Ubuntu 18.04 subsystem under Windows 10 and Gemstone/S

Hey,

just did an installation and made it to work, though there were several points to remember:

* follow close the video instructions

* you have to manage services files both under Windows and Linux - otherwise it does not work

* connect under Jade against localhost - the ip# of the system is not working

* with the normal license file the stone dies after starting - CPUAffinity changes has been noticed and the stone is shut down. running with an unlimited license file is ok.

GsDevKit_home does not work - it still does not support 18.04 (this can be corrected), fails when calculating shared memory values (the subsystem does not deliver some numbers under ../kernel/...

Even if you install GsDevKit_home, the system compains, that pharo has a wrong exec file format and does not work. the 32bit subsystem has been installed ...

Marten

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

Hey,

just did an installation and made it to work, though there were several points to remember:

* follow close the video instructions

* you have to manage services files both under Windows and Linux - otherwise it does not work

* connect under Jade against localhost - the ip# of the system is not working

* with the normal license file the stone dies after starting - CPUAffinity changes has been noticed and the stone is shut down. running with an unlimited license file is ok.

GsDevKit_home does not work - it still does not support 18.04 (this can be corrected), fails when calculating shared memory values (the subsystem does not deliver some numbers under ../kernel/...

There is a pending pull request for 18.04 support for GsDevKit_home[1] ... do you have the exact errors that are occurring? Always helps to have the detailed error information ...

[1] https://github.com/GsDevKit/GsDevKit_home/pull/216

Even if you install GsDevKit_home, the system compains, that pharo has a wrong exec file format and does not work. the 32bit subsystem has been installed ...

the 32 bit library install is required for Pharo and the that is the fallout for not having 18.04 in the scripts ...

Marten

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

On Thu, Sep 20, 2018 at 04:36:18PM -0700, Dale Henrichs via Glass wrote:
> There is a pending pull request for 18.04 support for GsDevKit_home[1] ...
> do you have the exact errors that are occurring? Always helps to have the
> detailed error information ...
> [1] https://github.com/GsDevKit/GsDevKit_home/pull/216

I can confirm that GsDevKit_home works on Ubuntu 18.04. I installed and
have it running on my laptop earlier this week, by making the same
change referenced in the pull. (I realize Marten is talking about Ubuntu
on Windows 10 Linux...)

> the 32 bit library install is required for Pharo and the that is the fallout
> for not having 18.04 in the scripts ...

createClient works for Pharo 3. Failed for Pharo 5 and 6, because #close
was sent to FileReference which resulted in DNU. Didn't try for Pharo 4.
I've opened issue #219.

Pierce

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

GsDevKit_home is working under Plain Ubuntu 18.04, but it can not be installed out of the box, because it fails when comparing the running OS. Simply patching "installOsPrereqs" and it works.

Maren

Dale Henrichs via Glass <[hidden email]> hat am 21. September 2018 um 01:36 geschrieben:

On 09/19/2018 11:18 AM, Marten Feldtmann via Glass wrote:

Hey,

just did an installation and made it to work, though there were several points to remember:

* follow close the video instructions

* you have to manage services files both under Windows and Linux - otherwise it does not work

* connect under Jade against localhost - the ip# of the system is not working

* with the normal license file the stone dies after starting - CPUAffinity changes has been noticed and the stone is shut down. running with an unlimited license file is ok.

GsDevKit_home does not work - it still does not support 18.04 (this can be corrected), fails when calculating shared memory values (the subsystem does not deliver some numbers under ../kernel/...

There is a pending pull request for 18.04 support for GsDevKit_home[1] ... do you have the exact errors that are occurring? Always helps to have the detailed error information ...

[1] https://github.com/GsDevKit/GsDevKit_home/pull/216

Even if you install GsDevKit_home, the system compains, that pharo has a wrong exec file format and does not work. the 32bit subsystem has been installed ...

the 32 bit library install is required for Pharo and the that is the fallout for not having 18.04 in the scripts ...

Marten

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

 

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass

 

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass