MetacelloSqueakPlatform>>#defaultPlatformAttributes needs an update -

Hi Dale,

The Metacello that is loaded by the ConfigurationOfSeaside3 does not include platform attributes for Squeak 4.6 & 5.0.  


Is there a version that does?


Here is a modified version of the #defaultPlatformAttributes method in the event its not been updated anywhere else:


defaultPlatformAttributes
        | attributes versionString |
        attributes := OrderedCollection with: #squeakCommon with: #squeak.
        Smalltalk
                at: #SystemVersion
                ifPresent: [:cl |
                        versionString := cl current version.
                        (versionString beginsWith: 'Squeak3.10')
                                ifTrue: [attributes add: #'squeak3.10.x'].
                        (versionString beginsWith: 'Squeak4')
                                ifTrue: [attributes add: #'squeak4.x'.
                                        (versionString beginsWith: 'Squeak4.1')
                                                ifTrue: [attributes add: #'squeak4.1.x']
                                                ifFalse: [(versionString beginsWith: 'Squeak4.2')
                                                                ifTrue: [attributes add: #'squeak4.2.x']
                                                                ifFalse: [(versionString beginsWith: 'Squeak4.3')
                                                                        ifTrue: [attributes add: #'squeak4.3.x']
                                                                        ifFalse: [(versionString beginsWith: 'Squeak4.4')
                                                                                ifTrue: [attributes add: #'squeak4.4.x']
                                                                                        ifFalse: [(versionString beginsWith: 'Squeak4.5')
                                                                                                ifTrue: [attributes add: #'squeak4.5.x']
                                                                                                ifFalse: [(versionString beginsWith: 'Squeak4.6')
                                                                                                ifTrue: [attributes add: #'squeak4.6.x']]]]]]].
                        (versionString beginsWith: 'Squeak5') ifTrue:[attributes add: #'squeak5.x']].
        ^ attributes

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

I'm not sure that Metacello has been ported (or port completed) for
Squeak 4.6 and 5.0...

Dale

On 08/20/2015 10:14 AM, Paul DeBruicker wrote:
--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

Dale Henrichs-3 wrote

I'm not sure that Metacello has been ported (or port completed) for
Squeak 4.6 and 5.0...

Dale

OK, well with that change Seaside loads, so its not far off regardless. I'll load the tests and see if anything is breaking.   The Seaside script loads Metacello from  'http://www.squeaksource.com/MetacelloRepository' 
or 'http://seaside.gemstone.com/ss/metacello'.  Is that the best place to grab the latest stable version?

Paul,

I think that Metacello should be installed into squeak using the
github-based instructions[1]. Especially for Seaside3 since I'm pretty
sure that the configuration uses some of the advanced features ...

FWIW I think that Tobias Pape is trying to get Metacello pre-installed
in Squeak so that the long involved install is not necessary ....

We can look at this at Camp Smalltalk (PDX) if you want ..

Dale

[1] https://github.com/dalehenrich/metacello-work#squeak

On 08/20/2015 10:41 AM, Paul DeBruicker wrote:
--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

On 20.08.2015, at 20:54, Dale Henrichs <[hidden email]> wrote:

> Paul,
>
> I think that Metacello should be installed into squeak using the github-based instructions[1]. Especially for Seaside3 since I'm pretty sure that the configuration uses some of the advanced features ...
>

See https://github.com/dalehenrich/metacello-work/pull/357

Best regards
        -Tobias




--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

On 08/20/2015 12:03 PM, Tobias Pape wrote:
But....the .travis.yml file doesn't have entries for Squeak4.6 or
Squeak5.0, so I don't know (via running tests with travis) that
Metacello works on those releases[1] ...

Dale

[1]
https://github.com/dalehenrich/metacello-work/pull/357#issuecomment-128866583

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

On 20.08.2015, at 21:07, Dale Henrichs <[hidden email]> wrote:

I know, sorry, I was just pointing out that code exists.
At that point in time, the releases did actually not exist yet, so
I deferred that. Hence my inexcusable silence.



> Dale
>
> [1] https://github.com/dalehenrich/metacello-work/pull/357#issuecomment-128866583



--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

On 08/20/2015 12:33 PM, Tobias Pape wrote:
I guess the big question at this moment is: "how much work is required
to get Metacello running on Squeak4.6 and Squeak5.0?"

Barring significant changes in the API, Metacello should be expected to
run and pass the majority of tests, right?

Dale

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

On 20.08.2015, at 21:37, Dale Henrichs <[hidden email]> wrote:

Yes.
I have used it already :)



--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.