Telling Smalltalk to not do windowsey kinds of things - headless application tips?

When I start my runtime application I launch it without opening any windows, but it isn't getting that far.  Instead it is throwing errors while trying to open windows and such.  Why is that?  How can I tell my packaged application not to do any GUI stuff which apparently isn't working because not all that stuff is packaged anyways.

My application doesn't have a GUI.

What is the simplest way to do a headless image?  I find the documentation hard to follow.

Thanks,

-Carl

Two examples follow:

Walkback at 9:03:15 AM on 7/2/2015

AbtShellView does not understand createMigrationItemNamed:inMenu:

[] in EpRuntimeStartUp class(EsWindowSystemStartUp class)>>#outputWalkback:process:

  receiver = EpRuntimeStartUp

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

  arg2 = UIProcess:(7/2/2015 9:03:14 AM){running,3}

  temp1 = 'C:\VA Smalltalk\8.6\walkback.log'

  temp2 = -1

  temp3 = a CfsWriteFileStream

EsCompactBlockContextTemplate(Block)>>#valueWithErrorHandler:oldHandler:onReturnDo:

  receiver = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg1 = [] in Block>>#when:do:exitWith:retryReturn:

  arg2 = nil

  arg3 = []

EsCompactBlockContextTemplate(Block)>>#when:do:exitWith:retryReturn:

  receiver = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg1 = an ExceptionalEventCollection

  arg2 = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg3 = [] in Block>>#when:do:

  arg4 = an Object

  temp1 = [] in Block>>#when:do:exitWith:retryReturn:

  temp2 = [] in Block>>#when:do:exitWith:retryReturn:

  temp3 = nil

EsCompactBlockContextTemplate(Block)>>#when:do:

  receiver = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg1 = an ExceptionalEventCollection

  arg2 = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  temp1 = an Object

  temp2 = nil

EpRuntimeStartUp class(EsWindowSystemStartUp class)>>#outputWalkback:process:

  receiver = EpRuntimeStartUp

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

  arg2 = UIProcess:(7/2/2015 9:03:14 AM){running,3}

  temp1 = 'C:\VA Smalltalk\8.6\walkback.log'

  temp2 = -1

  temp3 = a CfsWriteFileStream

EpRuntimeStartUp class(EsImageStartUp class)>>#outputWalkback:

  receiver = EpRuntimeStartUp

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

EpRuntimeStartUp class>>#reportError:resumable:startBP:

  receiver = EpRuntimeStartUp

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

  arg2 = false

  arg3 = 452

UIProcess(Process)>>#reportError:resumable:

  receiver = UIProcess:(7/2/2015 9:03:14 AM){running,3}

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

  arg2 = false

  temp1 = 452

[optimized] in ExceptionalEvent class>>#initializeSystemExceptions

  blockarg1 = Signal on Exception: (ExError) An error has occurred.

Signal>>#evaluate:

  receiver = Signal on Exception: (ExError) An error has occurred.

  arg1 = [] in ExceptionalEvent class>>#initializeSystemExceptions

Signal>>#evaluateDefaultHandler:

  receiver = Signal on Exception: (ExError) An error has occurred.

  arg1 = [] in ExceptionalEvent class>>#initializeSystemExceptions

ExceptionalEvent>>#applyDefaultHandler:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = Signal on Exception: (ExError) An error has occurred.

  temp1 = Exception: (ExError) An error has occurred.

ExceptionalEvent>>#signalFor:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = Signal on Exception: (ExError) An error has occurred.

  temp1 = nil

ExceptionalEvent>>#signalWithArguments:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = ('AbtShellView does not understand createMigrationItemNamed:inMenu:')

ExceptionalEvent>>#signalWith:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

AbtShellView(Object)>>#error:

  receiver = an AbtShellView('Window')

  arg1 = 'AbtShellView does not understand createMigrationItemNamed:inMenu:'

MessageNotUnderstood>>#defaultAction

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

[optimized] in Exception class>>#newExceptionalEvent

  blockarg1 = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

MessageNotUnderstood(Exception)>>#evaluateDefaultHandler:

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = [] in Exception class>>#newExceptionalEvent

ExceptionalEvent>>#applyDefaultHandler:

  receiver = Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  temp1 = Exception: (ExMessageNotUnderstood) An exception has occurred

ExceptionalEvent>>#signalFor:

  receiver = Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  temp1 = nil

MessageNotUnderstood(Exception)>>#signal

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

MessageNotUnderstood(Exception)>>#signal:

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = 'an AbtShellView(''Window'') does not understand Message (#createMigrationItemNamed:inMenu:, (''Base Migration'' an AbtCwMenuView(''ApplicationsMigratePulldown'')))'

MessageNotUnderstood class>>#signalWith:

  receiver = MessageNotUnderstood

  arg1 = (an AbtShellView('Window') Message (#createMigrationItemNamed:inMenu:, ('Base Migration' an AbtCwMenuView('ApplicationsMigratePulldown'))))

AbtShellView(Object)>>#doesNotUnderstand:

  receiver = an AbtShellView('Window')

  arg1 = Message (#createMigrationItemNamed:inMenu:, ('Base Migration' an AbtCwMenuView('ApplicationsMigratePulldown')))

Message>>#sendTo:

  receiver = Message (#createMigrationItemNamed:inMenu:, ('Base Migration' an AbtCwMenuView('ApplicationsMigratePulldown')))

  arg1 = an AbtShellView('Window')

AbtApplicationsOrganizerView(AbtAppBldrPart)>>#doesNotUnderstand:

  receiver = an AbtApplicationsOrganizerView

  arg1 = Message (#createMigrationItemNamed:inMenu:, ('Base Migration' an AbtCwMenuView('ApplicationsMigratePulldown')))

[] in AbtApplicationsOrganizerView>>#createApplicationsMigrateMenu:

  receiver = an AbtApplicationsOrganizerView

  arg1 = ##pulldown

  temp1 = an AbtCwMenuView('ApplicationsMigratePulldown')

  temp2 = AbtOrderedDictionary((#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:) )

  temp3 = (#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:)

  blockarg1 = 'Base Migration' -> (#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:)

[] in AbtOrderedDictionary(EsOrderedDictionary)>>#associationsDo:

  receiver = AbtOrderedDictionary((#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:) )

  arg1 = [] in AbtApplicationsOrganizerView>>#createApplicationsMigrateMenu:

  blockarg1 = 'Base Migration'

  blockarg2 = 1

OrderedCollection>>#doWithIndex:

  receiver = OrderedCollection('Base Migration' )

  arg1 = [] in EsOrderedDictionary>>#associationsDo:

AbtOrderedDictionary(EsOrderedDictionary)>>#associationsDo:

  receiver = AbtOrderedDictionary((#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:) )

  arg1 = [] in AbtApplicationsOrganizerView>>#createApplicationsMigrateMenu:

AbtApplicationsOrganizerView>>#createApplicationsMigrateMenu:

  receiver = an AbtApplicationsOrganizerView

  arg1 = ##pulldown

  temp1 = an AbtCwMenuView('ApplicationsMigratePulldown')

  temp2 = AbtOrderedDictionary((#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:) )

  temp3 = (#createMigrationItemNamed:inMenu: #enableMigrationItemNamed:inMenu:)

AbtApplicationsOrganizerView>>#createApplicationsMenu:

  receiver = an AbtApplicationsOrganizerView

  arg1 = ##pulldown

  temp1 = an AbtCwMenuView('ApplicationsPulldown')

  temp2 = an AbtApplicationsOrganizer

AbtApplicationsOrganizerView>>#createMenuBar:

  receiver = an AbtApplicationsOrganizerView

  arg1 = ##pulldown

  temp1 = an AbtCwMenuView('MenuBar')

AbtApplicationsOrganizerView>>#createMenus

  receiver = an AbtApplicationsOrganizerView

  temp1 = nil

  temp2 = nil

  temp3 = nil

  temp4 = nil

  temp5 = nil

AbtApplicationsOrganizerView>>#initializeWindow

  receiver = an AbtApplicationsOrganizerView

  temp1 = an AbtContainerIconTreeView('ApplicationsContainer')

  temp2 = nil

DirectedMessage>>#abrSend

  receiver = DirectedMessage (an AbtApplicationsOrganizerView, #initializeWindow, ())

[optimized] in AbtDependentsCollection>>#signalEvent

  blockarg1 = DirectedMessage (an AbtApplicationsOrganizerView, #initializeWindow, ())

