[github] Learning to use github....

> You can create a directory package.
>
> Then, from command line
>
> git status
>
> to see the changed files
>
> git add .
>
> to add all pending changed files to index (the pre-commit internal
> directory of git)
>
> git add -u
>
> to remove deleted files from git index
>
> then
>
> git commit -m "The message"
>
> I use the command line git (not the git bash), in Windows. There is a
> git.cmd in the program files git install directory, and I added that
> directory to my path, AFAIR
>
> On Sun, Dec 30, 2012 at 4:18 PM, H. Hirzel <[hidden email]> wrote:
>
>> Hello
>>
>> I am still in the process of learning how to use github. I understand
>> it allows for various kinds of setups and workflows.
>>
>> What I just did is
>>
>> 1) Installed git for Windows   http://msysgit.github.com/
>> 2) Used the 'git bash' command line interface. I think it is easier to
>> use than the GUI in the end. The GUI is a bit confusing to me, whereas
>> using the command line and following instructions like
>> https://help.github.com/articles/fork-a-repo is straightforward
>>
>> 3) I followed the instructions to clone my repository
>>     https://github.com/hhzl/Cuis
>>
>> I had forked recently from
>>
>>     https://github.com/jvuletich/Cuis
>>
>> Then I wanted to get the changes of Juan he did recently.
>>
>> So I did
>>
>>     git remote add upstream https://github.com/jvuletich/Cuis.git
>>
>>     git fetch upstream
>>
>>     git merge upstream/master
>>
>>
>> This gave me a local copy of the file
>>
>>    ListOfCuisPackages.md
>>
>> German and I had made in the last days and which Juan had added in the
>> meantime to his repository.
>>
>> The next thing I would like to figure out how to add a subdirectory
>> 'packages' which is under the control of git and put external *.pck
>> files I have tested there.
>>
>> Regards
>> --Hannes
>>
>> _______________________________________________
>> Cuis mailing list
>> [hidden email]
>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>
>

> Thank you Angel. This is helpful.
>
> As for now I changed the file README.md (fixes of the markdown so that
> bullet lists show).
>
> I did in Git bash (under Windows 7) (recalling from memory as the
> command line history is gone because of a restart)
>
> git add README.md
>
> git commit
>
> (I had an error message because user name / email was not set, the
> instructions to do that were included)
>
> and then
>
>     git push origin master
>
>
> whereas origin in this case is
>     https://github.com/hhzl/Cuis
>
> I had set that earlier
>
> and
>    master
> is the main and only branch.
>
>
> I had to struggle a bit with the vim editor which comes with the GIT
> bash shell. But as I want to work on Linux as well I do not mind.
>
> Then I did a pull request on Github by pressing the 'Pull request'
> button in the middle of the second row of https://github.com/hhzl/Cuis
> at the top.
>
> I realize that I now should learn how to create a branch, so that the
> change is done in a branch and not in the 'master' branch.
>
> Happy New Year 2013
>
> --Hannes
>
>
>
>
> NOTE:
> https://help.github.com/articles/using-pull-requests
>
> mentions two popular models
>
> * Fork & Pull
> * Shared Repository Model
>
> It seems that 'Shared Repository Model' is equivalent to the Squeak
> 'Trunk' approach?
>
> At the moment we have the 'Fork & Pull' model. And there seem to be more
> models.
>
>
>
>
> On 12/30/12, Angel Java Lopez <[hidden email]> wrote:
>> You can create a directory package.
>>
>> Then, from command line
>>
>> git status
>>
>> to see the changed files
>>
>> git add .
>>
>> to add all pending changed files to index (the pre-commit internal
>> directory of git)
>>
>> git add -u
>>
>> to remove deleted files from git index
>>
>> then
>>
>> git commit -m "The message"
>>
>> I use the command line git (not the git bash), in Windows. There is a
>> git.cmd in the program files git install directory, and I added that
>> directory to my path, AFAIR
>>
>> On Sun, Dec 30, 2012 at 4:18 PM, H. Hirzel <[hidden email]>
>> wrote:
>>
>>> Hello
>>>
>>> I am still in the process of learning how to use github. I understand
>>> it allows for various kinds of setups and workflows.
>>>
>>> What I just did is
>>>
>>> 1) Installed git for Windows   http://msysgit.github.com/
>>> 2) Used the 'git bash' command line interface. I think it is easier to
>>> use than the GUI in the end. The GUI is a bit confusing to me, whereas
>>> using the command line and following instructions like
>>> https://help.github.com/articles/fork-a-repo is straightforward
>>>
>>> 3) I followed the instructions to clone my repository
>>>     https://github.com/hhzl/Cuis
>>>
>>> I had forked recently from
>>>
>>>     https://github.com/jvuletich/Cuis
>>>
>>> Then I wanted to get the changes of Juan he did recently.
