So your working on a cool project and Pharo crashes

> actually, to tell  the truth I figured out how to get most of my  
> methods back. But not the right versions. I wonder if I can back out  
> the changes and try to select the ones that I do need, but there are  
> soo many.
>
> It does throw an error when I select multiple changesets. When I use  
> the "remove do it" that helps the most.
>
> its just such a mess right now
>
> On Wed, Feb 17, 2010 at 11:23 PM, Alexandre Bergel <[hidden email]
> > wrote:
> Hi Nathan,
>
> > Is there any way to do a recovery besides the Recover Lost Changes
> > option that doesn't seem to work?
>
> What do you mean by "doesn't seem to work"? I have always been happy
> with it.
> Does it raise an error?
>
> > It seems the change log that was left behind has some promising
> > things in it.
>
>
> You can directly inspect the .changes file next to your image.
>
> Cheers,
> Alexandre
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel  http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
>
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

> One thing. It looks like there is a changes file that has more up to  
> date information. How do I pull this in?
>
> On Wed, Feb 17, 2010 at 11:44 PM, Alexandre Bergel <[hidden email]
> > wrote:
> I also had the very same feeling the first times I used the "recover
> lost changes" option.  Now that I gained experience, I live
> comfortably with it.
>
> Cheers,
> Alexandre
>
> On 18 Feb 2010, at 02:37, Nathan Tuttle wrote:
>
> > actually, to tell  the truth I figured out how to get most of my
> > methods back. But not the right versions. I wonder if I can back out
> > the changes and try to select the ones that I do need, but there are
> > soo many.
> >
> > It does throw an error when I select multiple changesets. When I use
> > the "remove do it" that helps the most.
> >
> > its just such a mess right now
> >
> > On Wed, Feb 17, 2010 at 11:23 PM, Alexandre Bergel <[hidden email]
> > > wrote:
> > Hi Nathan,
> >
> > > Is there any way to do a recovery besides the Recover Lost Changes
> > > option that doesn't seem to work?
> >
> > What do you mean by "doesn't seem to work"? I have always been happy
> > with it.
> > Does it raise an error?
> >
> > > It seems the change log that was left behind has some promising
> > > things in it.
> >
> >
> > You can directly inspect the .changes file next to your image.
> >
> > Cheers,
> > Alexandre
> > --
> > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> > Alexandre Bergel  http://www.bergel.eu
> > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Pharo-project mailing list
> > [hidden email]
> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
> >
> > _______________________________________________
> > Pharo-project mailing list
> > [hidden email]
> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel  http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
>
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

> The change file needs to have the same name than the image to have it  
> listed when you do a recover lost changes.
> Else, you can simply edit the .changes using any (robust) text editor.  
> Cut and paste what you feel relevant into a new file that you name  
> yourchanges.cs
> You then have created a changeset file, which can be easily loaded  
> with a drag and drop from your OS desktop to the Pharo image.  
> Alternatively, you can use the file loader.
>
> Hope it helps.
>
> Cheers,
> Alexandre
>
> On 18 Feb 2010, at 03:13, Nathan Tuttle wrote:
>
>> One thing. It looks like there is a changes file that has more up to  
>> date information. How do I pull this in?
>>
>> On Wed, Feb 17, 2010 at 11:44 PM, Alexandre Bergel <[hidden email]
>>> wrote:
>> I also had the very same feeling the first times I used the "recover
>> lost changes" option.  Now that I gained experience, I live
>> comfortably with it.
>>
>> Cheers,
>> Alexandre
>>
>> On 18 Feb 2010, at 02:37, Nathan Tuttle wrote:
>>
>>> actually, to tell  the truth I figured out how to get most of my
>>> methods back. But not the right versions. I wonder if I can back out
>>> the changes and try to select the ones that I do need, but there are
>>> soo many.
>>>
>>> It does throw an error when I select multiple changesets. When I use
>>> the "remove do it" that helps the most.
>>>
>>> its just such a mess right now
>>>
>>> On Wed, Feb 17, 2010 at 11:23 PM, Alexandre Bergel <[hidden email]
>>>> wrote:
>>> Hi Nathan,
>>>
>>>> Is there any way to do a recovery besides the Recover Lost Changes
>>>> option that doesn't seem to work?
>>>
>>> What do you mean by "doesn't seem to work"? I have always been happy
>>> with it.
>>> Does it raise an error?
>>>
>>>> It seems the change log that was left behind has some promising
>>>> things in it.
>>>
>>>
>>> You can directly inspect the .changes file next to your image.
>>>
>>> Cheers,
>>> Alexandre
>>> --
>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>> Alexandre Bergel  http://www.bergel.eu
>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Pharo-project mailing list
>>> [hidden email]
>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>
>>> _______________________________________________
>>> Pharo-project mailing list
>>> [hidden email]
>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>
>> --
>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>> Alexandre Bergel  http://www.bergel.eu
>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Pharo-project mailing list
>> [hidden email]
>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>
>> _______________________________________________
>> Pharo-project mailing list
>> [hidden email]
>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel  http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
>
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

