Smalltalk › Frameworks & Tools › Seaside › Seaside General

Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

13 messages Options

Sanjay Minni

Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Hi

on trying to install Seaside on Pharo4 I get the following warning popup
===
This package depends on the following classes:
ContextPart
You must resolve these dependencies before you will be able to load these definitions:
localAt:
localAt:put:
localSize
serialiseOn:
Select Proceed to continue, or close this window to cancel the operation.
===
I selected [proceed] and the option Tools->seaside control panel did come and could start Zn server ...

but what is the warning and how to resolve it ?

and
just as a point of interest
how to get the Kom and Swazoo web servers as they are not appearing in the option "Add adaptor ..."

regards
Sanjay

cheers,
Sanjay

Philippe Marschall

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

On Thu, Nov 13, 2014 at 6:45 AM, Sanjay-M <[hidden email]> wrote:

> Hi
>
> on trying to install Seaside on Pharo4 I get the following warning popup
> ===
> This package depends on the following classes:
> ContextPart
> You must resolve these dependencies before you will be able to load these
> definitions:
> localAt:
> localAt:put:
> localSize
> serialiseOn:
> Select Proceed to continue, or close this window to cancel the operation.
> ===
> I selected [proceed] and the option Tools->seaside control panel did come
> and could start Zn server ...
>
> but what is the warning and how to resolve it ?

Switch to Seaside 3.2 ;-)

> and
> just as a point of interest
> how to get the Kom and Swazoo web servers as they are not appearing in the
> option "Add adaptor ..."

If you're using Metacello by loading the groups 'Kom' or 'Swazoo'.
They may or may not work in Pharo 4.

Cheers
Philippe
_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

Sanjay Minni

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Thanks Philippe

can you pls help me on how to loade seaside 3.2

In Monticello I added a repository
type HTTP - with the following info
"MCHttpRepository
location: 'http://smalltalkhub.com/mc/Seaside/Seaside32/main'
user: ''
password: ''
"

next popup is as folows - pls advice what is to be done

and incidentally how to get Kom / Swazoo

thanks
Sanjay

Philippe Marschall wrote

On Thu, Nov 13, 2014 at 6:45 AM, Sanjay-M <[hidden email]> wrote:
> Hi
>
> on trying to install Seaside on Pharo4 I get the following warning popup
> ===
> This package depends on the following classes:
> ContextPart
> You must resolve these dependencies before you will be able to load these
> definitions:
> localAt:
> localAt:put:
> localSize
> serialiseOn:
> Select Proceed to continue, or close this window to cancel the operation.
> ===
> I selected [proceed] and the option Tools->seaside control panel did come
> and could start Zn server ...
>
> but what is the warning and how to resolve it ?

Switch to Seaside 3.2 ;-)

> and
> just as a point of interest
> how to get the Kom and Swazoo web servers as they are not appearing in the
> option "Add adaptor ..."

If you're using Metacello by loading the groups 'Kom' or 'Swazoo'.
They may or may not work in Pharo 4.

Cheers
Philippe
_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

cheers,
Sanjay

Paul DeBruicker

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

You don't want Kom or Swazoo. You want to use Zinc. Its the only supported webserver with Pharo 3 & 4.

Load the ConfigurationOfSeaside3 from this metacello repo:

MCHttpRepository
location: 'http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'
user: ''
password: ''

Then in a workspace run

(ConfigurationOfSeaside 3 project version:'3.2.0') load: 'Tests'.

Hope this helps get you sorted

Paul

Sanjay-M wrote

Thanks Philippe

can you pls help me on how to loade seaside 3.2

In Monticello I added a repository
type HTTP - with the following info
"MCHttpRepository
location: 'http://smalltalkhub.com/mc/Seaside/Seaside32/main'
user: ''
password: ''
"

next popup is as folows - pls advice what is to be done

and incidentally how to get Kom / Swazoo

thanks
Sanjay

Philippe Marschall wrote

On Thu, Nov 13, 2014 at 6:45 AM, Sanjay-M <[hidden email]> wrote:
> Hi
>
> on trying to install Seaside on Pharo4 I get the following warning popup
> ===
> This package depends on the following classes:
> ContextPart
> You must resolve these dependencies before you will be able to load these
> definitions:
> localAt:
> localAt:put:
> localSize
> serialiseOn:
> Select Proceed to continue, or close this window to cancel the operation.
> ===
> I selected [proceed] and the option Tools->seaside control panel did come
> and could start Zn server ...
>
> but what is the warning and how to resolve it ?

Switch to Seaside 3.2 ;-)

> and
> just as a point of interest
> how to get the Kom and Swazoo web servers as they are not appearing in the
> option "Add adaptor ..."

If you're using Metacello by loading the groups 'Kom' or 'Swazoo'.
They may or may not work in Pharo 4.

Cheers
Philippe
_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

Sanjay Minni

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Thanks Paul but Nope I get the error and worse ...

i loaded ConfigurationOfSeaside3-JohanBrichau.218

I get the error
===
This package depends on the following classes:
ContextPart
You must resolve these dependencies before you will be able to load these definitions:
localAt:
localAt:put:
localSize
serialiseOn:
Select Proceed to continue, or close this window to cancel the operation.
===

and (worse ...)
in Seaside Control panel in Add Adaptor ...
I do not get the option ZnZinc Server
I only get WATestServerAdaptor which shows as Stopped - the [start] is disabled and I cannot remove either.

(also just for others who newbie like me who may be trying ... the command would be
(ConfigurationOfSeaside3 project version:'3.2.0') load: 'Tests'.
i.e. no space between ConfigurationOfSeaside and 3)

Thanks
Sanjay

cheers,
Sanjay

Philippe Marschall

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

In reply to this post by Sanjay Minni

On Thu, Nov 13, 2014 at 11:35 AM, Sanjay-M <[hidden email]> wrote:

> Thanks Philippe
>
> can you pls help me on how to loade seaside 3.2
>
> In Monticello I added a repository
> type HTTP - with the following info
> "MCHttpRepository
> location: 'http://smalltalkhub.com/mc/Seaside/Seaside32/main'
> user: ''
> password: ''
> "
>
> next popup is as folows - pls advice what is to be done
> <http://forum.world.st/file/n4789956/Pharo4Seaside32.jpg>
>
> and incidentally how to get Kom / Swazoo

Do you load "by hand" (select each package manually) or do you use Metacello?

Cheers
Philippe
_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

Sanjay Minni

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Philippe

here is what I do:

World Menu->Monticello Browser
click on [+repository]
Select->HTTP
in the Popup-Information Required
replace the current content with
MCHttpRepository
location: 'http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'
user: ''
password: ''
I get a Popup titled "Repository:http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main"
Select ConfigurationOfSeaside3 in the left Panel
Select ConfigurationOfSeaside3-JohanBrischau.218.mcz in the right panel
click on [Load]

... and then run in a workspace
(ConfigurationOfSeaside3 project version:'3.2.0') load: 'Tests'. by DoIt

regards
Sanjay

cheers,
Sanjay

Johan Brichau-2

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Mind that there is currently a bug in using the Zinc adaptor with (the not released) Seaside 3.2
I sent a patch to Sven so it should soon be available, so ensure to use the latest Zinc-Seaside package.

Johan

> On 15 Nov 2014, at 03:26, Sanjay-M <[hidden email]> wrote:
>
> Philippe
>
> here is what I do:
>
> World Menu->Monticello Browser
> click on [+repository]
> Select->HTTP
> in the Popup-Information Required
> replace the current content with
> MCHttpRepository
> location:
> 'http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'
> user: ''
> password: ''
> I get a Popup titled
> "Repository:http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main"
> Select ConfigurationOfSeaside3 in the left Panel
> Select ConfigurationOfSeaside3-JohanBrischau.218.mcz in the right panel
> click on [Load]
> <http://forum.world.st/file/n4790360/Seaside320Load.jpg>
>
> ... and then run in a workspace
> (ConfigurationOfSeaside3 project version:'3.2.0') load: 'Tests'. by DoIt
>
>
> regards
> Sanjay
>
>
>
> -----
> ---
> Regards, Sanjay
> --
> View this message in context: http://forum.world.st/Warning-on-installing-Seaside-3-1-on-Pharo4-0-build-40366-tp4789949p4790360.html
> Sent from the Seaside General mailing list archive at Nabble.com.
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

Sanjay Minni

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Thanks

but how to resolve this issue ?

===
This package depends on the following classes:
ContextPart
You must resolve these dependencies before you will be able to load these definitions:
localAt:
localAt:put:
localSize
serialiseOn:
Select Proceed to continue, or close this window to cancel the operation.
===

also am I using the right procedure to load the package as I have listed below:

Johan Brichau-2 wrote

Mind that there is currently a bug in using the Zinc adaptor with (the not released) Seaside 3.2
I sent a patch to Sven so it should soon be available, so ensure to use the latest Zinc-Seaside package.

Johan

> On 15 Nov 2014, at 03:26, Sanjay-M <[hidden email]> wrote:
>
> Philippe
>
> here is what I do:
>
> World Menu->Monticello Browser
> click on [+repository]
> Select->HTTP
> in the Popup-Information Required
> replace the current content with
> MCHttpRepository
> location:
> 'http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'
> user: ''
> password: ''
> I get a Popup titled
> "Repository:http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main"
> Select ConfigurationOfSeaside3 in the left Panel
> Select ConfigurationOfSeaside3-JohanBrischau.218.mcz in the right panel
> click on [Load]
> <http://forum.world.st/file/n4790360/Seaside320Load.jpg>
>
> ... and then run in a workspace
> (ConfigurationOfSeaside3 project version:'3.2.0') load: 'Tests'. by DoIt
>
>
> regards
> Sanjay
>
>
>
> -----
> ---
> Regards, Sanjay
> --
> View this message in context: http://forum.world.st/Warning-on-installing-Seaside-3-1-on-Pharo4-0-build-40366-tp4789949p4790360.html
> Sent from the Seaside General mailing list archive at Nabble.com.
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

cheers,
Sanjay

Sanjay Minni

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

also not sure if this has a bearing but none of the options in Halos is working

regards
Sanjay

Sanjay-M wrote

Thanks

but how to resolve this issue ?

===
This package depends on the following classes:
ContextPart
You must resolve these dependencies before you will be able to load these definitions:
localAt:
localAt:put:
localSize
serialiseOn:
Select Proceed to continue, or close this window to cancel the operation.
===

also am I using the right procedure to load the package as I have listed below:

Johan Brichau-2 wrote

Mind that there is currently a bug in using the Zinc adaptor with (the not released) Seaside 3.2
I sent a patch to Sven so it should soon be available, so ensure to use the latest Zinc-Seaside package.

Johan

> On 15 Nov 2014, at 03:26, Sanjay-M <[hidden email]> wrote:
>
> Philippe
>
> here is what I do:
>
> World Menu->Monticello Browser
> click on [+repository]
> Select->HTTP
> in the Popup-Information Required
> replace the current content with
> MCHttpRepository
> location:
> 'http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'
> user: ''
> password: ''
> I get a Popup titled
> "Repository:http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main"
> Select ConfigurationOfSeaside3 in the left Panel
> Select ConfigurationOfSeaside3-JohanBrischau.218.mcz in the right panel
> click on [Load]
> <http://forum.world.st/file/n4790360/Seaside320Load.jpg>
>
> ... and then run in a workspace
> (ConfigurationOfSeaside3 project version:'3.2.0') load: 'Tests'. by DoIt
>
>
> regards
> Sanjay
>
>
>
> -----
> ---
> Regards, Sanjay
> --
> View this message in context: http://forum.world.st/Warning-on-installing-Seaside-3-1-on-Pharo4-0-build-40366-tp4789949p4790360.html
> Sent from the Seaside General mailing list archive at Nabble.com.
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

cheers,
Sanjay

Paul DeBruicker

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

In reply to this post by Sanjay Minni

If you don't have to use Pharo 4, you might be better off using Pharo 3 as Pharo 4 is beta and I think not officially supported by the Seaside team just yet.

Sanjay-M wrote

Thanks

but how to resolve this issue ?

===
This package depends on the following classes:
ContextPart
You must resolve these dependencies before you will be able to load these definitions:
localAt:
localAt:put:
localSize
serialiseOn:
Select Proceed to continue, or close this window to cancel the operation.
===

also am I using the right procedure to load the package as I have listed below:

Johan Brichau-2 wrote

Mind that there is currently a bug in using the Zinc adaptor with (the not released) Seaside 3.2
I sent a patch to Sven so it should soon be available, so ensure to use the latest Zinc-Seaside package.

Johan

> On 15 Nov 2014, at 03:26, Sanjay-M <[hidden email]> wrote:
>
> Philippe
>
> here is what I do:
>
> World Menu->Monticello Browser
> click on [+repository]
> Select->HTTP
> in the Popup-Information Required
> replace the current content with
> MCHttpRepository
> location:
> 'http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'
> user: ''
> password: ''
> I get a Popup titled
> "Repository:http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main"
> Select ConfigurationOfSeaside3 in the left Panel
> Select ConfigurationOfSeaside3-JohanBrischau.218.mcz in the right panel
> click on [Load]
> <http://forum.world.st/file/n4790360/Seaside320Load.jpg>
>
> ... and then run in a workspace
> (ConfigurationOfSeaside3 project version:'3.2.0') load: 'Tests'. by DoIt
>
>
> regards
> Sanjay
>
>
>
> -----
> ---
> Regards, Sanjay
> --
> View this message in context: http://forum.world.st/Warning-on-installing-Seaside-3-1-on-Pharo4-0-build-40366-tp4789949p4790360.html
> Sent from the Seaside General mailing list archive at Nabble.com.
> _______________________________________________
> seaside mailing list
> [hidden email]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

_______________________________________________
seaside mailing list
[hidden email]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

Sanjay Minni

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

This post was updated on .

I could continue on Pharo3 but just that I thought Seaside is quite glued to Pharo and maybe would also develop in parallel.

(I am in adapting stages to Pharo+seaside from other platforms and wanted to get used to upcoming (Pharo) version for products I have in mind)

cheers,
Sanjay

Sean P. DeNigris

Re: Warning on installing Seaside(3.1) on Pharo4.0 (build 40366)

Administrator

In reply to this post by Sanjay Minni

Sanjay Minni wrote

on trying to install Seaside on Pharo4 I get the following warning popup

Sanjay, I stumbled upon this old thread. Hoepfully, you got this sorted long ago, but if not, Seaside 3.1 can now be installed on Pharo 4.0 via the Configuration Browser. HTH.

Cheers,
Sean