OrderedCollection>>#do:

  receiver = OrderedCollection(DirectedMessage (an AbtApplicationsOrganizerView, #initializeWindow, ()) )

  arg1 = [] in AbtDependentsCollection>>#signalEvent

AbtDependentsCollection>>#signalEvent

  receiver = an AbtDependentsCollection

AbtShellView(AbtPart)>>#callHandlers:

  receiver = an AbtShellView('Window')

  arg1 = an AbtDependentsCollection

AbtShellView(AbtBasicView)>>#signalAboutToOpenWidget

  receiver = an AbtShellView('Window')

AbtShellView>>#setPostCreationSettings

  receiver = an AbtShellView('Window')

AbtShellView>>#openWidget

  receiver = an AbtShellView('Window')

  temp1 = true

AbtApplicationsOrganizerView(AbtAppBldrView)>>#openWidget

  receiver = an AbtApplicationsOrganizerView

AbtApplicationsOrganizerView>>#openWidget

  receiver = an AbtApplicationsOrganizerView

[] in AbtApplicationsOrganizerView class>>#restart

  receiver = AbtApplicationsOrganizerView

  temp1 = nil

  temp2 = an AbtApplicationsOrganizerView

  blocktemp1 = nil

EmSystemConfiguration>>#showBusyCursorWhile:

  receiver = an EmSystemConfiguration

  arg1 = [] in AbtApplicationsOrganizerView class>>#restart

  temp1 = nil

  temp2 = nil

AbtApplicationsOrganizerView class>>#restart

  receiver = AbtApplicationsOrganizerView

  temp1 = nil

  temp2 = an AbtApplicationsOrganizerView

[optimized] in AbtOrganizerApp class>>#startUp

CwAppContext>>#processBackgroundGraphicRequests

  receiver = a CwAppContext

  temp1 = [] in AbtOrganizerApp class>>#startUp

  temp2 = 1

  temp3 = true

CwAppContext>>#readAndDispatch

  receiver = a CwAppContext

EpRuntimeStartUp class(EsWindowSystemStartUp class)>>#messageLoop

  receiver = EpRuntimeStartUp

  temp1 = nil

  temp2 = a CwAppContext

[optimized] in UIProcess class>>#forkUserInterface

[] in UIProcess(Process)>>#executeBlock:withArguments:

  receiver = UIProcess:(7/2/2015 9:03:14 AM){running,3}

  arg1 = [] in UIProcess class>>#forkUserInterface

  arg2 = ()

UIProcess(Process)>>#executeBlock:withArguments:

  receiver = UIProcess:(7/2/2015 9:03:14 AM){running,3}

  arg1 = [] in UIProcess class>>#forkUserInterface

  arg2 = ()

UIProcess(Process)>>#newProcessOn:stackSize:withArguments:named:

  receiver = UIProcess:(7/2/2015 9:03:14 AM){running,3}

  arg1 = [] in UIProcess class>>#forkUserInterface

  arg2 = 1024

  arg3 = ()

  arg4 = '(7/2/2015 9:03:14 AM)'

Walkback at 9:03:21 AM on 7/2/2015

UndefinedObject does not understand abtAsPartType

[] in EpRuntimeStartUp class(EsWindowSystemStartUp class)>>#outputWalkback:process:

  receiver = EpRuntimeStartUp

  arg1 = 'UndefinedObject does not understand abtAsPartType'

  arg2 = Process:15232{running,2}

  temp1 = 'C:\VA Smalltalk\8.6\walkback.log'

  temp2 = -1

  temp3 = a CfsWriteFileStream

EsCompactBlockContextTemplate(Block)>>#valueWithErrorHandler:oldHandler:onReturnDo:

  receiver = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg1 = [] in Block>>#when:do:exitWith:retryReturn:

  arg2 = nil

  arg3 = []

EsCompactBlockContextTemplate(Block)>>#when:do:exitWith:retryReturn:

  receiver = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg1 = an ExceptionalEventCollection

  arg2 = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg3 = [] in Block>>#when:do:

  arg4 = an Object

  temp1 = [] in Block>>#when:do:exitWith:retryReturn:

  temp2 = [] in Block>>#when:do:exitWith:retryReturn:

  temp3 = nil

EsCompactBlockContextTemplate(Block)>>#when:do:

  receiver = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  arg1 = an ExceptionalEventCollection

  arg2 = [] in EsWindowSystemStartUp class>>#outputWalkback:process:

  temp1 = an Object

  temp2 = nil

EpRuntimeStartUp class(EsWindowSystemStartUp class)>>#outputWalkback:process:

  receiver = EpRuntimeStartUp

  arg1 = 'UndefinedObject does not understand abtAsPartType'

  arg2 = Process:15232{running,2}

  temp1 = 'C:\VA Smalltalk\8.6\walkback.log'

  temp2 = -1

  temp3 = a CfsWriteFileStream

EpRuntimeStartUp class(EsImageStartUp class)>>#outputWalkback:

  receiver = EpRuntimeStartUp

  arg1 = 'UndefinedObject does not understand abtAsPartType'