>>>
>>> So I did
>>>
>>>     git remote add upstream https://github.com/jvuletich/Cuis.git
>>>
>>>     git fetch upstream
>>>
>>>     git merge upstream/master
>>>
>>>
>>> This gave me a local copy of the file
>>>
>>>    ListOfCuisPackages.md
>>>
>>> German and I had made in the last days and which Juan had added in the
>>> meantime to his repository.
>>>
>>> The next thing I would like to figure out how to add a subdirectory
>>> 'packages' which is under the control of git and put external *.pck
>>> files I have tested there.
>>>
>>> Regards
>>> --Hannes
>>>
>>> _______________________________________________
>>> Cuis mailing list
>>> [hidden email]
>>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>>
>>
>

> Yes, shared repository model is when you have many committers to the
> central repo. They can collaborate to accept and test pull requests, too. I
> suppose that is alike the Squeak trunk, but I don't know the details.
>
> On Mon, Dec 31, 2012 at 5:20 AM, H. Hirzel <[hidden email]> wrote:
>
>> Thank you Angel. This is helpful.
>>
>> As for now I changed the file README.md (fixes of the markdown so that
>> bullet lists show).
>>
>> I did in Git bash (under Windows 7) (recalling from memory as the
>> command line history is gone because of a restart)
>>
>> git add README.md
>>
>> git commit
>>
>> (I had an error message because user name / email was not set, the
>> instructions to do that were included)
>>
>> and then
>>
>>     git push origin master
>>
>>
>> whereas origin in this case is
>>     https://github.com/hhzl/Cuis
>>
>> I had set that earlier
>>
>> and
>>    master
>> is the main and only branch.
>>
>>
>> I had to struggle a bit with the vim editor which comes with the GIT
>> bash shell. But as I want to work on Linux as well I do not mind.
>>
>> Then I did a pull request on Github by pressing the 'Pull request'
>> button in the middle of the second row of https://github.com/hhzl/Cuis
>> at the top.
>>
>> I realize that I now should learn how to create a branch, so that the
>> change is done in a branch and not in the 'master' branch.
>>
>> Happy New Year 2013
>>
>> --Hannes
>>
>>
>>
>>
>> NOTE:
>> https://help.github.com/articles/using-pull-requests
>>
>> mentions two popular models
>>
>> * Fork & Pull
>> * Shared Repository Model
>>
>> It seems that 'Shared Repository Model' is equivalent to the Squeak
>> 'Trunk' approach?
>>
>> At the moment we have the 'Fork & Pull' model. And there seem to be more
>> models.
>>
>>
>>
>>
>> On 12/30/12, Angel Java Lopez <[hidden email]> wrote:
>> > You can create a directory package.
>> >
>> > Then, from command line
>> >
>> > git status
>> >
>> > to see the changed files
>> >
>> > git add .
>> >
>> > to add all pending changed files to index (the pre-commit internal
>> > directory of git)
>> >
>> > git add -u
>> >
>> > to remove deleted files from git index
>> >
>> > then
>> >
>> > git commit -m "The message"
>> >
>> > I use the command line git (not the git bash), in Windows. There is a
>> > git.cmd in the program files git install directory, and I added that
>> > directory to my path, AFAIR
>> >
>> > On Sun, Dec 30, 2012 at 4:18 PM, H. Hirzel <[hidden email]>
>> wrote:
>> >
>> >> Hello
>> >>
>> >> I am still in the process of learning how to use github. I understand
>> >> it allows for various kinds of setups and workflows.
>> >>
>> >> What I just did is
>> >>
>> >> 1) Installed git for Windows   http://msysgit.github.com/
>> >> 2) Used the 'git bash' command line interface. I think it is easier to
>> >> use than the GUI in the end. The GUI is a bit confusing to me, whereas
>> >> using the command line and following instructions like
>> >> https://help.github.com/articles/fork-a-repo is straightforward
>> >>
>> >> 3) I followed the instructions to clone my repository
>> >>     https://github.com/hhzl/Cuis
>> >>
>> >> I had forked recently from
>> >>
>> >>     https://github.com/jvuletich/Cuis
>> >>
>> >> Then I wanted to get the changes of Juan he did recently.
