The Trunk: Kernel-eem.1094.mcz

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

The Trunk: Kernel-eem.1094.mcz

commits-2
Eliot Miranda uploaded a new version of Kernel to project The Trunk:
http://source.squeak.org/trunk/Kernel-eem.1094.mcz

==================== Summary ====================

Name: Kernel-eem.1094
Author: eem
Time: 13 April 2017, 9:22:45.544636 am
UUID: ef197114-f2d6-437c-920f-1940bfe2b414
Ancestors: Kernel-eem.1093

Correct the SistaV1 bytecoders decoders up to immedately before the ensure4llocableSlots: bytecode (which is subject to change).

Add incomplete directedSuperSend:numArgs: support.

=============== Diff against Kernel-eem.1093 ===============

Item was added:
+ ----- Method: InstructionClient>>directedSuperSend:numArgs: (in category 'instruction decoding') -----
+ directedSuperSend: selector numArgs: numArgs
+ "Send Message Above Specific Class With Selector, selector, bytecode.
+ Start the lookup above the class that is the value of the association on
+ top of stack. The arguments  of the message are found in the top numArgs
+ stack locations beneath the association, and the receiver just below them."!

Item was added:
+ ----- Method: InstructionPrinter>>directedSuperSend:numArgs: (in category 'instruction decoding') -----
+ directedSuperSend: selector "<Symbol>" numArgs: numArgs "<SmallInteger>"
+ self print: 'directedSuperSend: ' , (self stringForSelector: selector numArgs: numArgs)!

Item was changed:
  ----- Method: InstructionStream>>interpretNext2ByteSistaV1Instruction:for:extA:extB:startPC: (in category 'decoding - private - sista v1') -----
  interpretNext2ByteSistaV1Instruction: bytecode for: client extA: extA extB: extB startPC: startPC
  "Send to the argument, client, a message that specifies the next instruction.
  This method handles the two-byte codes.
  For a table of the bytecode set, see EncoderForV1's class comment."
 
  | byte method |
  method := self method.
  byte := self method at: pc.
  pc := pc + 1.
  "We do an inline quasi-binary search on bytecode"
  bytecode < 234 ifTrue: "pushes"
  [bytecode < 231 ifTrue:
  [bytecode < 229 ifTrue:
  [| literal |
  bytecode = 226 ifTrue:
  [^client pushReceiverVariable: (extA bitShift: 8) + byte].
  literal := method literalAt: (extA bitShift: 8) + byte + 1.
  bytecode = 227 ifTrue:
  [^client pushLiteralVariable: literal].
  ^client pushConstant: literal].
  bytecode = 229 ifTrue:
  [^client pushTemporaryVariable: byte].
  ^self unusedBytecode: client at: startPC].
  bytecode = 231 ifTrue:
  [^byte < 128
  ifTrue: [client pushNewArrayOfSize: byte]
  ifFalse: [client pushConsArrayWithElements: byte - 128]].
  bytecode = 232 ifTrue:
  [^client pushConstant: ((extB < 128 ifTrue: [extB] ifFalse: [extB - 256]) bitShift: 8) + byte].
  ^client pushConstant: (Character value: (extB bitShift: 8) + byte)].
  bytecode < 240 ifTrue: "sends, trap and jump"
  [bytecode < 236 ifTrue: "sends"
+ [(bytecode = 235 and: [extB >= 64]) ifTrue:
+ [^client
+ directedSuperSend: (method literalAt: (extA bitShift: 5) + (byte // 8) + 1)
+ numArgs: (extB - 64 bitShift: 3) + (byte \\ 8)].
+ ^client
- [^client
  send: (method literalAt: (extA bitShift: 5) + (byte // 8) + 1)
  super: bytecode = 235
  numArgs: (extB bitShift: 3) + (byte \\ 8)].
  bytecode = 236 ifTrue:
+ [^self unusedBytecode: client at: startPC]. "reserved for ensureAllocableSlots:"
- [^client trapIfNotInstanceOf: (method literalAt: (extA bitShift: 8) + byte + 1)].
  bytecode = 237 ifTrue:
  [^client jump: (extB bitShift: 8) + byte].
  ^client jump: (extB bitShift: 8) + byte if: bytecode = 238].
  bytecode < 243 ifTrue:
  [bytecode = 240 ifTrue:
  [^client popIntoReceiverVariable: (extA bitShift: 8) + byte].
  bytecode = 241 ifTrue:
  [^client popIntoLiteralVariable: (method literalAt: (extA bitShift: 8) + byte + 1)].
  ^client popIntoTemporaryVariable: byte].
  bytecode = 243 ifTrue:
  [^client storeIntoReceiverVariable: (extA bitShift: 8) + byte].
  bytecode = 244 ifTrue:
  [^client storeIntoLiteralVariable: (method literalAt: (extA bitShift: 8) + byte + 1)].
  bytecode = 245 ifTrue:
  [^client storeIntoTemporaryVariable: byte].
  "246-247 1111011 i xxxxxxxx UNASSIGNED"
  ^self unusedBytecode: client at: startPC!