EpRuntimeStartUp class>>#reportError:resumable:startBP:

  receiver = EpRuntimeStartUp

  arg1 = 'UndefinedObject does not understand abtAsPartType'

  arg2 = false

  arg3 = 238

Process>>#reportError:resumable:

  receiver = Process:15232{running,2}

  arg1 = 'UndefinedObject does not understand abtAsPartType'

  arg2 = false

  temp1 = 238

[optimized] in ExceptionalEvent class>>#initializeSystemExceptions

  blockarg1 = Signal on Exception: (ExError) An error has occurred.

Signal>>#evaluate:

  receiver = Signal on Exception: (ExError) An error has occurred.

  arg1 = [] in ExceptionalEvent class>>#initializeSystemExceptions

Signal>>#evaluateDefaultHandler:

  receiver = Signal on Exception: (ExError) An error has occurred.

  arg1 = [] in ExceptionalEvent class>>#initializeSystemExceptions

ExceptionalEvent>>#applyDefaultHandler:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = Signal on Exception: (ExError) An error has occurred.

  temp1 = Exception: (ExError) An error has occurred.

ExceptionalEvent>>#signalFor:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = Signal on Exception: (ExError) An error has occurred.

  temp1 = nil

ExceptionalEvent>>#signalWithArguments:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = ('UndefinedObject does not understand abtAsPartType')

ExceptionalEvent>>#signalWith:

  receiver = Exception: (ExError) An error has occurred.

  arg1 = 'UndefinedObject does not understand abtAsPartType'

UndefinedObject(Object)>>#error:

  receiver = nil

  arg1 = 'UndefinedObject does not understand abtAsPartType'

MessageNotUnderstood>>#defaultAction

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

[optimized] in Exception class>>#newExceptionalEvent

  blockarg1 = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

MessageNotUnderstood(Exception)>>#evaluateDefaultHandler:

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = [] in Exception class>>#newExceptionalEvent

ExceptionalEvent>>#applyDefaultHandler:

  receiver = Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  temp1 = Exception: (ExMessageNotUnderstood) An exception has occurred

ExceptionalEvent>>#signalFor:

  receiver = Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  temp1 = nil

MessageNotUnderstood(Exception)>>#signal

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

MessageNotUnderstood(Exception)>>#signal:

  receiver = Signal on Exception: (ExMessageNotUnderstood) An exception has occurred

  arg1 = 'nil does not understand Message (#abtAsPartType, ())'

MessageNotUnderstood class>>#signalWith:

  receiver = MessageNotUnderstood

  arg1 = (nil Message (#abtAsPartType, ()))

UndefinedObject(Object)>>#doesNotUnderstand:

  receiver = nil

  arg1 = Message (#abtAsPartType, ())

[optimized] in AbtPartsCatalog class>>#preloadPaletteGraphics

  blockarg1 = nil

OrderedCollection>>#do:

  receiver = OrderedCollection(#AbtShellView #AbtFormView #AbtGroupBoxView #AbtScrolledWindowView #AbtPortablePMNotebookView #AbtPortableWINNotebookView #AbtPortableNotebookPageView #WkNotebookView #WkSplitBar nil )

  arg1 = [] in AbtPartsCatalog class>>#preloadPaletteGraphics

[] in AbtPartsCatalog class>>#preloadPaletteGraphics

  receiver = AbtPartsCatalog

  temp1 = OrderedCollection(an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory )

  temp2 = an AbtIconDescriptor

  blockarg1 = an AbtPartsCategory

OrderedCollection>>#do:

  receiver = OrderedCollection(an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory )

  arg1 = [] in AbtPartsCatalog class>>#preloadPaletteGraphics

AbtPartsCatalog class>>#preloadPaletteGraphics

  receiver = AbtPartsCatalog

  temp1 = OrderedCollection(an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory an AbtPartsCategory )

  temp2 = an AbtIconDescriptor

[optimized] in AbtEditPartsCatalogSubApp class>>#startUp

[] in Process>>#executeBlock:withArguments:

  receiver = Process:15232{running,2}

  arg1 = [] in AbtEditPartsCatalogSubApp class>>#startUp

  arg2 = ()

