rewrite.so
> >> LoadModule bonjour_module     libexec/apache2/mod_bonjour.so
> >> #LoadModule php5_module        libexec/apache2/libphp5.so
> >> #LoadModule fastcgi_module     libexec/apache2/mod_fastcgi.so
> >>
> >> <IfModule !mpm_netware_module>
> >>
> >> User www
> >> Group www
> >> </IfModule>
> >>
> >>
> >> ServerAdmin [hidden email]
> >>
> >>
> >> DocumentRoot "/Library/WebServer/Documents"
> >>
> >> <Directory />
> >>      Options FollowSymLinks
> >>      AllowOverride None
> >>      Order deny,allow
> >>      Deny from all
> >> </Directory>
> >>
> >> <Directory "/Library/WebServer/Documents">
> >>      Options Indexes FollowSymLinks MultiViews
> >>      AllowOverride None
> >>      Order allow,deny
> >>      Allow from all
> >>
> >> </Directory>
> >>
> >> <IfModule dir_module>
> >>      DirectoryIndex index.html
> >> </IfModule>
> >>
> >>
> >> <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
> >>      Order allow,deny
> >>      Deny from all
> >>      Satisfy All
> >> </FilesMatch>
> >>
> >>
> >> <Files "rsrc">
> >>      Order allow,deny
> >>      Deny from all
> >>      Satisfy All
> >> </Files>
> >> <DirectoryMatch ".*\.\.namedfork">
> >>      Order allow,deny
> >>      Deny from all
> >>      Satisfy All
> >> </DirectoryMatch>
> >>
> >>
> >> ErrorLog /private/var/log/apache2/error_log
> >>
> >> LogLevel warn
> >>
> >> <IfModule log_config_module>
> >>
> >>      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> >> Agent}i\"" combined
> >>      LogFormat "%h %l %u %t \"%r\" %>s %b" common
> >>
> >>      <IfModule logio_module>
> >>        # You need to enable mod_logio.c to use %I and %O
> >>        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"

> >>      #
> >>      #CustomLog /private/var/log/apache2/access_log combined
> >> </IfModule>
> >>
> >> <IfModule alias_module>
> >>
> >>      #
> >>      # ScriptAlias: This controls which directories contain server
> >> scripts.
> >>      # ScriptAliases are essentially the same as Aliases, except

> >> to the
> >>      # client.  The same rules about trailing "/" apply to
> >> ScriptAlias
> >>      # directives as to Alias.
> >>      #
> >>      ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/
> >> WebServer/CGI-Executables/$1"
> >>
> >> </IfModule>
> >>
> >> <IfModule cgid_module>
> >>
> >> </IfModule>
> >>
> >> #
> >> # "/Library/WebServer/CGI-Executables" should be changed to

> >> your ScriptAliased
> >> # CGI directory exists, if you have that configured.
> >> #
> >> <Directory "/Library/WebServer/CGI-Executables">
> >>      AllowOverride None
> >>      Options None
> >>      Order allow,deny
> >>      Allow from all
> >> </Directory>
> >>
> >> DefaultType text/plain
> >>
> >> <IfModule mime_module>
> >>
> >>      TypesConfig /private/etc/apache2/mime.types
> >>
> >>      AddType application/x-compress .Z
> >>      AddType application/x-gzip .gz .tgz
> >>
> >>      #
> >>      # AddHandler allows you to map certain file extensions to
> >> "handlers":
> >>      # actions unrelated to filetype. These can be either built

> >> the server
> >>      # or added with the Action directive (see below)
> >>      #
> >>      # To use CGI scripts outside of ScriptAliased directories:
> >>      # (You will also need to add "ExecCGI" to the "Options"
> >> directive.)
> >>      #
> >>      #AddHandler cgi-script .cgi
> >>
> >>      # For type maps (negotiated resources):
> >>      #AddHandler type-map var
> >>
> >>      #
> >>      # Filters allow you to process content before it is sent to

> >> client.
> >>      #
> >>      # To parse .shtml files for server-side includes (SSI):
> >>      # (You will also need to add "Includes" to the "Options"
> >> directive.)
> >>      #
> >>      #AddType text/html .shtml
> >>      #AddOutputFilter INCLUDES .shtml
> >> </IfModule>
> >>
> >> #
> >> # The mod_mime_magic module allows the server to use various hints
> >> from the
> >> # contents of the file itself to determine its type.  The
> >> MIMEMagicFile
> >> # directive tells the module where the hint definitions are

