amber 0.13 init on Ubuntu derivative

>Hello
>
>I am installing Amber 0.13.0-pre on an Ubuntu derivative.  The
>
>    amber init
>
>command does not run completely. Thus the legacy and the Helios IDE do not open.
>
>Do you have suggestions please how to fix this?
>
>Thank you in advance
>
>Hannes
>
>----------------------------------------------------------------------------------------------------------
>Installation activities log
>----------------------------------------------------------------------------------------------------------
>
>(Note: previous amber is 0.12.4, no de-installation)
>
>sudo npm -g install amber-cli@~0.13.0
>npm install -g requirejs
>
>mkdir amber13test3
>cd amber13test3
>amber init
>
>...... snip....
>
>
>codemirror#3.24.0 bower_components/codemirror
>
>bootstrap2.3.2#2.3.2 bower_components/bootstrap2.3.2
>└── jquery#2.0.3
>
>showdown#0.3.1 bower_components/showdown
>npm install exec error:
>{ [Error: Command failed: npm http GET https://registry.npmjs.org/grunt
>npm http GET https://registry.npmjs.org/grunt-contrib-clean
>npm http GET https://registry.npmjs.org/grunt-execute
>npm http GET https://registry.npmjs.org/amber-dev
>npm http 304 https://registry.npmjs.org/grunt
>npm http 304 https://registry.npmjs.org/grunt-contrib-clean
>npm ERR! Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds'
>npm ERR!  { [Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds']
>npm ERR!   errno: 3,
>npm ERR!   code: 'EACCES',
>npm ERR!   path: '/home/hhzl/tmp/npm-5184-idT59yds' }
>npm ERR!
>npm ERR! Please try running this command again as root/Administrator.
>
>npm ERR! System Linux 3.8.0-34-generic
>npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install"
>npm ERR! cwd /home/hhzl/Documents/ambertest3
>npm ERR! node -v v0.10.22
>npm ERR! npm -v 1.3.14
>npm ERR! path /home/hhzl/tmp/npm-5184-idT59yds
>npm ERR! code EACCES
>npm ERR! errno 3
>npm ERR! stack Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds'
>npm http 304 https://registry.npmjs.org/grunt-execute
>npm http 304 https://registry.npmjs.org/amber-dev
>npm ERR!
>npm ERR! Additional logging details can be found in:
>npm ERR!     /home/hhzl/Documents/ambertest3/npm-debug.log
>npm ERR! not ok code 0
>] killed: false, code: 3, signal: null }
>hhzl@hhzl-Latitude-E6400 ~/Documents/ambertest3 $
>
>
>----------------------------------------------------------------------------------------------------------
>Another attempt  -- run amber init with administrator priviledge
>Installation activities log
>----------------------------------------------------------------------------------------------------------
>
>
>
>mkdir ambertest4
>cd ambertest4
>sudo amber init
>
>....
>Writing Gruntfile.js...OK
>Writing README.md...OK
>Writing app.build.js...OK
>Writing .gitignore...OK
>Writing index.html...OK
>Writing local.amd.json...OK
>Writing src/Ambertest4.js...OK
>Writing src/Ambertest4.st...OK
>Writing src/Ambertest4-Tests.js...OK
>Writing src/Ambertest4-Tests.st...OK
>Writing LICENSE-MIT...OK
>Writing package.json...OK
>
>Initialized from template "grunt-init-amber".
>You need to have these installed globally via npm: amber-cli_; _grunt-cli_;
>_bower. Now, install project dependencies with bower install, tool
>dependencies with npm install and optionally, recompile with grunt. If you
>are running amber init, these three tasks are going to be performed for you
>now. Afterwards, start the development server with amber serve. Your
>application is then accessible via http://localhost:4000/
>
>Done, without errors.
>bower install exec error:
>{ [Error: Command failed: bower ESUDO         Cannot be run with sudo
>
>Additional error details:
>Since bower is a user command, there is no need to execute it with
>superuser permissions.
>If you're having permission errors when using bower without sudo,
>please spend a few minutes learning more about how your system should
>work and make any necessary repairs.