Process>>#executeBlock:withArguments:

  receiver = Process:15232{running,2}

  arg1 = [] in AbtEditPartsCatalogSubApp class>>#startUp

  arg2 = ()

Process>>#newProcessOn:stackSize:withArguments:named:

  receiver = Process:15232{running,2}

  arg1 = [] in AbtEditPartsCatalogSubApp class>>#startUp

  arg2 = 1024

  arg3 = ()

  arg4 = '15232'

Hi Carl.
You can start reading this section from the online documentation:

<a href="http://www.instantiations.com/docs/861/wwhelp/wwhimpl/js/html/wwhelp.htm#href=sv/server16.html" target="_blank" rel="nofollow" onmousedown="this.href='http://www.google.com/url?q\75http%3A%2F%2Fwww.instantiations.com%2Fdocs%2F861%2Fwwhelp%2Fwwhimpl%2Fjs%2Fhtml%2Fwwhelp.htm%23href%3Dsv%2Fserver16.html\46sa\75D\46sntz\0751\46usg\75AFQjCNFhiApGBq8qkH6PFwgxrVdGQa-wyw';return true;" onclick="this.href='http://www.google.com/url?q\75http%3A%2F%2Fwww.instantiations.com%2Fdocs%2F861%2Fwwhelp%2Fwwhimpl%2Fjs%2Fhtml%2Fwwhelp.htm%23href%3Dsv%2Fserver16.html\46sa\75D\46sntz\0751\46usg\75AFQjCNFhiApGBq8qkH6PFwgxrVdGQa-wyw';return true;">http://www.instantiations.com/docs/861/wwhelp/wwhimpl/js/html/wwhelp.htm#href=sv/server16.html

As Joachim mentioned, you first must load the "ST: Server Workbench, Base" feature.

After that you will see a new option at Transcript Menu: XD
<a href="https://www.dropbox.com/s/0eqllzi2zi0eife/1.png?dl=0" target="_blank" rel="nofollow" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F0eqllzi2zi0eife%2F1.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNHjZafX-2wOh_MAQGLsLLG9OzSGOA';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F0eqllzi2zi0eife%2F1.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNHjZafX-2wOh_MAQGLsLLG9OzSGOA';return true;">https://www.dropbox.com/s/0eqllzi2zi0eife/1.png?dl=0

From that menu you will be able to create passive images.
<a href="https://www.dropbox.com/s/9j90hq28oissnik/2.png?dl=0" target="_blank" rel="nofollow" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F9j90hq28oissnik%2F2.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFqSFgXNlK7xCTnep82-0B-lJJfNA';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F9j90hq28oissnik%2F2.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFqSFgXNlK7xCTnep82-0B-lJJfNA';return true;">https://www.dropbox.com/s/9j90hq28oissnik/2.png?dl=0

You must select the image type (Windows / UNIX) and the features that you want to be loaded on the new image:
<a href="https://www.dropbox.com/s/jo7c84q9rla66t3/3.png?dl=0" target="_blank" rel="nofollow" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fjo7c84q9rla66t3%2F3.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNGamBp6Rq76BjqqmhRHkoP7Wfgecw';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fjo7c84q9rla66t3%2F3.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNGamBp6Rq76BjqqmhRHkoP7Wfgecw';return true;">https://www.dropbox.com/s/jo7c84q9rla66t3/3.png?dl=0

<a href="https://www.dropbox.com/s/j07hj865ylc4r5c/4.png?dl=0" target="_blank" rel="nofollow" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fj07hj865ylc4r5c%2F4.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFLlp3hrwHrdEPJAVRYoxJ2Wj6a5w';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fj07hj865ylc4r5c%2F4.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFLlp3hrwHrdEPJAVRYoxJ2Wj6a5w';return true;">https://www.dropbox.com/s/j07hj865ylc4r5c/4.png?dl=0

Then you can switch from Development and Passive image.
<a href="https://www.dropbox.com/s/wmkqnqr37k3hyct/5.png?dl=0" target="_blank" rel="nofollow" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fwmkqnqr37k3hyct%2F5.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNEa6TWtOYMli15sHVDe4Dh4v8BFhQ';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fwmkqnqr37k3hyct%2F5.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNEa6TWtOYMli15sHVDe4Dh4v8BFhQ';return true;">https://www.dropbox.com/s/wmkqnqr37k3hyct/5.png?dl=0

Packaging instructions should be loaded at Development Image.

