Login  Register

Stone does not start but Netldi runs ok

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
5 messages Options Options
Embed post
Permalink
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Stone does not start but Netldi runs ok

GLASS mailing list
4138 posts
Hi,


The GS DevKit installation with GemStone 3.4.1 was running ok. After stoping
the system i can not start it again.

startNetldi devKit_34 "this runs ok"

startStone devKit_34 "this is failing - right now searching a solution"

stopstone[Error]: Server 'devKit_34' is not a stone.
Error on or near line 22 :: stopGemstone  :: stopGemstone
Error on or near line 21 :: startGemstone  :: startGemstone
Error: Shell command:
'/home/gemstone/GsDevKit_home/server/bin/gs/startGemstone' failed.
GsDevKitStartstoneCommandLineHandler class(Object)>>error:
GsDevKitStartstoneCommandLineHandler
class(GsDevKitAbstractCommandLineHandler
class)>>runShellCommand:args:noError:
GsDevKitStartstoneCommandLineHandler(GsDevKitAbstractCommandLineHandler)>>runShellCommand:args:
GsDevKitStartstoneCommandLineHandler>>activate
GsDevKitStartstoneCommandLineHandler class(CommandLineHandler
class)>>activateWith:
PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand: in
Block: [ aCommandLinehandler activateWith: commandLine ]
BlockClosure>>on:do:
PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand:
PharoCommandLineHandler(BasicCommandLineHandler)>>handleSubcommand
PharoCommandLineHandler(BasicCommandLineHandler)>>handleArgument:
PharoCommandLineHandler(BasicCommandLineHandler)>>activate in Block: [ self
handleArgument: (self arguments ifEmpty: [ ...etc...
BlockClosure>>on:do:
PharoCommandLineHandler(BasicCommandLineHandler)>>activate
PharoCommandLineHandler>>activate
PharoCommandLineHandler class(CommandLineHandler class)>>activateWith:
PharoCommandLineHandler class>>activateWith: in Block: [ super activateWith:
aCommandLine ]
WorldState>>runStepMethodsIn:
WorldMorph>>runStepMethods
WorldState>>doOneCycleNowFor:
WorldState>>doOneCycleFor:
WorldMorph>>doOneCycle
MorphicUIManager>>spawnNewProcess in Block: [ ...
BlockClosure>>newProcess in Block: [ ...
Error on or near line 99 :: devKitCommandLine startstone devKit_34 ::
devKitCommandLine startstone devKit_34
Error on or near line 116 :: startStone devKit_34 :: startStone devKit_34

regards,
bruno



--
Sent from: http://forum.world.st/GLASS-f1460844.html
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: Stone does not start but Netldi runs ok

GLASS mailing list
4138 posts
Hi,

After searching a little bit i found:
http://forum.world.st/Re-Error-Stoping-stone-Will-not-restart-td4965680.html
/Also ensure any stale files in /opt/gemstone/locks/ other than
the gemstone.hostid file are deleted. If no netldi nor stones running,
only file gemstone.hostid should exist in /opt/gemstone/locks ./

And deleting some file at /opt/gemstone/locks/ the stone start without
problems.

But the message error "Server 'devKit_34' is not a stone" is a little
confusing :)

regards,
bruno




--
Sent from: http://forum.world.st/GLASS-f1460844.html
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: Stone does not start but Netldi runs ok

GLASS mailing list
4138 posts
In reply to this post by GLASS mailing list
Bruno,

I would like to see more of the `startStone devKit_34` command output ..
there are several scripts involved and they are invoked from the
devKitCommandLine pharo image I'm particularly interested in the output
thate precedes the `stopstone[Error]: Server 'devKit_34' is not a
stone.` line, as I would like more context ...

Dale

On 12/13/18 4:26 AM, BrunoBB via Glass wrote:

> Hi,
>
>
> The GS DevKit installation with GemStone 3.4.1 was running ok. After stoping
> the system i can not start it again.
>
> startNetldi devKit_34 "this runs ok"
>
> startStone devKit_34 "this is failing - right now searching a solution"
>
> stopstone[Error]: Server 'devKit_34' is not a stone.
> Error on or near line 22 :: stopGemstone  :: stopGemstone
> Error on or near line 21 :: startGemstone  :: startGemstone
> Error: Shell command:
> '/home/gemstone/GsDevKit_home/server/bin/gs/startGemstone' failed.
> GsDevKitStartstoneCommandLineHandler class(Object)>>error:
> GsDevKitStartstoneCommandLineHandler
> class(GsDevKitAbstractCommandLineHandler
> class)>>runShellCommand:args:noError:
> GsDevKitStartstoneCommandLineHandler(GsDevKitAbstractCommandLineHandler)>>runShellCommand:args:
> GsDevKitStartstoneCommandLineHandler>>activate
> GsDevKitStartstoneCommandLineHandler class(CommandLineHandler
> class)>>activateWith:
> PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand: in
> Block: [ aCommandLinehandler activateWith: commandLine ]
> BlockClosure>>on:do:
> PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand:
> PharoCommandLineHandler(BasicCommandLineHandler)>>handleSubcommand
> PharoCommandLineHandler(BasicCommandLineHandler)>>handleArgument:
> PharoCommandLineHandler(BasicCommandLineHandler)>>activate in Block: [ self
> handleArgument: (self arguments ifEmpty: [ ...etc...
> BlockClosure>>on:do:
> PharoCommandLineHandler(BasicCommandLineHandler)>>activate
> PharoCommandLineHandler>>activate
> PharoCommandLineHandler class(CommandLineHandler class)>>activateWith:
> PharoCommandLineHandler class>>activateWith: in Block: [ super activateWith:
> aCommandLine ]
> WorldState>>runStepMethodsIn:
> WorldMorph>>runStepMethods
> WorldState>>doOneCycleNowFor:
> WorldState>>doOneCycleFor:
> WorldMorph>>doOneCycle
> MorphicUIManager>>spawnNewProcess in Block: [ ...
> BlockClosure>>newProcess in Block: [ ...
> Error on or near line 99 :: devKitCommandLine startstone devKit_34 ::
> devKitCommandLine startstone devKit_34
> Error on or near line 116 :: startStone devKit_34 :: startStone devKit_34
>
> regards,
> bruno
>
>
>
> --
> Sent from: http://forum.world.st/GLASS-f1460844.html
> _______________________________________________
> Glass mailing list
> [hidden email]
> http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: Stone does not start but Netldi runs ok

GLASS mailing list
4138 posts
In reply to this post by GLASS mailing list
Glad you figured things out ... as an FYI, the `$GS_HOME/bin/stones`
command runs a `$GEMSTONE/bin/gslist -lc` and the `-c` arg to gslist
cleans up stale lock files ...

I may decide to add a `gslist -c` to the startStone command[1] to avoid
this type of issue in the future ...

Dale

[1] https://github.com/GsDevKit/GsDevKit_home/issues/223

On 12/13/18 5:07 AM, BrunoBB via Glass wrote:

> Hi,
>
> After searching a little bit i found:
> http://forum.world.st/Re-Error-Stoping-stone-Will-not-restart-td4965680.html
> /Also ensure any stale files in /opt/gemstone/locks/ other than
> the gemstone.hostid file are deleted. If no netldi nor stones running,
> only file gemstone.hostid should exist in /opt/gemstone/locks ./
>
> And deleting some file at /opt/gemstone/locks/ the stone start without
> problems.
>
> But the message error "Server 'devKit_34' is not a stone" is a little
> confusing :)
>
> regards,
> bruno
>
>
>
>
> --
> Sent from: http://forum.world.st/GLASS-f1460844.html
> _______________________________________________
> Glass mailing list
> [hidden email]
> http://lists.gemtalksystems.com/mailman/listinfo/glass
_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: Stone does not start but Netldi runs ok

GLASS mailing list
4138 posts
Dale,

Thanks for the info.

My bad because to check /opt/gemstone/locks/ is the first thing i should
do but the title was little misleading :)

I take note of: gslist -lc

regards,
bruno

El 14/12/2018 a las 14:53, Dale Henrichs via Glass escribió:

> Glad you figured things out ... as an FYI, the `$GS_HOME/bin/stones`
> command runs a `$GEMSTONE/bin/gslist -lc` and the `-c` arg to gslist
> cleans up stale lock files ...
>
> I may decide to add a `gslist -c` to the startStone command[1] to
> avoid this type of issue in the future ...
>
> Dale
>
> [1] https://github.com/GsDevKit/GsDevKit_home/issues/223
>
> On 12/13/18 5:07 AM, BrunoBB via Glass wrote:
>> Hi,
>>
>> After searching a little bit i found:
>> http://forum.world.st/Re-Error-Stoping-stone-Will-not-restart-td4965680.html 
>>
>> /Also ensure any stale files in /opt/gemstone/locks/ other than
>> the gemstone.hostid file are deleted. If no netldi nor stones running,
>> only file gemstone.hostid should exist in /opt/gemstone/locks ./
>>
>> And deleting some file at /opt/gemstone/locks/ the stone start without
>> problems.
>>
>> But the message error "Server 'devKit_34' is not a stone" is a little
>> confusing :)
>>
>> regards,
>> bruno
>>
>>
>>
>>
>> --
>> Sent from: http://forum.world.st/GLASS-f1460844.html
>> _______________________________________________
>> Glass mailing list
>> [hidden email]
>> http://lists.gemtalksystems.com/mailman/listinfo/glass
> _______________________________________________
> Glass mailing list
> [hidden email]
> http://lists.gemtalksystems.com/mailman/listinfo/glass


---
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
https://www.avast.com/antivirus

_______________________________________________
Glass mailing list
[hidden email]
http://lists.gemtalksystems.com/mailman/listinfo/glass