>I imagine that you can also recoever from another image.
> At least in VW we could do that.
> Nathan the first thing to do is to copy your image/changes because each
> time to receover you add
> new info to you changes.
>
> So if you screw it up now. Go back to before the first time you crashed
> because all your changes are
> still there. This is juts a matter of identifying them. Pay attention that
> we do not have classDefinition
> as in Cuis and VW so doit for class definition should be replayed too.
>
> finally did you save your code with monticello?
> Because this is the best way, publish often.
>
> Stef
>
>
>
> On Feb 18, 2010, at 7:25 AM, Alexandre Bergel wrote:
>
>> The change file needs to have the same name than the image to have it
>> listed when you do a recover lost changes.
>> Else, you can simply edit the .changes using any (robust) text editor.
>> Cut and paste what you feel relevant into a new file that you name
>> yourchanges.cs
>> You then have created a changeset file, which can be easily loaded
>> with a drag and drop from your OS desktop to the Pharo image.
>> Alternatively, you can use the file loader.
>>
>> Hope it helps.
>>
>> Cheers,
>> Alexandre
>>
>> On 18 Feb 2010, at 03:13, Nathan Tuttle wrote:
>>
>>> One thing. It looks like there is a changes file that has more up to
>>> date information. How do I pull this in?
>>>
>>> On Wed, Feb 17, 2010 at 11:44 PM, Alexandre Bergel <[hidden email]
>>>> wrote:
>>> I also had the very same feeling the first times I used the "recover
>>> lost changes" option.  Now that I gained experience, I live
>>> comfortably with it.
>>>
>>> Cheers,
>>> Alexandre
>>>
>>> On 18 Feb 2010, at 02:37, Nathan Tuttle wrote:
>>>
>>>> actually, to tell  the truth I figured out how to get most of my
>>>> methods back. But not the right versions. I wonder if I can back out
>>>> the changes and try to select the ones that I do need, but there are
>>>> soo many.
>>>>
>>>> It does throw an error when I select multiple changesets. When I use
>>>> the "remove do it" that helps the most.
>>>>
>>>> its just such a mess right now
>>>>
>>>> On Wed, Feb 17, 2010 at 11:23 PM, Alexandre Bergel <[hidden email]
>>>>> wrote:
>>>> Hi Nathan,
>>>>
>>>>> Is there any way to do a recovery besides the Recover Lost Changes
>>>>> option that doesn't seem to work?
>>>>
>>>> What do you mean by "doesn't seem to work"? I have always been happy
>>>> with it.
>>>> Does it raise an error?
>>>>
>>>>> It seems the change log that was left behind has some promising
>>>>> things in it.
>>>>
>>>>
>>>> You can directly inspect the .changes file next to your image.
>>>>
>>>> Cheers,
>>>> Alexandre
>>>> --
>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>> Alexandre Bergel  http://www.bergel.eu
>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Pharo-project mailing list
>>>> [hidden email]
>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>
>>>> _______________________________________________
>>>> Pharo-project mailing list
>>>> [hidden email]
>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>
>>> --
>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>> Alexandre Bergel  http://www.bergel.eu
>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Pharo-project mailing list
>>> [hidden email]
>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>
>>> _______________________________________________
>>> Pharo-project mailing list
>>> [hidden email]
>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>
>> --
>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>> Alexandre Bergel  http://www.bergel.eu
>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Pharo-project mailing list
>> [hidden email]
>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project 