AbtHeadlessRuntimeStartUp class will be available at Passive image. You must package your headless from the passive image.

Regards,

Santiago

On Thu, Jul 2, 2015 at 12:14 PM, Joachim Tuchel <<a href="javascript:" target="_blank" gdf-obfuscated-mailto="fyDwwepsOswJ" rel="nofollow" onmousedown="this.href='javascript:';return true;" onclick="this.href='javascript:';return true;">jtu...@...> wrote:

Carl,

If you wanz to build a headless Image, you have to look at Cross Packaging or XD Packaging. The process isn't hard, but it starts with loading the Server feature and you need to learn about active and passive images. I am not at my PC right now, so I cannot tell you which book in the docs to consult, but I hope I could give you a starting point. Are you coming to Brescia? If so, I would be happy to show you how we do it for Kobtolino.

Joachim

--
You received this message because you are subscribed to the Google Groups "VA Smalltalk" group.
To unsubscribe from this group and stop receiving emails from it, send an email to <a href="javascript:" target="_blank" gdf-obfuscated-mailto="fyDwwepsOswJ" rel="nofollow" onmousedown="this.href='javascript:';return true;" onclick="this.href='javascript:';return true;">va-smalltalk...@googlegroups.com.
To post to this group, send email to <a href="javascript:" target="_blank" gdf-obfuscated-mailto="fyDwwepsOswJ" rel="nofollow" onmousedown="this.href='javascript:';return true;" onclick="this.href='javascript:';return true;">va-sma...@....
Visit this group at <a href="http://groups.google.com/group/va-smalltalk" rel="nofollow" target="_blank" onmousedown="this.href='http://groups.google.com/group/va-smalltalk';return true;" onclick="this.href='http://groups.google.com/group/va-smalltalk';return true;">http://groups.google.com/group/va-smalltalk.
For more options, visit <a href="https://groups.google.com/d/optout" rel="nofollow" target="_blank" onmousedown="this.href='https://groups.google.com/d/optout';return true;" onclick="this.href='https://groups.google.com/d/optout';return true;">https://groups.google.com/d/optout.

Wow, thanks for your help guys.

I have to say, this aspect of VA Smalltalk is impressive and interesting.  It is also more complicated than any Smalltalk packaging scheme I've ever seen.  Too many options make it a bit bewildering but this may be solved by rethinking documentation.

Please work on making all this easier.  A series of videos showing how to use the packaging schemes and tools might help a lot.

Thanks again.

-Carl

On Thursday, July 2, 2015 at 12:36:12 PM UTC-4, Santiago Cardoso Geller wrote:

Hi Carl.
You can start reading this section from the online documentation:

<a href="http://www.instantiations.com/docs/861/wwhelp/wwhimpl/js/html/wwhelp.htm#href=sv/server16.html" rel="nofollow" target="_blank" onmousedown="this.href='http://www.google.com/url?q\75http%3A%2F%2Fwww.instantiations.com%2Fdocs%2F861%2Fwwhelp%2Fwwhimpl%2Fjs%2Fhtml%2Fwwhelp.htm%23href%3Dsv%2Fserver16.html\46sa\75D\46sntz\0751\46usg\75AFQjCNFhiApGBq8qkH6PFwgxrVdGQa-wyw';return true;" onclick="this.href='http://www.google.com/url?q\75http%3A%2F%2Fwww.instantiations.com%2Fdocs%2F861%2Fwwhelp%2Fwwhimpl%2Fjs%2Fhtml%2Fwwhelp.htm%23href%3Dsv%2Fserver16.html\46sa\75D\46sntz\0751\46usg\75AFQjCNFhiApGBq8qkH6PFwgxrVdGQa-wyw';return true;">http://www.instantiations.com/docs/861/wwhelp/wwhimpl/js/html/wwhelp.htm#href=sv/server16.html

As Joachim mentioned, you first must load the "ST: Server Workbench, Base" feature.