>> >>
>> >> So I did
>> >>
>> >>     git remote add upstream https://github.com/jvuletich/Cuis.git
>> >>
>> >>     git fetch upstream
>> >>
>> >>     git merge upstream/master
>> >>
>> >>
>> >> This gave me a local copy of the file
>> >>
>> >>    ListOfCuisPackages.md
>> >>
>> >> German and I had made in the last days and which Juan had added in the
>> >> meantime to his repository.
>> >>
>> >> The next thing I would like to figure out how to add a subdirectory
>> >> 'packages' which is under the control of git and put external *.pck
>> >> files I have tested there.
>> >>
>> >> Regards
>> >> --Hannes
>> >>
>> >> _______________________________________________
>> >> Cuis mailing list
>> >> [hidden email]
>> >> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>> >>
>> >
>>
>> _______________________________________________
>> Cuis mailing list
>> [hidden email]
>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>
>

> I am learning to use branches ....
>
> I did in my Windows Git bash shell
>
>     git checkout -b SimpleLogger
>
> This creates a new branch called 'SimpleLogger'  (
> http://gitimmersion.com/lab_24.html ) and make the new branch active.
>
>   cd packages
>   mkdir SimpleLogger
>
> Then I copied in the files from German which I got from
> https://github.com/garduino/Cuis-SimpleLogger
>
>   cd ..
>
> and I did
>   git add .
>
> git commit -m "created a branch SimpleLogger and added
> https://github.com/garduino/Cuis-SimpleLogger"
>
> git push origin SimpleLogger
>
> The result may be inspected on
>
> https://github.com/hhzl/Cuis/
>
> It has two branches
>
> The branch 'SimpleLogger' has a subdirectory 'SimpleLogger' in the
> 'packages' directory whereas 'master' does not.
>
> I think this is a way to port packages. Do the development in a branch
> rather than in a separate github repository in a fork of
> https://github.com/jvuletich/Cuis
>
>
> --Hannes
>
>
>
>
>
>
> On 12/31/12, Angel Java Lopez <[hidden email]> wrote:
>> Yes, shared repository model is when you have many committers to the
>> central repo. They can collaborate to accept and test pull requests, too.
>> I
>> suppose that is alike the Squeak trunk, but I don't know the details.
>>
>> On Mon, Dec 31, 2012 at 5:20 AM, H. Hirzel <[hidden email]>
>> wrote:
>>
>>> Thank you Angel. This is helpful.
>>>
>>> As for now I changed the file README.md (fixes of the markdown so that
>>> bullet lists show).
>>>
>>> I did in Git bash (under Windows 7) (recalling from memory as the
>>> command line history is gone because of a restart)
>>>
>>> git add README.md
>>>
>>> git commit
>>>
>>> (I had an error message because user name / email was not set, the
>>> instructions to do that were included)
>>>
>>> and then
>>>
>>>     git push origin master
>>>
>>>
>>> whereas origin in this case is
>>>     https://github.com/hhzl/Cuis
>>>
>>> I had set that earlier
>>>
>>> and
>>>    master
>>> is the main and only branch.
>>>
>>>
>>> I had to struggle a bit with the vim editor which comes with the GIT
>>> bash shell. But as I want to work on Linux as well I do not mind.
>>>
>>> Then I did a pull request on Github by pressing the 'Pull request'
>>> button in the middle of the second row of https://github.com/hhzl/Cuis
>>> at the top.
>>>
>>> I realize that I now should learn how to create a branch, so that the
>>> change is done in a branch and not in the 'master' branch.
>>>
>>> Happy New Year 2013
>>>
>>> --Hannes
>>>
>>>
>>>
>>>
>>> NOTE:
>>> https://help.github.com/articles/using-pull-requests
>>>
>>> mentions two popular models
>>>
>>> * Fork & Pull
>>> * Shared Repository Model
>>>
>>> It seems that 'Shared Repository Model' is equivalent to the Squeak
>>> 'Trunk' approach?
>>>
>>> At the moment we have the 'Fork & Pull' model. And there seem to be more
>>> models.
>>>
>>>
>>>
>>>
>>> On 12/30/12, Angel Java Lopez <[hidden email]> wrote:
>>> > You can create a directory package.
>>> >
>>> > Then, from command line
>>> >
>>> > git status
>>> >
>>> > to see the changed files
>>> >
>>> > git add .
