Monticello management automatically

Hi,

        i work with Pharo 1.4.


        I have some packages and i use Monticello browser to save these into fileTree:///Volumes/DTRRepository


        After with metacello ConfigurationOfDtrBase   i load this package into GLASS environment.

        baseline10: spec
        <version: '1.0-baseline'>
       
        spec for: #gemstone do: [
                spec package: 'DTROnlyForOODB'with:[
                        spec repository: 'filetree:///Volumes/DTRRepository'.]
        ] .

        spec for: #pharo do: [
                spec package: 'DTRMock'with:[
                        spec repository: 'filetree:///Volumes/DTRRepository'.]
        ] .

       
        spec for: #common do: [
               
                spec repository:'filetree:///Volumes/DTRRepository'.
                spec package: 'DtrRedu'. " Personalizzazioni base da verificare "
                spec package: 'DTRCore' with:[ spec requires:#( 'DtrRedu')]. " Gestione integrazioni di sistema "
                spec package: 'DtrBase' with:[ spec requires:#( 'DTRCore')]." Gestione base "
                 spec package: 'DTRMetaDb' with:[ spec requires:#( 'DtrBase')]
               
               

       
        Now i have a new server  and i need to save the same packages on it   fileTree:///Volumes/SCNRepository

        But it's complicate manage all with Monticello browser  ( add repository - save the new version on the two server ecc ecc.  )

        My questions is:   i can create a script for save and update automatically the packages in the two repository ?


        Any considerations - reference are welcome,

        Thanks,

                Dario

       

       

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

Dale,

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

To create a BaselineOf from a ConfigruationOf you would create BaselineOfDtrBase as a subclass of BaselinOf and then copy the #baseline10: method from ConfigurationOfDtrBase into BaselineOfDtrBase and change it to the following:

        baseline10: spec

        <baseline>

        spec for: #gemstone do: [

                spec package: 'DTROnlyForOODB' 

]

        ] .

        spec for: #pharo do: [

                spec package: 'DTRMock'

]

        ] .

        spec for: #common do: [

 

               spec package: 'DtrRedu'. " Personalizzazioni base da verificare "

                spec package: 'DTRCore' with:[ spec requires:#( 'DtrRedu')]. " Gestione integrazioni di sistema "

                spec package: 'DtrBase' with:[ spec requires:#( 'DTRCore')]." Gestione base "

                 spec package: 'DTRMetaDb' with:[ spec requires:#( 'DtrBase')]

rename method, use <baseline> instead of <version: ...> and remove the repository: statements ...

So a dev cycle would go like the following:

  1. develop in Pharo.

  2. save packages to filetree repo in git repository

  3. at bash shell prompt `git add .` then `git commit ....` then `git push ...

  4. log into other server

  5. if you are using tODE you will be able to the `pull` from the `project list`

      and you will be able to load the packages into gemstone using `load` from

      the project list ...

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.

Dale,

On Mon, Dec 15, 2014 at 12:46 AM, Dario Trussardi <[hidden email]> wrote:

Dale,

I was looking for the package version. ConfigurationOfMetacello-dkh.800 is the latest package version and I am suspicioues that you are using a different version of the configuration... at the very least I want to rule that out ....

The Pharo 1.4  Monticello report  ConfigurationOfMetacello-dkh.800.

Interesting ... I guess I will need more debugging information to figure this one out ...

But for understund the deveIopment cycle i  create a Pharo 3.0  image.

 

the system open the error as write in my previous e-mail.

I am using Pharo1.4 -  Latest update: #14457.... What version of Pharo1.4 are you using?

I am using Pharo1.4 Latest update: #14445

Perhaps you should start with a fresh Pharo1.4 and run the script there first?

It's complicate for me port now all my environment in a new image.