After that you will see a new option at Transcript Menu: XD
<a href="https://www.dropbox.com/s/0eqllzi2zi0eife/1.png?dl=0" rel="nofollow" target="_blank" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F0eqllzi2zi0eife%2F1.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNHjZafX-2wOh_MAQGLsLLG9OzSGOA';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F0eqllzi2zi0eife%2F1.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNHjZafX-2wOh_MAQGLsLLG9OzSGOA';return true;">https://www.dropbox.com/s/0eqllzi2zi0eife/1.png?dl=0

From that menu you will be able to create passive images.
<a href="https://www.dropbox.com/s/9j90hq28oissnik/2.png?dl=0" rel="nofollow" target="_blank" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F9j90hq28oissnik%2F2.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFqSFgXNlK7xCTnep82-0B-lJJfNA';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2F9j90hq28oissnik%2F2.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFqSFgXNlK7xCTnep82-0B-lJJfNA';return true;">https://www.dropbox.com/s/9j90hq28oissnik/2.png?dl=0

You must select the image type (Windows / UNIX) and the features that you want to be loaded on the new image:
<a href="https://www.dropbox.com/s/jo7c84q9rla66t3/3.png?dl=0" rel="nofollow" target="_blank" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fjo7c84q9rla66t3%2F3.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNGamBp6Rq76BjqqmhRHkoP7Wfgecw';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fjo7c84q9rla66t3%2F3.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNGamBp6Rq76BjqqmhRHkoP7Wfgecw';return true;">https://www.dropbox.com/s/jo7c84q9rla66t3/3.png?dl=0

<a href="https://www.dropbox.com/s/j07hj865ylc4r5c/4.png?dl=0" rel="nofollow" target="_blank" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fj07hj865ylc4r5c%2F4.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFLlp3hrwHrdEPJAVRYoxJ2Wj6a5w';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fj07hj865ylc4r5c%2F4.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNFLlp3hrwHrdEPJAVRYoxJ2Wj6a5w';return true;">https://www.dropbox.com/s/j07hj865ylc4r5c/4.png?dl=0

Then you can switch from Development and Passive image.
<a href="https://www.dropbox.com/s/wmkqnqr37k3hyct/5.png?dl=0" rel="nofollow" target="_blank" onmousedown="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fwmkqnqr37k3hyct%2F5.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNEa6TWtOYMli15sHVDe4Dh4v8BFhQ';return true;" onclick="this.href='https://www.google.com/url?q\75https%3A%2F%2Fwww.dropbox.com%2Fs%2Fwmkqnqr37k3hyct%2F5.png%3Fdl%3D0\46sa\75D\46sntz\0751\46usg\75AFQjCNEa6TWtOYMli15sHVDe4Dh4v8BFhQ';return true;">https://www.dropbox.com/s/wmkqnqr37k3hyct/5.png?dl=0

Packaging instructions should be loaded at Development Image.

AbtHeadlessRuntimeStartUp class will be available at Passive image. You must package your headless from the passive image.

Regards,

Santiago

On Thu, Jul 2, 2015 at 12:14 PM, Joachim Tuchel <[hidden email]> wrote:

Carl,

If you wanz to build a headless Image, you have to look at Cross Packaging or XD Packaging. The process isn't hard, but it starts with loading the Server feature and you need to learn about active and passive images. I am not at my PC right now, so I cannot tell you which book in the docs to consult, but I hope I could give you a starting point. Are you coming to Brescia? If so, I would be happy to show you how we do it for Kobtolino.

Joachim

--
You received this message because you are subscribed to the Google Groups "VA Smalltalk" group.
To unsubscribe from this group and stop receiving emails from it, send an email to va-smalltalk...@googlegroups.com.
To post to this group, send email to [hidden email].
Visit this group at <a href="http://groups.google.com/group/va-smalltalk" rel="nofollow" target="_blank" onmousedown="this.href='http://groups.google.com/group/va-smalltalk';return true;" onclick="this.href='http://groups.google.com/group/va-smalltalk';return true;">http://groups.google.com/group/va-smalltalk.
For more options, visit <a href="https://groups.google.com/d/optout" rel="nofollow" target="_blank" onmousedown="this.href='https://groups.google.com/d/optout';return true;" onclick="this.href='https://groups.google.com/d/optout';return true;">https://groups.google.com/d/optout.