>>> >
>>> > to add all pending changed files to index (the pre-commit internal
>>> > directory of git)
>>> >
>>> > git add -u
>>> >
>>> > to remove deleted files from git index
>>> >
>>> > then
>>> >
>>> > git commit -m "The message"
>>> >
>>> > I use the command line git (not the git bash), in Windows. There is a
>>> > git.cmd in the program files git install directory, and I added that
>>> > directory to my path, AFAIR
>>> >
>>> > On Sun, Dec 30, 2012 at 4:18 PM, H. Hirzel <[hidden email]>
>>> wrote:
>>> >
>>> >> Hello
>>> >>
>>> >> I am still in the process of learning how to use github. I understand
>>> >> it allows for various kinds of setups and workflows.
>>> >>
>>> >> What I just did is
>>> >>
>>> >> 1) Installed git for Windows   http://msysgit.github.com/
>>> >> 2) Used the 'git bash' command line interface. I think it is easier
>>> >> to
>>> >> use than the GUI in the end. The GUI is a bit confusing to me,
>>> >> whereas
>>> >> using the command line and following instructions like
>>> >> https://help.github.com/articles/fork-a-repo is straightforward
>>> >>
>>> >> 3) I followed the instructions to clone my repository
>>> >>     https://github.com/hhzl/Cuis
>>> >>
>>> >> I had forked recently from
>>> >>
>>> >>     https://github.com/jvuletich/Cuis
>>> >>
>>> >> Then I wanted to get the changes of Juan he did recently.
>>> >>
>>> >> So I did
>>> >>
>>> >>     git remote add upstream https://github.com/jvuletich/Cuis.git
>>> >>
>>> >>     git fetch upstream
>>> >>
>>> >>     git merge upstream/master
>>> >>
>>> >>
>>> >> This gave me a local copy of the file
>>> >>
>>> >>    ListOfCuisPackages.md
>>> >>
>>> >> German and I had made in the last days and which Juan had added in
>>> >> the
>>> >> meantime to his repository.
>>> >>
>>> >> The next thing I would like to figure out how to add a subdirectory
>>> >> 'packages' which is under the control of git and put external *.pck
>>> >> files I have tested there.
>>> >>
>>> >> Regards
>>> >> --Hannes
>>> >>
>>> >> _______________________________________________
>>> >> Cuis mailing list
>>> >> [hidden email]
>>> >> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>> >>
>>> >
>>>
>>> _______________________________________________
>>> Cuis mailing list
>>> [hidden email]
>>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>>
>>
>

> Actually the short instructions on
> https://help.github.com/articles/fork-a-repo are very useful, though a
> bit terse.
>
> I just sucessfully merged Juan's updates from his master branch
> to my master branch.
>
> see https://github.com/jvuletich/Cuis/network
>
> --Hannes
>
>
>
> On 12/31/12, H. Hirzel <[hidden email]> wrote:
>> I am learning to use branches ....
>>
>> I did in my Windows Git bash shell
>>
>>     git checkout -b SimpleLogger
>>
>> This creates a new branch called 'SimpleLogger'  (
>> http://gitimmersion.com/lab_24.html ) and make the new branch active.
>>
>>   cd packages
>>   mkdir SimpleLogger
>>
>> Then I copied in the files from German which I got from
>> https://github.com/garduino/Cuis-SimpleLogger
>>
>>   cd ..
>>
>> and I did
>>   git add .
>>
>> git commit -m "created a branch SimpleLogger and added
>> https://github.com/garduino/Cuis-SimpleLogger"
>>
>> git push origin SimpleLogger
>>
>> The result may be inspected on
>>
>> https://github.com/hhzl/Cuis/
>>
>> It has two branches
>>
>> The branch 'SimpleLogger' has a subdirectory 'SimpleLogger' in the
>> 'packages' directory whereas 'master' does not.
>>
>> I think this is a way to port packages. Do the development in a branch
>> rather than in a separate github repository in a fork of
>> https://github.com/jvuletich/Cuis
>>
>>
>> --Hannes
>>
>>
>>
>>
>>
>>
>> On 12/31/12, Angel Java Lopez <[hidden email]> wrote:
>>> Yes, shared repository model is when you have many committers to the
>>> central repo. They can collaborate to accept and test pull requests,
>>> too.
>>> I
>>> suppose that is alike the Squeak trunk, but I don't know the details.
>>>
>>> On Mon, Dec 31, 2012 at 5:20 AM, H. Hirzel <[hidden email]>
>>> wrote:
>>>
>>>> Thank you Angel. This is helpful.
>>>>
>>>> As for now I changed the file README.md (fixes of the markdown so that
>>>> bullet lists show).
>>>>
>>>> I did in Git bash (under Windows 7) (recalling from memory as the
>>>> command line history is gone because of a restart)
>>>>
>>>> git add README.md
>>>>
>>>> git commit
>>>>
>>>> (I had an error message because user name / email was not set, the
>>>> instructions to do that were included)
>>>>
>>>> and then
>>>>
>>>>     git push origin master
>>>>
>>>>
>>>> whereas origin in this case is
>>>>     https://github.com/hhzl/Cuis
>>>>
>>>> I had set that earlier
>>>>
>>>> and
>>>>    master
>>>> is the main and only branch.
>>>>
>>>>
>>>> I had to struggle a bit with the vim editor which comes with the GIT
>>>> bash shell. But as I want to work on Linux as well I do not mind.
>>>>
>>>> Then I did a pull request on Github by pressing the 'Pull request'
>>>> button in the middle of the second row of https://github.com/hhzl/Cuis
>>>> at the top.
>>>>
>>>> I realize that I now should learn how to create a branch, so that the
>>>> change is done in a branch and not in the 'master' branch.
>>>>
>>>> Happy New Year 2013
>>>>
>>>> --Hannes
>>>>
>>>>
>>>>
>>>>
>>>> NOTE:
>>>> https://help.github.com/articles/using-pull-requests
>>>>
>>>> mentions two popular models
>>>>
>>>> * Fork & Pull
>>>> * Shared Repository Model
>>>>
>>>> It seems that 'Shared Repository Model' is equivalent to the Squeak
>>>> 'Trunk' approach?
>>>>
>>>> At the moment we have the 'Fork & Pull' model. And there seem to be
>>>> more
>>>> models.
>>>>
>>>>
>>>>
>>>>
>>>> On 12/30/12, Angel Java Lopez <[hidden email]> wrote:
>>>> > You can create a directory package.
>>>> >
>>>> > Then, from command line
>>>> >
>>>> > git status
>>>> >
>>>> > to see the changed files
>>>> >
>>>> > git add .
>>>> >
>>>> > to add all pending changed files to index (the pre-commit internal
>>>> > directory of git)
>>>> >
>>>> > git add -u
>>>> >
>>>> > to remove deleted files from git index
>>>> >
>>>> > then
>>>> >
>>>> > git commit -m "The message"
>>>> >
>>>> > I use the command line git (not the git bash), in Windows. There is a
>>>> > git.cmd in the program files git install directory, and I added that
>>>> > directory to my path, AFAIR
>>>> >
>>>> > On Sun, Dec 30, 2012 at 4:18 PM, H. Hirzel <[hidden email]>
>>>> wrote:
>>>> >
>>>> >> Hello
>>>> >>
>>>> >> I am still in the process of learning how to use github. I
>>>> >> understand
>>>> >> it allows for various kinds of setups and workflows.
>>>> >>
>>>> >> What I just did is
>>>> >>
>>>> >> 1) Installed git for Windows   http://msysgit.github.com/
>>>> >> 2) Used the 'git bash' command line interface. I think it is easier
>>>> >> to
>>>> >> use than the GUI in the end. The GUI is a bit confusing to me,
>>>> >> whereas
>>>> >> using the command line and following instructions like
>>>> >> https://help.github.com/articles/fork-a-repo is straightforward
>>>> >>
>>>> >> 3) I followed the instructions to clone my repository
>>>> >>     https://github.com/hhzl/Cuis
>>>> >>
>>>> >> I had forked recently from
>>>> >>
>>>> >>     https://github.com/jvuletich/Cuis
>>>> >>
>>>> >> Then I wanted to get the changes of Juan he did recently.
>>>> >>
>>>> >> So I did
>>>> >>
>>>> >>     git remote add upstream https://github.com/jvuletich/Cuis.git
>>>> >>
>>>> >>     git fetch upstream
>>>> >>
>>>> >>     git merge upstream/master
>>>> >>
>>>> >>
>>>> >> This gave me a local copy of the file
>>>> >>
>>>> >>    ListOfCuisPackages.md
>>>> >>
>>>> >> German and I had made in the last days and which Juan had added in
>>>> >> the
>>>> >> meantime to his repository.
>>>> >>
>>>> >> The next thing I would like to figure out how to add a subdirectory
>>>> >> 'packages' which is under the control of git and put external *.pck
>>>> >> files I have tested there.
>>>> >>
>>>> >> Regards
>>>> >> --Hannes
>>>> >>
>>>> >> _______________________________________________
>>>> >> Cuis mailing list
>>>> >> [hidden email]
>>>> >> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>>> >>
>>>> >
>>>>
>>>> _______________________________________________
>>>> Cuis mailing list
>>>> [hidden email]
>>>> http://jvuletich.org/mailman/listinfo/cuis_jvuletich.org
>>>>
>>>
>>
>