I do this for follow your indications:

" Are you comfortable working with git? If you are then I would say that you should use git to save versions of your packages and then replace ConfigurationOfDtrBase with a BaselineOfDtrBase. When using a BaselineOf it is not necessary to continuously modify the package versions. To use a BaselineOf you need to install a recent version of Metacello in Pharo1.4 and you can do that following these install instructions[1]. "

 I open a git repository on Bitbucket but with this complication

  i do not know how to handle the BaselineOfDtrBase configuration.

Mail me a copy of your ConfigurationOfDtrBase and your current  BaselineOfDtrBase (if you have one) and I'll whip one oup for you ...

As you write: 

To create a BaselineOf from a ConfigruationOf you would create BaselineOfDtrBase as a subclass of BaselinOf and then copy the #baseline10: method from ConfigurationOfDtrBase into BaselineOfDtrBase and change it to the following:

        baseline10: spec

        <baseline>

        spec for: #gemstone do: [

                spec package: 'DTROnlyForOODB' 

]

        ] .

        spec for: #pharo do: [

                spec package: 'DTRMock'

]

        ] .

        spec for: #common do: [

 

               spec package: 'DtrRedu'. " Personalizzazioni base da verificare "

                spec package: 'DTRCore' with:[ spec requires:#( 'DtrRedu')]. " Gestione integrazioni di sistema "

                spec package: 'DtrBase' with:[ spec requires:#( 'DTRCore')]." Gestione base "

                 spec package: 'DTRMetaDb' with:[ spec requires:#( 'DtrBase')]

rename method, use <baseline> instead of <version: ...> and remove the repository: statements ...

So a dev cycle would go like the following:

  1. develop in Pharo.

  2. save packages to filetree repo in git repository

  3. at bash shell prompt `git add .` then `git commit ....` then `git push ...

 

Into Phar0 3.0 i  create a Baseline subclass BaselineOfProva

with:

baseline10: spec 

<baseline>

spec for: #common do: [

spec package: 'DTRPackage1'.

spec package: 'DTRPackage2'. 

spec package: 'DTRPackage3'.

spec package: 'DTRPackage1A' with:[ spec requires:#( 'DTRPackage1')]

 ].

and  do the  git command :  add    commit  push

  4. log into other server

In the other server i do the git  pull command

  5. if you are using tODE you will be able to the `pull` from the `project list`

      and you will be able to load the packages into gemstone using `load` from

      the project list ...

But for the first three point i need update the Pharo 1.4  with: [1] ?

Yes, you need to get use the Metacello Scripting apit and that means getting to the most recent version of Metacello ... I've been able to load Metacello into  a stock version of Pharo1.4, so it should be possible to get Metacello loaded into your image ... it might make sense to mail me a copy of your image, so that I figure out what's wrong first hand ....

For the point 3:  every time, into Pharo,  i update one package i need to do the relative git add  command ?

When I work from Pharo, i write out all of the dirty packages and do `git add ...` and then `git commit ...`, so you can make a bunch of edits to the git repository and you only need to do the add command before you commit ....
 

For point 5: Can you explain what command use into tODE?

The `project list` brings up a  project browser and the `pull` is menu item on the project browser

If i use Gemtools what i need to do for load package into Gemstone ? ( I have to use tODE because only it support git repository? )

If you are using GemTools, then you will work like you do with Pharo and do all of your git manipulations from the bash shell command line ..

Into Gemtools    with Monticello i load the package with the BaselineOfProva  class.

Now i don't understund what i need do to load the package defined into 

 baseline10: spec 

<baseline>

if i do the command:   ( BaselineOfProva project version )  load

the system answer:

   a MetacelloPackageSpecResolutionError occurred (error 2710), Could not resolve: DTRPackage1 [DTRPackage1] in cache - G/S[Scandella3106:2]

To load a baseline you need to using the Scripting API:

  Metacello new
    baseline: 'Prova';
    repository: 'filetree:///.......';
    get;
    load.

The `get` command refreshes the baseline from the repository and the `load` command loads the baseline ...

Dale

--
You received this message because you are subscribed to the Google Groups "Metacello" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.