Item was changed:
  ----- Method: InstructionStream>>interpretNext3ByteSistaV1Instruction:for:extA:extB:startPC: (in category 'decoding - private - sista v1') -----
  interpretNext3ByteSistaV1Instruction: bytecode for: client extA: extA extB: extB startPC: startPC
  "Send to the argument, client, a message that specifies the next instruction.
  This method handles the three-byte codes.
  For a table of the bytecode set, see EncoderForSistaV1's class comment."
 
+ | method byte2 byte3 literal |
- | method byte2 byte3 |
  method := self method.
  byte2 := method at: pc.
  byte3 := method at: pc + 1.
  pc := pc + 2.
+
+ "** 248 (2) 11111000 iiiiiiii mssjjjjj Call Primitive #iiiiiiii + (jjjjj * 256)
+ m=1 means inlined primitive, no hard return after execution.
+ ss defines the unsafe operation set used to encode the operations.
+ (ss = 0 means sista unsafe operations, ss = 01 means lowcode operations, other numbers are not used)
+ Lowcode inlined primitives may have extensions."
- "we search the bytecodes by what we expect to be the static frequency."
  bytecode = 248 ifTrue:
+ [| primitiveSetSelector primitiveNumber |
+ byte3 < 128 ifTrue:
+ [ "Maybe this should be restricted to the 13 bit primitiveNumber too..."
+ ^client callPrimitive: byte2 + (byte3 bitShift: 8)].
+ primitiveSetSelector := (byte3 bitShift: -5) bitAnd: 3.
+ primitiveNumber := byte2 + ((byte3 bitAnd: 31) bitShift: 8).
+ primitiveSetSelector = 0 ifTrue: "Sista inline primitives"
+ [^client callInlinePrimitive: byte2 + (byte3 - 128 bitShift: 8)].
+ primitiveSetSelector = 1 ifTrue: "Lowcode inline primitives"
+ [^client callLowcodeInlinePrimitive: byte2 + (byte3 - 128 bitShift: 8) extA: extA extB: extB].
+ "fall through to ^self unusedBytecode: client at: startPC below"].
+
+ "* 249 11111001 xxxxxxxx siyyyyyy push Closure Compiled block literal index xxxxxxxx (+ Extend A * 256) numCopied yyyyyy receiverOnStack: s = 1 ignoreOuterContext: i = 1"
+ bytecode = 249 ifTrue:
+ [literal := method literalAt: (extA bitShift: 8) + byte2 + 1.
+ (byte3 noMask: 16rC0) ifTrue:
+ [^client pushFullClosure: literal numCopied: byte3].
+ ^client
+ pushFullClosure: literal
+ numCopied: (byte3 bitAnd: 16r3F)
+ receiverOnStack: (byte3 anyMask: 16r80)
+ ignoreOuterContext: (byte3 anyMask: 16r40)].
- [^client callPrimitive: byte2 + (byte3 bitShift: 8)].
  bytecode = 250 ifTrue:
  ["** 250  11111010  eeiiikkk  jjjjjjjj  Push Closure Num Copied iii (+ExtA//16*8) Num Args kkk (+ ExtA\\16*8) BlockSize jjjjjjjj (+ExtB*256). ee = num extensions"
  ^client
  pushClosureCopyNumCopiedValues: ((byte2 bitShift: -3) bitAnd: 7) + (extA // 16 bitShift: 3)
  numArgs: (byte2 bitAnd: 7) + (extA \\ 16 bitShift: 3)
  blockSize: byte3 + (extB bitShift: 8)].
  bytecode = 251 ifTrue:
  [^client pushRemoteTemp: byte2 inVectorAt: byte3].
  bytecode = 252 ifTrue:
  [^client storeIntoRemoteTemp: byte2 inVectorAt: byte3].
  bytecode = 253 ifTrue:
  [^client popIntoRemoteTemp: byte2 inVectorAt: byte3].
+ "** 254 11111110 kkkkkkkk jjjjjjjj branch If Not Instance Of Behavior/Array Of Behavior kkkkkkkk (+ Extend A * 256, where Extend A >= 0) distance jjjjjjjj (+ Extend B * 256, where Extend B >= 0)"
+ bytecode = 254 ifTrue: "The sign bit of extB inverts the operation.  Would like to have extB < -128, but this is good enough for now."
+ [literal := method literalAt: (extA bitShift: 8) + byte2 + 1.
+ extB < 0 ifTrue: [^client branchIfInstanceOf: literal distance: (extB + 128 bitShift: 8) + byte3].
+ ^client branchIfNotInstanceOf: literal distance: (extB bitShift: 8) + byte3].
- "249 11111001 xxxxxxxx syyyyyyy Reserved for Push Float"
- "254-255 1111111 i xxxxxxxx yyyyyyyy UNASSIGNED"
  ^self unusedBytecode: client at: startPC!