>
>http://www.joyent.com/blog/installing-node-and-npm
>https://gist.github.com/isaacs/579814
>
>You can however run a command with sudo using --allow-root option
>] killed: false, code: 1, signal: null }
>hhzl@hhzl-Latitude-E6400 ~/Documents/ambertest4 $
>
>--
>You received this message because you are subscribed to the Google Groups "amber-lang" group.
>To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
>For more options, visit https://groups.google.com/d/optout.

>
> "H. Hirzel" <[hidden email]>napísal/a:
>
>>Hello
>>
>>I am installing Amber 0.13.0-pre on an Ubuntu derivative.  The
>>
>>    amber init
>>
>>command does not run completely. Thus the legacy and the Helios IDE do not
>> open.
>>
>>Do you have suggestions please how to fix this?
>>
>>Thank you in advance
>>
>>Hannes
>>
>>----------------------------------------------------------------------------------------------------------
>>Installation activities log
>>----------------------------------------------------------------------------------------------------------
>>
>>(Note: previous amber is 0.12.4, no de-installation)
>>
>>sudo npm -g install amber-cli@~0.13.0
>>npm install -g requirejs
>>
>>mkdir amber13test3
>>cd amber13test3
>>amber init
>>
>>...... snip....
>>
>>
>>codemirror#3.24.0 bower_components/codemirror
>>
>>bootstrap2.3.2#2.3.2 bower_components/bootstrap2.3.2
>>└── jquery#2.0.3
>>
>>showdown#0.3.1 bower_components/showdown
>>npm install exec error:
>>{ [Error: Command failed: npm http GET https://registry.npmjs.org/grunt
>>npm http GET https://registry.npmjs.org/grunt-contrib-clean
>>npm http GET https://registry.npmjs.org/grunt-execute
>>npm http GET https://registry.npmjs.org/amber-dev
>>npm http 304 https://registry.npmjs.org/grunt
>>npm http 304 https://registry.npmjs.org/grunt-contrib-clean
>>npm ERR! Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds'
>>npm ERR!  { [Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds']
>>npm ERR!   errno: 3,
>>npm ERR!   code: 'EACCES',
>>npm ERR!   path: '/home/hhzl/tmp/npm-5184-idT59yds' }
>>npm ERR!
>>npm ERR! Please try running this command again as root/Administrator.
>>
>>npm ERR! System Linux 3.8.0-34-generic
>>npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install"
>>npm ERR! cwd /home/hhzl/Documents/ambertest3
>>npm ERR! node -v v0.10.22
>>npm ERR! npm -v 1.3.14
>>npm ERR! path /home/hhzl/tmp/npm-5184-idT59yds
>>npm ERR! code EACCES
>>npm ERR! errno 3
>>npm ERR! stack Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds'
>>npm http 304 https://registry.npmjs.org/grunt-execute
>>npm http 304 https://registry.npmjs.org/amber-dev
>>npm ERR!
>>npm ERR! Additional logging details can be found in:
>>npm ERR!     /home/hhzl/Documents/ambertest3/npm-debug.log
>>npm ERR! not ok code 0
>>] killed: false, code: 3, signal: null }
>>hhzl@hhzl-Latitude-E6400 ~/Documents/ambertest3 $
>>
>>
>>----------------------------------------------------------------------------------------------------------
>>Another attempt  -- run amber init with administrator priviledge
>>Installation activities log
>>----------------------------------------------------------------------------------------------------------
>>
>>
>>
>>mkdir ambertest4
>>cd ambertest4
>>sudo amber init
>>
>>....
>>Writing Gruntfile.js...OK
>>Writing README.md...OK
>>Writing app.build.js...OK
>>Writing .gitignore...OK
>>Writing index.html...OK
>>Writing local.amd.json...OK
>>Writing src/Ambertest4.js...OK
>>Writing src/Ambertest4.st...OK
>>Writing src/Ambertest4-Tests.js...OK
>>Writing src/Ambertest4-Tests.st...OK
>>Writing LICENSE-MIT...OK
>>Writing package.json...OK
>>
>>Initialized from template "grunt-init-amber".