> >> #
> >> #MIMEMagicFile /private/etc/apache2/magic
> >>
> >> #
> >> # Customizable error responses come in three flavors:
> >> # 1) plain text 2) local redirects 3) external redirects
> >> #
> >> # Some examples:
> >> #ErrorDocument 500 "The server made a boo boo."
> >> #ErrorDocument 404 /missing.html
> >> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> >> #ErrorDocument 402 http://www.example.com/subscription_info.html
> >> #
> >>
> >> #
> >> # EnableMMAP and EnableSendfile: On systems that support it,
> >> # memory-mapping or the sendfile syscall is used to deliver
> >> # files.  This usually improves server performance, but must
> >> # be turned off when serving from networked-mounted
> >> # filesystems or if support for these functions is otherwise
> >> # broken on your system.
> >> #
> >> #EnableMMAP off
> >> #EnableSendfile off
> >>
> >> # Supplemental configuration
> >> #
> >> # The configuration files in the /private/etc/apache2/extra/
> >> directory
> >> can be
> >> # included to add extra features or to modify the default
> >> configuration of
> >> # the server, or you may simply copy their contents here and
> >> change as
> >> # necessary.
> >>
> >> # Server-pool management (MPM specific)
> >> Include /private/etc/apache2/extra/httpd-mpm.conf
> >>
> >> # Multi-language error messages
> >> #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf
> >>
> >> # Fancy directory listings
> >> Include /private/etc/apache2/extra/httpd-autoindex.conf
> >>
> >> # Language settings
> >> Include /private/etc/apache2/extra/httpd-languages.conf
> >>
> >> # User home directories
> >> Include /private/etc/apache2/extra/httpd-userdir.conf
> >>
> >> # Real-time info on requests and configuration
> >> #Include /private/etc/apache2/extra/httpd-info.conf
> >>
> >> # Virtual hosts
> >> #Include /private/etc/apache2/extra/httpd-vhosts.conf
> >>
> >> # Local access to the Apache HTTP Server Manual
> >> Include /private/etc/apache2/extra/httpd-manual.conf
> >>
> >> # Distributed authoring and versioning (WebDAV)
> >> #Include /private/etc/apache2/extra/httpd-dav.conf
> >>
> >> # Various default settings
> >> #Include /private/etc/apache2/extra/httpd-default.conf
> >>
> >> # Secure (SSL/TLS) connections
> >> #Include /private/etc/apache2/extra/httpd-ssl.conf
> >> #
> >> # Note: The following must must be present to support
> >> #       starting without SSL on platforms with no /dev/random
> >> equivalent
> >> #       but a statically compiled-in mod_ssl.
> >> #
> >> <IfModule ssl_module>
> >> SSLRandomSeed startup builtin
> >> SSLRandomSeed connect builtin
> >> </IfModule>
> >>
> >> Include /private/etc/apache2/other/*.conf
> >> On Nov 13, 2007, at 6:22 PM, Boris Popov wrote:
> >>
> >> > That's pretty much the same configuration I'm using and we

> >> >> [hidden email]] On Behalf Of Roger Whitney
> >> >> Sent: Tuesday, November 13, 2007 4:20 PM
> >> >> To: Seaside - general discussion
> >> >> Subject: [Seaside] Safari on Leopard Apache post problem
> >> >>
> >> >> I have a problem with the new Safari on Leopard (Mac OS 10.5)
> >> >> accessing a Seaside application running behind Apache and hope
> >> >> someone
> >> >> can shed some light on it.
> >> >>
> >> >> I am using Seaside 2.8 on VW 7.5. When I run Seaside as a
> >> standalone
> >> >> web server in VW (the tiny Web server in VW) Safari in Leopard
> >> has no
> >> >> problems accessing the Seaside application. When I run the

> >> >> Apache.
> >> >>
> >> >>
> >> >>
> >> >> ----
> >> >> Roger Whitney              Department of Computer Science
> >> >> [hidden email]        San Diego State University
> >> >> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> seaside mailing list
> >> >> [hidden email]
> >> >>

> >> >
> >> >
> >>
> >>
> >>
> >> ----
> >> Roger Whitney              Department of Computer Science
> >> [hidden email]        San Diego State University
> >> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
> >>
> >>
> >> _______________________________________________
> >> seaside mailing list
> >> [hidden email]
> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >> _______________________________________________
> >> seaside mailing list
> >> [hidden email]
> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >
> >
> >
> > ----
> > Roger Whitney              Department of Computer Science
> > [hidden email]        San Diego State University
> > http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
> >
> >
> > _______________________________________________
> > seaside mailing list
> > [hidden email]
> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >
>
>
>
> ----
> Roger Whitney              Department of Computer Science
> [hidden email]        San Diego State University
> http://www.eli.sdsu.edu/   San Diego, CA 92182-7720
>
>
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside