Re: [Seaside] BlockClosure>>processHttp {*KomHttpServer}

> Thanks by the response Philippe, will check.
>
> Cheers.
>
> 2011/2/7 Philippe Marschall <[hidden email]>:
>> 2011/2/7 Germán Arduino <[hidden email]>:
>>> Hi Folks:
>>>
>>> Working with xmlrpc, at server level, I noted that even the latest
>>> version of Komanche (KomHttpServer-pmm.63) use #fixTemps (for example
>>> in #procesHttp method in BlockClosure). Being that #fixTemps is
>>> deprecated, is correct that is already there?
>>
>> Nope it isn't. It should be on BlockContext but not BlockClosure it
>> fixed that a while ago but apparently missed one. Anyway
>> KomHttpServer-pmm.64 should be good.
>>
>> Cheers
>> Philippe
>> _______________________________________________
>> seaside mailing list
>> [hidden email]
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>
>

> Hi:
>
> I added a new ConfigurationOfKomHttpServer:
>
> Added version '1.0.8'. It load KomHttpServer-pmm.64.mcz that solves
> the deprecated #fixTemps in BlockClosure>>processHttp.
>
> I not modified the #stable version, then to load the 1.0.8 call:
>
> (ConfigurationOfKomHttpServer project version:'1.0.8') load.
>
> Cheers.
>
>
> 2011/2/7 Germán Arduino<[hidden email]>:
>> Thanks by the response Philippe, will check.
>>
>> Cheers.
>>
>> 2011/2/7 Philippe Marschall<[hidden email]>:
>>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>> Hi Folks:
>>>>
>>>> Working with xmlrpc, at server level, I noted that even the latest
>>>> version of Komanche (KomHttpServer-pmm.63) use #fixTemps (for example
>>>> in #procesHttp method in BlockClosure). Being that #fixTemps is
>>>> deprecated, is correct that is already there?
>>>
>>> Nope it isn't. It should be on BlockContext but not BlockClosure it
>>> fixed that a while ago but apparently missed one. Anyway
>>> KomHttpServer-pmm.64 should be good.
>>>
>>> Cheers
>>> Philippe
>>> _______________________________________________
>>> seaside mailing list
>>> [hidden email]
>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>>
>>

> Germán,
>
> Good. I am working on the configuration for Seaside3.0.4 and in the process
> I will make sure that all of the symbolic versions are updated correctly ...
> The Seaside3.0.4 configuration will make use of symbolic versions whereever
> necessary.
>
> Dale
>
> On 02/15/2011 10:11 AM, Germán Arduino wrote:
>>
>> Hi:
>>
>> I added a new ConfigurationOfKomHttpServer:
>>
>> Added version '1.0.8'. It load KomHttpServer-pmm.64.mcz that solves
>> the deprecated #fixTemps in BlockClosure>>processHttp.
>>
>> I not modified the #stable version, then to load the 1.0.8 call:
>>
>> (ConfigurationOfKomHttpServer project version:'1.0.8') load.
>>
>> Cheers.
>>
>>
>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>
>>> Thanks by the response Philippe, will check.
>>>
>>> Cheers.
>>>
>>> 2011/2/7 Philippe Marschall<[hidden email]>:
>>>>
>>>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>>>
>>>>> Hi Folks:
>>>>>
>>>>> Working with xmlrpc, at server level, I noted that even the latest
>>>>> version of Komanche (KomHttpServer-pmm.63) use #fixTemps (for example
>>>>> in #procesHttp method in BlockClosure). Being that #fixTemps is
>>>>> deprecated, is correct that is already there?
>>>>
>>>> Nope it isn't. It should be on BlockContext but not BlockClosure it
>>>> fixed that a while ago but apparently missed one. Anyway
>>>> KomHttpServer-pmm.64 should be good.
>>>>
>>>> Cheers
>>>> Philippe
>>>> _______________________________________________
>>>> seaside mailing list
>>>> [hidden email]
>>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>>>
>>>
>
>

> Hi Dale!
>
> I was precisely thinking about this question.....who decides what
> version is #stable for example (in a package that is not owned by the
> guy that modify the configuration)? I was tempted of qualify as
> #stable the 1.0.8 of Kom because includes the #fixTemps fix,
> but....but who knows the other implications that they may bring.
>
> Just thinking about......
>
> Germán.
>
> 2011/2/15 Dale Henrichs<[hidden email]>:
>> Germán,
>>
>> Good. I am working on the configuration for Seaside3.0.4 and in the process
>> I will make sure that all of the symbolic versions are updated correctly ...
>> The Seaside3.0.4 configuration will make use of symbolic versions whereever
>> necessary.
>>
>> Dale
>>
>> On 02/15/2011 10:11 AM, Germán Arduino wrote:
>>>
>>> Hi:
>>>
>>> I added a new ConfigurationOfKomHttpServer:
>>>
>>> Added version '1.0.8'. It load KomHttpServer-pmm.64.mcz that solves
>>> the deprecated #fixTemps in BlockClosure>>processHttp.
>>>
>>> I not modified the #stable version, then to load the 1.0.8 call:
>>>
>>> (ConfigurationOfKomHttpServer project version:'1.0.8') load.
>>>
>>> Cheers.
>>>
>>>
>>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>>
>>>> Thanks by the response Philippe, will check.
>>>>
>>>> Cheers.
>>>>
>>>> 2011/2/7 Philippe Marschall<[hidden email]>:
>>>>>
>>>>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>>>>
>>>>>> Hi Folks:
>>>>>>
>>>>>> Working with xmlrpc, at server level, I noted that even the latest
>>>>>> version of Komanche (KomHttpServer-pmm.63) use #fixTemps (for example
>>>>>> in #procesHttp method in BlockClosure). Being that #fixTemps is
>>>>>> deprecated, is correct that is already there?
>>>>>
>>>>> Nope it isn't. It should be on BlockContext but not BlockClosure it
>>>>> fixed that a while ago but apparently missed one. Anyway
>>>>> KomHttpServer-pmm.64 should be good.
>>>>>
>>>>> Cheers
>>>>> Philippe
>>>>> _______________________________________________
>>>>> seaside mailing list
>>>>> [hidden email]
>>>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>>>>
>>>>
>>
>>

> Germán,
>
> If folks are _supposed_ to use the version that you have just created, then
> it is correct to define it as #stable.
>
> In the past, whenever you (or anyone else) released a new version (i.e.,
> blessing was not #development, #broken, or #baseline) everyone that loaded
> the package using #latestVersion would pick up your version ... and noone
> ever thought of the implications.
>
> Now that we have a #stable symbolic version folks are thinking of the
> implications of their actions:)

>
> That is good, because when specifying a version as #stable, you must think
> about the target platforms and the versions of the particular platforms.
>
> If the change you have made was aimed at making Kom run on Pharo1.2, then it
> makes sense to declare that your new version is #stable for Pharo1.2.
>
> If you have only tested your change on Pharo1.2 (for example), then it would
> be prudent to declare 1.0.8 as stable for Pharo1.2, even if you _think_ that
> it will work on all supported platforms.
>
> If you are comfortable that the change you have made applies to all
> supported platforms, then declare 1.0.8 as #stable for #common....
>

>
> Dale
>
> On 02/15/2011 01:02 PM, Germán Arduino wrote:
>>
>> Hi Dale!
>>
>> I was precisely thinking about this question.....who decides what
>> version is #stable for example (in a package that is not owned by the
>> guy that modify the configuration)? I was tempted of qualify as
>> #stable the 1.0.8 of Kom because includes the #fixTemps fix,
>> but....but who knows the other implications that they may bring.
>>
>> Just thinking about......
>>
>> Germán.
>>
>> 2011/2/15 Dale Henrichs<[hidden email]>:
>>>
>>> Germán,
>>>
>>> Good. I am working on the configuration for Seaside3.0.4 and in the
>>> process
>>> I will make sure that all of the symbolic versions are updated correctly
>>> ...
>>> The Seaside3.0.4 configuration will make use of symbolic versions
>>> whereever
>>> necessary.
>>>
>>> Dale
>>>
>>> On 02/15/2011 10:11 AM, Germán Arduino wrote:
>>>>
>>>> Hi:
>>>>
>>>> I added a new ConfigurationOfKomHttpServer:
>>>>
>>>> Added version '1.0.8'. It load KomHttpServer-pmm.64.mcz that solves
>>>> the deprecated #fixTemps in BlockClosure>>processHttp.
>>>>
>>>> I not modified the #stable version, then to load the 1.0.8 call:
>>>>
>>>> (ConfigurationOfKomHttpServer project version:'1.0.8') load.
>>>>
>>>> Cheers.
>>>>
>>>>
>>>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>>>
>>>>> Thanks by the response Philippe, will check.
>>>>>
>>>>> Cheers.
>>>>>
>>>>> 2011/2/7 Philippe Marschall<[hidden email]>:
>>>>>>
>>>>>> 2011/2/7 Germán Arduino<[hidden email]>:
>>>>>>>
>>>>>>> Hi Folks:
>>>>>>>
>>>>>>> Working with xmlrpc, at server level, I noted that even the latest
>>>>>>> version of Komanche (KomHttpServer-pmm.63) use #fixTemps (for example
>>>>>>> in #procesHttp method in BlockClosure). Being that #fixTemps is
>>>>>>> deprecated, is correct that is already there?
>>>>>>
>>>>>> Nope it isn't. It should be on BlockContext but not BlockClosure it
>>>>>> fixed that a while ago but apparently missed one. Anyway
>>>>>> KomHttpServer-pmm.64 should be good.
>>>>>>
>>>>>> Cheers
>>>>>> Philippe
>>>>>> _______________________________________________
>>>>>> seaside mailing list
>>>>>> [hidden email]
>>>>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>>>>>
>>>>>
>>>
>>>
>
>