Item was changed:
  ----- Method: InstructionStream>>interpretNextSistaV1InstructionFor: (in category 'decoding - private - sista v1') -----
  interpretNextSistaV1InstructionFor: client
  "Send to the argument, client, a message that specifies the next instruction."
 
  | byte div16 offset method extA extB savedPC |
  method := self method.
  "For a table of the bytecode set, see EncoderForSistaV1's class comment."
  "consume and compute any extensions first."
  extA := extB := 0.
  savedPC := pc.
  [byte := self method at: pc.
  pc := pc + 1.
  byte >= 16rE0 and: [byte <= 16rE1]] whileTrue:
  [| extByte |
  extByte := self method at: pc.
  pc := pc + 1.
  byte = 16rE0
  ifTrue:
  [extA := (extA bitShift: 8) + extByte]
  ifFalse:
  [extB := (extB = 0 and: [extByte > 127])
  ifTrue: [extByte - 256]
  ifFalse: [(extB bitShift: 8) + extByte]]].
  div16 := byte // 16.
  offset := byte \\ 16.
  "We do an inline quasi-binary search on each of the possible 16 values of div16"
  div16 < 11 ifTrue:
  [div16 < 6 ifTrue:
  [div16 < 4 ifTrue:
  [div16 < 2 ifTrue:
  [div16 = 0 ifTrue:
  [^client pushReceiverVariable: offset].
  ^client pushLiteralVariable: (method literalAt: offset + 1)]. "div16 = 1"
  ^client pushConstant: (method literalAt: byte \\ 32 + 1)].
  div16 = 4 ifTrue:
  [offset < 12 ifTrue:
  [^client pushTemporaryVariable: offset].
  offset = 12 ifTrue:
  [^client pushReceiver].
  offset = 13 ifTrue:
  [^client pushConstant: true].
  offset = 14 ifTrue:
  [^client pushConstant: false].
  offset = 15 ifTrue:
  [^client pushConstant: nil]].
  "div16 = 5"
  offset < 2 ifTrue:
  [^client pushConstant: offset].
  offset = 2 ifTrue:
  [^self interpretSistaV1ExtendedPush: extB for: client].
  offset = 3 ifTrue:
  [^client doDup].
  offset = 8 ifTrue:
  [^client methodReturnReceiver].
  offset = 9 ifTrue:
  [^client methodReturnConstant: true].
  offset = 10 ifTrue:
  [^client methodReturnConstant: false].
  offset = 11 ifTrue:
  [^client methodReturnConstant: nil].
  offset = 12 ifTrue:
  [^client methodReturnTop].
  offset = 13 ifTrue:
  [^client blockReturnConstant: nil].
  offset = 14 ifTrue:
  [^client blockReturnTop].
  offset = 15 ifTrue:
  [^client doNop].
  ^self unusedBytecode: client at: savedPC].
  "short sends"
  div16 = 6 ifTrue:
  [^client
  send: (Smalltalk specialSelectorAt: offset + 1)
  super: false
  numArgs: (Smalltalk specialNargsAt: offset + 1)].
  div16 = 7 ifTrue:
  [^client
  send: (Smalltalk specialSelectorAt: offset + 17)
  super: false
  numArgs: (Smalltalk specialNargsAt: offset + 17)].
  ^client
  send: (method literalAt: offset + 1)
  super: false
  numArgs: div16 - 8].
  "div16 >= 11; bytecode >= 176"
  div16 < 14 ifTrue:
  [div16 = 11 ifTrue:
  [offset < 8 ifTrue:
  [^client jump: offset + 1].
  ^client jump: offset - 7 if: true].
  div16 = 12 ifTrue:
  [offset < 8 ifTrue:
  [^client jump: offset + 1 if: false].
  ^client popIntoReceiverVariable: offset - 8].
  "div16 = 13"
  offset < 8 ifTrue:
  [^client popIntoTemporaryVariable: offset].
  offset = 8 ifTrue:
  [^client doPop].
  offset = 9 ifTrue:
+ [^client trap].
- [^client doDup].
  ^self unusedBytecode: client at: savedPC].
  "2 byte and 3 byte codes"
  byte < 248 ifTrue:
  [^self interpretNext2ByteSistaV1Instruction: byte for: client extA: extA extB: extB startPC: savedPC].
  ^self interpretNext3ByteSistaV1Instruction: byte for: client extA: extA extB: extB startPC: savedPC!


Loading...