> We have a few simple enhancements for ChangeList/ChangeRecord that
> identifies class defs, method removals etc.
> That way one can "remove doits" while keeping class definitions etc.
>
> I can post a changeset if anyone is interested.
>
> Regards, Gary
>
> ----- Original Message -----
> From: "Stéphane Ducasse" <[hidden email]>
> To: <[hidden email]>
> Sent: Thursday, February 18, 2010 10:58 AM
> Subject: Re: [Pharo-project] So your working on a cool project and
> Pharocrashes
>
>
>> I imagine that you can also recoever from another image.
>> At least in VW we could do that.
>> Nathan the first thing to do is to copy your image/changes because each
>> time to receover you add
>> new info to you changes.
>>
>> So if you screw it up now. Go back to before the first time you crashed
>> because all your changes are
>> still there. This is juts a matter of identifying them. Pay attention that
>> we do not have classDefinition
>> as in Cuis and VW so doit for class definition should be replayed too.
>>
>> finally did you save your code with monticello?
>> Because this is the best way, publish often.
>>
>> Stef
>>
>>
>>
>> On Feb 18, 2010, at 7:25 AM, Alexandre Bergel wrote:
>>
>>> The change file needs to have the same name than the image to have it
>>> listed when you do a recover lost changes.
>>> Else, you can simply edit the .changes using any (robust) text editor.
>>> Cut and paste what you feel relevant into a new file that you name
>>> yourchanges.cs
>>> You then have created a changeset file, which can be easily loaded
>>> with a drag and drop from your OS desktop to the Pharo image.
>>> Alternatively, you can use the file loader.
>>>
>>> Hope it helps.
>>>
>>> Cheers,
>>> Alexandre
>>>
>>> On 18 Feb 2010, at 03:13, Nathan Tuttle wrote:
>>>
>>>> One thing. It looks like there is a changes file that has more up to
>>>> date information. How do I pull this in?
>>>>
>>>> On Wed, Feb 17, 2010 at 11:44 PM, Alexandre Bergel <[hidden email]
>>>>> wrote:
>>>> I also had the very same feeling the first times I used the "recover
>>>> lost changes" option.  Now that I gained experience, I live
>>>> comfortably with it.
>>>>
>>>> Cheers,
>>>> Alexandre
>>>>
>>>> On 18 Feb 2010, at 02:37, Nathan Tuttle wrote:
>>>>
>>>>> actually, to tell  the truth I figured out how to get most of my
>>>>> methods back. But not the right versions. I wonder if I can back out
>>>>> the changes and try to select the ones that I do need, but there are
>>>>> soo many.
>>>>>
>>>>> It does throw an error when I select multiple changesets. When I use
>>>>> the "remove do it" that helps the most.
>>>>>
>>>>> its just such a mess right now
>>>>>
>>>>> On Wed, Feb 17, 2010 at 11:23 PM, Alexandre Bergel <[hidden email]
>>>>>> wrote:
>>>>> Hi Nathan,
>>>>>
>>>>>> Is there any way to do a recovery besides the Recover Lost Changes
>>>>>> option that doesn't seem to work?
>>>>>
>>>>> What do you mean by "doesn't seem to work"? I have always been happy
>>>>> with it.
>>>>> Does it raise an error?
>>>>>
>>>>>> It seems the change log that was left behind has some promising
>>>>>> things in it.
>>>>>
>>>>>
>>>>> You can directly inspect the .changes file next to your image.
>>>>>
>>>>> Cheers,
>>>>> Alexandre
>>>>> --
>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Pharo-project mailing list
>>>>> [hidden email]
>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>>
>>>>> _______________________________________________
>>>>> Pharo-project mailing list
>>>>> [hidden email]
>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>
>>>> --
>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>> Alexandre Bergel  http://www.bergel.eu
>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Pharo-project mailing list
>>>> [hidden email]
>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>
>>>> _______________________________________________
>>>> Pharo-project mailing list
>>>> [hidden email]
>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>
>>> --
>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>> Alexandre Bergel  http://www.bergel.eu
>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Pharo-project mailing list
>>> [hidden email]
>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>
>>
>> _______________________________________________
>> Pharo-project mailing list
>> [hidden email]
>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project 
>
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