>>You need to have these installed globally via npm: amber-cli_;
>> _grunt-cli_;
>>_bower. Now, install project dependencies with bower install, tool
>>dependencies with npm install and optionally, recompile with grunt. If you
>>are running amber init, these three tasks are going to be performed for
>> you
>>now. Afterwards, start the development server with amber serve. Your
>>application is then accessible via http://localhost:4000/
>>
>>Done, without errors.
>>bower install exec error:
>>{ [Error: Command failed: bower ESUDO         Cannot be run with sudo
>>
>>Additional error details:
>>Since bower is a user command, there is no need to execute it with
>>superuser permissions.
>>If you're having permission errors when using bower without sudo,
>>please spend a few minutes learning more about how your system should
>>work and make any necessary repairs.
>>
>>http://www.joyent.com/blog/installing-node-and-npm
>>https://gist.github.com/isaacs/579814
>>
>>You can however run a command with sudo using --allow-root option
>>] killed: false, code: 1, signal: null }
>>hhzl@hhzl-Latitude-E6400 ~/Documents/ambertest4 $
>>
>>--
>>You received this message because you are subscribed to the Google Groups
>> "amber-lang" group.
>>To unsubscribe from this group and stop receiving emails from it, send an
>> email to [hidden email].
>>For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "amber-lang" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [hidden email].
> For more options, visit https://groups.google.com/d/optout.
>

> Thank you Herby, the issue is no fixed.
>
> On 9/8/14, Herby Vojčík <[hidden email]> wrote:
>> Well, occasionally npm has outages, so it may be that http request fails.
>>
>> OTOH, this seems like real access right problem on your side. Did you
>> chech
>> that /home/hhzl/tmp which was common cause of all problems?
>
> No
>
>> Did you have
>> write access there? It may be you ran something with sudo before so it
>> has
>> root as an owner.
>>
>
> The tmp directory was owned by the  'root' user. Changing the owner to
> the current user fixed the issue.
>
>
> I  then had node.js in a local
>     /home/user/bin
> directory for the user and added the path to the .profile.
>
>    PATH="$HOME/bin:/home/user/bin/node-v0.10.31-linux-x86/bin:$PATH"
>
> Then I did not have to use sudo for amber.
>
> The history of commands
>
> sudo apt-get install git
>
> npm -g install amber-cli@~0.13.0
> npm -g install bower
> npm -g install grunt-cli
> npm -g install requirejs
> cd Documents/
> mkdir ambertest13
> cd ambertest13
> amber init
> amber serve
> point browser to localhost:4000
>
>>
>> "H. Hirzel" <[hidden email]>napísal/a:
>>
>>>Hello
>>>
>>>I am installing Amber 0.13.0-pre on an Ubuntu derivative.  The
>>>
>>>    amber init
>>>
>>>command does not run completely. Thus the legacy and the Helios IDE do
>>> not
>>> open.
>>>
>>>Do you have suggestions please how to fix this?
>>>
>>>Thank you in advance
>>>
>>>Hannes
>>>
>>>----------------------------------------------------------------------------------------------------------
>>>Installation activities log
>>>----------------------------------------------------------------------------------------------------------
>>>
>>>(Note: previous amber is 0.12.4, no de-installation)
>>>
>>>sudo npm -g install amber-cli@~0.13.0
>>>npm install -g requirejs
>>>
>>>mkdir amber13test3
>>>cd amber13test3
>>>amber init
>>>
>>>...... snip....
>>>
>>>
>>>codemirror#3.24.0 bower_components/codemirror
>>>
>>>bootstrap2.3.2#2.3.2 bower_components/bootstrap2.3.2
>>>└── jquery#2.0.3
>>>
>>>showdown#0.3.1 bower_components/showdown
>>>npm install exec error:
>>>{ [Error: Command failed: npm http GET https://registry.npmjs.org/grunt
>>>npm http GET https://registry.npmjs.org/grunt-contrib-clean
>>>npm http GET https://registry.npmjs.org/grunt-execute
>>>npm http GET https://registry.npmjs.org/amber-dev
>>>npm http 304 https://registry.npmjs.org/grunt
>>>npm http 304 https://registry.npmjs.org/grunt-contrib-clean
>>>npm ERR! Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds'
>>>npm ERR!  { [Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds']
>>>npm ERR!   errno: 3,
>>>npm ERR!   code: 'EACCES',
>>>npm ERR!   path: '/home/hhzl/tmp/npm-5184-idT59yds' }
>>>npm ERR!
>>>npm ERR! Please try running this command again as root/Administrator.
>>>
>>>npm ERR! System Linux 3.8.0-34-generic
>>>npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install"
>>>npm ERR! cwd /home/hhzl/Documents/ambertest3
>>>npm ERR! node -v v0.10.22
>>>npm ERR! npm -v 1.3.14
>>>npm ERR! path /home/hhzl/tmp/npm-5184-idT59yds
>>>npm ERR! code EACCES
>>>npm ERR! errno 3
>>>npm ERR! stack Error: EACCES, mkdir '/home/hhzl/tmp/npm-5184-idT59yds'
>>>npm http 304 https://registry.npmjs.org/grunt-execute
>>>npm http 304 https://registry.npmjs.org/amber-dev
>>>npm ERR!
>>>npm ERR! Additional logging details can be found in:
>>>npm ERR!     /home/hhzl/Documents/ambertest3/npm-debug.log
>>>npm ERR! not ok code 0
>>>] killed: false, code: 3, signal: null }
>>>hhzl@hhzl-Latitude-E6400 ~/Documents/ambertest3 $
>>>
>>>
>>>----------------------------------------------------------------------------------------------------------
>>>Another attempt  -- run amber init with administrator priviledge
>>>Installation activities log
>>>----------------------------------------------------------------------------------------------------------
>>>
>>>
>>>
>>>mkdir ambertest4
>>>cd ambertest4
>>>sudo amber init
>>>
>>>....
>>>Writing Gruntfile.js...OK
>>>Writing README.md...OK
>>>Writing app.build.js...OK
>>>Writing .gitignore...OK
>>>Writing index.html...OK
>>>Writing local.amd.json...OK
>>>Writing src/Ambertest4.js...OK
>>>Writing src/Ambertest4.st...OK
>>>Writing src/Ambertest4-Tests.js...OK
>>>Writing src/Ambertest4-Tests.st...OK
>>>Writing LICENSE-MIT...OK
>>>Writing package.json...OK
>>>
>>>Initialized from template "grunt-init-amber".
>>>You need to have these installed globally via npm: amber-cli_;
>>> _grunt-cli_;
>>>_bower. Now, install project dependencies with bower install, tool
>>>dependencies with npm install and optionally, recompile with grunt. If
>>> you
>>>are running amber init, these three tasks are going to be performed for
>>> you
>>>now. Afterwards, start the development server with amber serve. Your
>>>application is then accessible via http://localhost:4000/
>>>
>>>Done, without errors.
>>>bower install exec error:
>>>{ [Error: Command failed: bower ESUDO         Cannot be run with sudo
>>>
>>>Additional error details:
>>>Since bower is a user command, there is no need to execute it with
>>>superuser permissions.
>>>If you're having permission errors when using bower without sudo,
>>>please spend a few minutes learning more about how your system should
>>>work and make any necessary repairs.
>>>
>>>http://www.joyent.com/blog/installing-node-and-npm
>>>https://gist.github.com/isaacs/579814
>>>
>>>You can however run a command with sudo using --allow-root option
>>>] killed: false, code: 1, signal: null }
>>>hhzl@hhzl-Latitude-E6400 ~/Documents/ambertest4 $
>>>
>>>--
>>>You received this message because you are subscribed to the Google Groups
>>> "amber-lang" group.
>>>To unsubscribe from this group and stop receiving emails from it, send an
>>> email to [hidden email].
>>>For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "amber-lang" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [hidden email].
>> For more options, visit https://groups.google.com/d/optout.
>>
>