> We have a few simple enhancements for ChangeList/ChangeRecord that
> identifies class defs, method removals etc.
> That way one can "remove doits" while keeping class definitions etc.
>
> I can post a changeset if anyone is interested.
>
> Regards, Gary
>
> ----- Original Message -----
> From: "Stéphane Ducasse" <[hidden email]>
> To: <[hidden email]>
> Sent: Thursday, February 18, 2010 10:58 AM
> Subject: Re: [Pharo-project] So your working on a cool project and
> Pharocrashes
>
>
>> I imagine that you can also recoever from another image.
>> At least in VW we could do that.
>> Nathan the first thing to do is to copy your image/changes because each
>> time to receover you add
>> new info to you changes.
>>
>> So if you screw it up now. Go back to before the first time you crashed
>> because all your changes are
>> still there. This is juts a matter of identifying them. Pay attention that
>> we do not have classDefinition
>> as in Cuis and VW so doit for class definition should be replayed too.
>>
>> finally did you save your code with monticello?
>> Because this is the best way, publish often.
>>
>> Stef
>>
>>
>>
>> On Feb 18, 2010, at 7:25 AM, Alexandre Bergel wrote:
>>
>>> The change file needs to have the same name than the image to have it
>>> listed when you do a recover lost changes.
>>> Else, you can simply edit the .changes using any (robust) text editor.
>>> Cut and paste what you feel relevant into a new file that you name
>>> yourchanges.cs
>>> You then have created a changeset file, which can be easily loaded
>>> with a drag and drop from your OS desktop to the Pharo image.
>>> Alternatively, you can use the file loader.
>>>
>>> Hope it helps.
>>>
>>> Cheers,
>>> Alexandre
>>>
>>> On 18 Feb 2010, at 03:13, Nathan Tuttle wrote:
>>>
>>>> One thing. It looks like there is a changes file that has more up to
>>>> date information. How do I pull this in?
>>>>
>>>> On Wed, Feb 17, 2010 at 11:44 PM, Alexandre Bergel <[hidden email]
>>>>> wrote:
>>>> I also had the very same feeling the first times I used the "recover
>>>> lost changes" option.  Now that I gained experience, I live
>>>> comfortably with it.
>>>>
>>>> Cheers,
>>>> Alexandre
>>>>
>>>> On 18 Feb 2010, at 02:37, Nathan Tuttle wrote:
>>>>
>>>>> actually, to tell  the truth I figured out how to get most of my
>>>>> methods back. But not the right versions. I wonder if I can back out
>>>>> the changes and try to select the ones that I do need, but there are
>>>>> soo many.
>>>>>
>>>>> It does throw an error when I select multiple changesets. When I use
>>>>> the "remove do it" that helps the most.
>>>>>
>>>>> its just such a mess right now
>>>>>
>>>>> On Wed, Feb 17, 2010 at 11:23 PM, Alexandre Bergel <[hidden email]
>>>>>> wrote:
>>>>> Hi Nathan,
>>>>>
>>>>>> Is there any way to do a recovery besides the Recover Lost Changes
>>>>>> option that doesn't seem to work?
>>>>>
>>>>> What do you mean by "doesn't seem to work"? I have always been happy
>>>>> with it.
>>>>> Does it raise an error?
>>>>>
>>>>>> It seems the change log that was left behind has some promising
>>>>>> things in it.
>>>>>
>>>>>
>>>>> You can directly inspect the .changes file next to your image.
>>>>>
>>>>> Cheers,
>>>>> Alexandre
>>>>> --
>>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>>> Alexandre Bergel  http://www.bergel.eu
>>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Pharo-project mailing list
>>>>> [hidden email]
>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>>
>>>>> _______________________________________________
>>>>> Pharo-project mailing list
>>>>> [hidden email]
>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>
>>>> --
>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>>> Alexandre Bergel  http://www.bergel.eu
>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Pharo-project mailing list
>>>> [hidden email]
>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>>
>>>> _______________________________________________
>>>> Pharo-project mailing list
>>>> [hidden email]
>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>>
>>> --
>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>>> Alexandre Bergel  http://www.bergel.eu
>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Pharo-project mailing list
>>> [hidden email]
>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>>
>>
>> _______________________________________________
>> Pharo-project mailing list
>> [hidden email]
>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project 
>
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

> On 2/17/2010 11:25 PM, Alexandre Bergel wrote:
>> The change file needs to have the same name than the image to have it
>> listed when you do a recover lost changes.
>
> Not really, you can drag and drop any changes file onto any image and
> it'll popup the same changes editor that recover lost changes does.  
> If
> you're after the latest changes just remove older versions, then  
> remove
> up to date versions, then remove any unnecessary do it's and what's  
> left
> will be the diffs, review and file them in.
>
>> Else, you can simply edit the .changes using any (robust) text  
>> editor.
>> Cut and paste what you feel relevant into a new file that you name
>> yourchanges.cs
>
> Unnecessary because of the above.
>
> --
> Ramon Leon
> http://onsmalltalk.com
>
> _______________________________________________
> Pharo-project mailing list
> [hidden email]
> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project